Project acronym 3D-FABRIC
Project 3D Flow Analysis in Bijels Reconfigured for Interfacial Catalysis
Researcher (PI) Martin F. HAASE
Host Institution (HI) UNIVERSITEIT UTRECHT
Call Details Starting Grant (StG), PE8, ERC-2018-STG
Summary The objective of this proposal is to determine the unknown criteria for convective cross-flow in bicontinuous interfacially jammed emulsion gels (bijels). Based on this, we will answer the question: Can continuously operated interfacial catalysis be realized in bijel cross-flow reactors? Demonstrating this potential will introduce a broadly applicable chemical technology, replacing wasteful chemical processes that require organic solvents. We will achieve our objective in three steps:
(a) Control over bijel structure and properties. Bijels will be formed with a selection of functional inorganic colloidal particles. Nanoparticle surface modifications will be developed and extensively characterized. General principles for the parameters determining bijel structures and properties will be established based on confocal and electron microscopy characterization. These principles will enable unprecedented control over bijel formation and will allow for designing desired properties.
(b) Convective flow in bijels. The mechanical strength of bijels will be tailored and measured. With mechanically robust bijels, the influence of size and organization of oil/water channels on convective mass transfer in bijels will be investigated. To this end, a bijel mass transfer apparatus fabricated by 3d-printing of bijel fibers and soft photolithography will be introduced. In conjunction with the following objective, the analysis of convective flows in bijels will facilitate a thorough description of their structure/function relationships.
(c) Biphasic chemical reactions in STrIPS bijel cross-flow reactors. First, continuous extraction in bijels will be realized. Next, conditions to carry out continuously-operated, phase transfer catalysis of well-known model reactions in bijels will be determined. Both processes will be characterized in-situ and in 3-dimensions by confocal microscopy of fluorescent phase transfer reactions in transparent bijels.
Summary
The objective of this proposal is to determine the unknown criteria for convective cross-flow in bicontinuous interfacially jammed emulsion gels (bijels). Based on this, we will answer the question: Can continuously operated interfacial catalysis be realized in bijel cross-flow reactors? Demonstrating this potential will introduce a broadly applicable chemical technology, replacing wasteful chemical processes that require organic solvents. We will achieve our objective in three steps:
(a) Control over bijel structure and properties. Bijels will be formed with a selection of functional inorganic colloidal particles. Nanoparticle surface modifications will be developed and extensively characterized. General principles for the parameters determining bijel structures and properties will be established based on confocal and electron microscopy characterization. These principles will enable unprecedented control over bijel formation and will allow for designing desired properties.
(b) Convective flow in bijels. The mechanical strength of bijels will be tailored and measured. With mechanically robust bijels, the influence of size and organization of oil/water channels on convective mass transfer in bijels will be investigated. To this end, a bijel mass transfer apparatus fabricated by 3d-printing of bijel fibers and soft photolithography will be introduced. In conjunction with the following objective, the analysis of convective flows in bijels will facilitate a thorough description of their structure/function relationships.
(c) Biphasic chemical reactions in STrIPS bijel cross-flow reactors. First, continuous extraction in bijels will be realized. Next, conditions to carry out continuously-operated, phase transfer catalysis of well-known model reactions in bijels will be determined. Both processes will be characterized in-situ and in 3-dimensions by confocal microscopy of fluorescent phase transfer reactions in transparent bijels.
Max ERC Funding
1 905 000 €
Duration
Start date: 2019-06-01, End date: 2024-05-31
Project acronym 3D-FM
Project Taking Force Microscopy into the Third Dimension
Researcher (PI) Tjerk Hendrik Oosterkamp
Host Institution (HI) UNIVERSITEIT LEIDEN
Call Details Starting Grant (StG), PE3, ERC-2007-StG
Summary I propose to pursue two emerging Force Microscopy techniques that allow measuring structural properties below the surface of the specimen. Whereas Force Microscopy (most commonly known under the name AFM) is usually limited to measuring the surface topography and surface properties of a specimen, I will demonstrate that Force Microscopy can achieve true 3D images of the structure of the cell nucleus. In Ultrasound Force Microscopy, an ultrasound wave is launched from below towards the surface of the specimen. After the sound waves interact with structures beneath the surface of the specimen, the local variations in the amplitude and phase shift of the ultrasonic surface motion is collected by the Force Microscopy tip. Previously, measured 2D maps of the surface response have shown that the surface response is sensitive to structures below the surface. In this project I will employ miniature AFM cantilevers and nanotube tips that I have already developed in my lab. This will allow me to quickly acquire many such 2D maps at a much wider range of ultrasound frequencies and from these 2D maps calculate the full 3D structure below the surface. I expect this technique to have a resolving power better than 10 nm in three dimensions as far as 2 microns below the surface. In parallel I will introduce a major improvement to a technique based on Nuclear Magnetic Resonance (NMR). Magnetic Resonance Force Microscopy measures the interaction of a rotating nuclear spin in the field gradient of a magnetic Force Microscopy tip. However, these forces are so small that they pose an enormous challenge. Miniature cantilevers and nanotube tips, in combination with additional innovations in the detection of the cantilever motion, can overcome this problem. I expect to be able to measure the combined signal of 100 proton spins or fewer, which will allow me to measure proton densities with a resolution of 5 nm, but possibly even with atomic resolution.
