ERC FUNDED PROJECTS

Biomechanical interactions between cells and their environment are essential in almost any biological process, from embryonic development to organ function to diseases. Hence, biomechanical interactions are crucial for health and disease. Examples are hydrodynamic interactions through fluid flow, and forces acting directly on cells. Existing methods to analyze and understand these interactions are limited however, since they do not offer the required combination of precisely controlled flow and accurate applying and sensing of forces. Also, they often lack a physiological environment. A breakthrough in biomechanical analysis is therefore highly needed. We will realize a novel microfluidic platform for biomechanical analysis with unprecedented possibilities of controlling fluid flow and applying and sensing time-dependent forces at subcellular scales in controlled environments. The platform will be uniquely based on bio-inspired magnetic artificial cilia, rather than on conventional microfluidic valves and pumps. Cilia are microscopic hairs ubiquitously present in nature, acting both as actuators and sensors, essential for swimming of microorganisms, transport of dirt out of our airways, and sensing of sound, i.e. they exactly fulfill functions needed in biomechanical analysis. We will develop novel materials and fabrication methods to realize microscopic polymeric artificial cilia, and integrate these in microfluidic devices. Magnetic actuation and optical readout systems complete the platform. We will apply the novel platform to address three fundamental and unresolved biomechanical questions: 1. How do hydrodynamic interactions with actuated cilia steer cellular and particle transport? 2. How do local and dynamic mechanical forces on cells fundamentally influence their motility and differentiation? 3. How do hydrodynamic interactions between cilia steer embryonic development? This unique platform will enable to address many other future biomechanical questions.

3 083 625 €

Start date: 2019-10-01, End date: 2024-09-30

A wide variety of natural phenomena and technological applications involve flow, transport and chemical reactions taking place on or near fluid-solid or fluid-fluid interfaces. From gravity currents under water and lava flows to heat and mass transport processes in engineering applications and to the rapidly developing field of microfluidics. Both equilibrium properties of a fluid and transportcoefficients are modified in the vicinity of interfaces. The effect of these changes is crucial in the behavior of ultra-thin fluidfilms and fluid motion in microchannels of micro-electromechanical systems, but is essential as well in macroscopic phenomena involving interfacial singularities, such as thin-film rupture and motion of three-phase contact lines associated e.g. with droplet spreading. Interface boundaries are mesoscopic structures. While material properties vary smoothly at macroscopic distances from an interface, gradients in the normal direction of conserved parameters, such as density, are steep with strong variations as the molecular scale in the neighborhood of the interface is approached. This brings about a contradiction between the need in macroscopic description and a necessity to take into consideration microscopic factors that come to influence the fluid motion and transport on incommensurately larger scales. The aim of the proposed research is to develop a class of novel continuous models bridging the gap between molecular dynamics and conventional hydrodynamics and applicable at mesoscopic distances from gas-liquid and fluid-solid interfaces. A combination of analytical techniques, numerical modeling and computer-aided multiscale analysis will be employed. The results of the proposed work will greatly contribute to the fundamental understanding of mesoscopic non-equilibrium phenomena in the vicinity of interfaces and to the development of novel computational methods combining the advantages of molecular and continuous models.

1 273 788 €

Start date: 2010-04-01, End date: 2016-03-31

The project’s overall target is to arrive at a fundamental understanding of electrolyte thermodynamics and thus enable the engineering of a new generation of useful, physically sound models for electrolyte solutions. These models should be general and applicable to a very wide range of conditions so that they can be potentially used for a wide range of applications. Electrolyte solutions are present almost anywhere and find numerous applications in physical sciences including chemistry, geology, material science, medicine, biochemistry and physiology as well as in many engineering fields especially chemical & biochemical, electrical and petroleum engineering. In all these applications the thermodynamics plays a crucial role over wide ranges of temperature, pressure and composition. As the subject is important, a relatively large body of knowledge has been accumulated with lots of data and models. However, disappointingly the state-of-the art thermodynamic models used today in engineering practice are semi-empirical and require numerous experimental data. They lack generality and have not enhanced our understanding of electrolyte thermodynamics. Going beyond the current state of the art, we will create the scientific foundation for studying, at their extremes, both “primitive” and “non-primitive” approaches for electrolyte solutions and identify strengths and limitations. The project is based on the PI’s many years of experience in thermodynamics. The ambition is to make new advances to clarify major questions and misunderstandings in electrolyte thermodynamics, some remaining for over 100 years, which currently prevent real progress from being made, and create a new paradigm which will ultimately pave the way for the development of new engineering models for electrolyte solutions. This is a risky, ambitious and crucial task, but a successful completion will have significant benefits in many industrial sectors as well as in environmental studies and biotechnology.

2 500 000 €

Start date: 2019-09-01, End date: 2024-08-31

We propose to engineer stable-highly luminescent heterostructures based on defect tolerant benign perovskites and their integration into efficient planar/thin film optoelectronic devices. Primary targeted devices are: blue and white planar electroluminescent devices, high efficiency solar cells and electrically pumped lasers. We will use processing methods that are compatible with large area industrial processes, in particular focusing on vapour deposition using thermal sublimation of the perovskite precursors. The boundaries of this simple, scalable and economic coating method will be determined using an advanced real time in-situ optical monitoring system based on hyperspectral imaging. This tool will unveil the limits and processing conditions for the preparation of uniform and very thin (< 10 nm) crystalline thin-film semiconductors. We will also attempt to replace the toxic lead in today’s most studied perovskite materials, by less toxic materials such as tin and silver/bismuth mixtures. Here vacuum based processing is beneficial in view of the limited air-stability and solubility of their pre-cursor salts. Accurate vapour deposition methods will allow the fabrication of perovskites in multiple layered heterostructures (MLH) that passivate the perovskite crystal boundaries. This will increase their thermal and structural stability and above all their photoluminescence efficiency. With the sophisticated processing control, multiple quantum wells (MQWs) will be engineered. MQWs are promising for light-emitting devices, in particular for lasers. The impact of the project is large on various fields ranging from processes, materials and device engineering, physics, and energy. High efficiency, planar LEDs and solar cells, can shift the energy landscape and strongly help to meet the worlds CO2 reduction targets. The demonstration of electrically pumped lasing in easily processed thin film semiconductors will generate so far un-available fields of science.

2 499 175 €

Start date: 2019-09-01, End date: 2024-08-31