Summary
I propose to pursue two emerging Force Microscopy techniques that allow measuring structural properties below the surface of the specimen. Whereas Force Microscopy (most commonly known under the name AFM) is usually limited to measuring the surface topography and surface properties of a specimen, I will demonstrate that Force Microscopy can achieve true 3D images of the structure of the cell nucleus. In Ultrasound Force Microscopy, an ultrasound wave is launched from below towards the surface of the specimen. After the sound waves interact with structures beneath the surface of the specimen, the local variations in the amplitude and phase shift of the ultrasonic surface motion is collected by the Force Microscopy tip. Previously, measured 2D maps of the surface response have shown that the surface response is sensitive to structures below the surface. In this project I will employ miniature AFM cantilevers and nanotube tips that I have already developed in my lab. This will allow me to quickly acquire many such 2D maps at a much wider range of ultrasound frequencies and from these 2D maps calculate the full 3D structure below the surface. I expect this technique to have a resolving power better than 10 nm in three dimensions as far as 2 microns below the surface. In parallel I will introduce a major improvement to a technique based on Nuclear Magnetic Resonance (NMR). Magnetic Resonance Force Microscopy measures the interaction of a rotating nuclear spin in the field gradient of a magnetic Force Microscopy tip. However, these forces are so small that they pose an enormous challenge. Miniature cantilevers and nanotube tips, in combination with additional innovations in the detection of the cantilever motion, can overcome this problem. I expect to be able to measure the combined signal of 100 proton spins or fewer, which will allow me to measure proton densities with a resolution of 5 nm, but possibly even with atomic resolution.
Max ERC Funding
1 794 960 €
Duration
Start date: 2008-08-01, End date: 2013-07-31
Project acronym 3D-JOINT
Project 3D Bioprinting of JOINT Replacements
Researcher (PI) Johannes Jos Malda
Host Institution (HI) UNIVERSITAIR MEDISCH CENTRUM UTRECHT
Call Details Consolidator Grant (CoG), LS7, ERC-2014-CoG
Summary The world has a significant medical challenge in repairing injured or diseased joints. Joint degeneration and its related pain is a major socio-economic burden that will increase over the next decade and is currently addressed by implanting a metal prosthesis. For the long term, the ideal solution to joint injury is to successfully regenerate rather than replace the damaged cartilage with synthetic implants. Recent advances in key technologies are now bringing this “holy grail” within reach; regenerative approaches, based on cell therapy, are already clinically available albeit only for smaller focal cartilage defects.
One of these key technologies is three-dimensional (3D) bio-printing, which provides a greatly controlled placement and organization of living constructs through the layer-by-layer deposition of materials and cells. These tissue constructs can be applied as tissue models for research and screening. However, the lack of biomechanical properties of these tissue constructs has hampered their application to the regeneration of damaged, degenerated or diseased tissue.
Having established a cartilage-focussed research laboratory in the University Medical Center Utrecht, I have addressed this biomechanical limitation of hydrogels through the use of hydrogel composites. Specifically, I have pioneered a 3D bio-printing technology that combines accurately printed small diameter thermoplast filaments with cell invasive hydrogels to form strong fibre-reinforced constructs. This, in combination with bioreactor technology, is the key to the generation of larger, complex tissue constructs with cartilage-like biomechanical resilience. With 3D-JOINT I will use my in-depth bio-printing and bioreactor knowledge and experience to develop a multi-phasic 3D-printed biological replacement of the joint.
Summary
The world has a significant medical challenge in repairing injured or diseased joints. Joint degeneration and its related pain is a major socio-economic burden that will increase over the next decade and is currently addressed by implanting a metal prosthesis. For the long term, the ideal solution to joint injury is to successfully regenerate rather than replace the damaged cartilage with synthetic implants. Recent advances in key technologies are now bringing this “holy grail” within reach; regenerative approaches, based on cell therapy, are already clinically available albeit only for smaller focal cartilage defects.
One of these key technologies is three-dimensional (3D) bio-printing, which provides a greatly controlled placement and organization of living constructs through the layer-by-layer deposition of materials and cells. These tissue constructs can be applied as tissue models for research and screening. However, the lack of biomechanical properties of these tissue constructs has hampered their application to the regeneration of damaged, degenerated or diseased tissue.
Having established a cartilage-focussed research laboratory in the University Medical Center Utrecht, I have addressed this biomechanical limitation of hydrogels through the use of hydrogel composites. Specifically, I have pioneered a 3D bio-printing technology that combines accurately printed small diameter thermoplast filaments with cell invasive hydrogels to form strong fibre-reinforced constructs. This, in combination with bioreactor technology, is the key to the generation of larger, complex tissue constructs with cartilage-like biomechanical resilience. With 3D-JOINT I will use my in-depth bio-printing and bioreactor knowledge and experience to develop a multi-phasic 3D-printed biological replacement of the joint.
Max ERC Funding
1 998 871 €
Duration
Start date: 2015-07-01, End date: 2020-06-30
Project acronym 3MC
Project 3D Model Catalysts to explore new routes to sustainable fuels
Researcher (PI) Petra Elisabeth De jongh
Host Institution (HI) UNIVERSITEIT UTRECHT
Call Details Consolidator Grant (CoG), PE4, ERC-2014-CoG
Summary Currently fuels, plastics, and drugs are predominantly manufactured from oil. A transition towards renewable resources critically depends on new catalysts, for instance to convert small molecules (such as solar or biomass derived hydrogen, carbon monoxide, water and carbon dioxide) into more complex ones (such as oxygenates, containing oxygen atoms in their structure). Catalyst development now often depends on trial and error rather than rational design, as the heterogeneity of these composite systems hampers detailed understanding of the role of each of the components.
I propose 3D model catalysts as a novel enabling tool to overcome this problem. Their well-defined nature allows unprecedented precision in the variation of structural parameters (morphology, spatial distribution) of the individual components, while at the same time they mimic real catalysts closely enough to allow testing under industrially relevant conditions. Using this approach I will address fundamental questions, such as:
* What are the mechanisms (structural, electronic, chemical) by which non-metal promoters influence the functionality of copper-based catalysts?
* Which nanoalloys can be formed, how does their composition influence the surface active sites and catalytic functionality under reaction conditions?
* Which size and interface effects occur, and how can we use them to tune the actitivity and selectivity towards desired products?
Our 3D model catalysts will be assembled from ordered mesoporous silica and carbon support materials and Cu-based promoted and bimetallic nanoparticles. The combination with high resolution characterization and testing under realistic conditions allows detailed insight into the role of the different components; critical for the rational design of novel catalysts for a future more sustainable production of chemicals and fuels from renewable resources.
Summary
Currently fuels, plastics, and drugs are predominantly manufactured from oil. A transition towards renewable resources critically depends on new catalysts, for instance to convert small molecules (such as solar or biomass derived hydrogen, carbon monoxide, water and carbon dioxide) into more complex ones (such as oxygenates, containing oxygen atoms in their structure). Catalyst development now often depends on trial and error rather than rational design, as the heterogeneity of these composite systems hampers detailed understanding of the role of each of the components.
I propose 3D model catalysts as a novel enabling tool to overcome this problem. Their well-defined nature allows unprecedented precision in the variation of structural parameters (morphology, spatial distribution) of the individual components, while at the same time they mimic real catalysts closely enough to allow testing under industrially relevant conditions. Using this approach I will address fundamental questions, such as:
* What are the mechanisms (structural, electronic, chemical) by which non-metal promoters influence the functionality of copper-based catalysts?
* Which nanoalloys can be formed, how does their composition influence the surface active sites and catalytic functionality under reaction conditions?
* Which size and interface effects occur, and how can we use them to tune the actitivity and selectivity towards desired products?
Our 3D model catalysts will be assembled from ordered mesoporous silica and carbon support materials and Cu-based promoted and bimetallic nanoparticles. The combination with high resolution characterization and testing under realistic conditions allows detailed insight into the role of the different components; critical for the rational design of novel catalysts for a future more sustainable production of chemicals and fuels from renewable resources.
Max ERC Funding
1 999 625 €
Duration
Start date: 2015-09-01, End date: 2020-08-31
Project acronym 4C
Project 4C technology: uncovering the multi-dimensional structure of the genome
Researcher (PI) Wouter Leonard De Laat
Host Institution (HI) KONINKLIJKE NEDERLANDSE AKADEMIE VAN WETENSCHAPPEN - KNAW
Call Details Starting Grant (StG), LS2, ERC-2007-StG
Summary The architecture of DNA in the cell nucleus is an emerging epigenetic key contributor to genome function. We recently developed 4C technology, a high-throughput technique that combines state-of-the-art 3C technology with tailored micro-arrays to uniquely allow for an unbiased genome-wide search for DNA loci that interact in the nuclear space. Based on 4C technology, we were the first to provide a comprehensive overview of long-range DNA contacts of selected loci. The data showed that active and inactive chromatin domains contact many distinct regions within and between chromosomes and genes switch long-range DNA contacts in relation to their expression status. 4C technology not only allows investigating the three-dimensional structure of DNA in the nucleus, it also accurately reconstructs at least 10 megabases of the one-dimensional chromosome sequence map around the target sequence. Changes in this physical map as a result of genomic rearrangements are therefore identified by 4C technology. We recently demonstrated that 4C detects deletions, balanced inversions and translocations in patient samples at a resolution (~7kb) that allowed immediate sequencing of the breakpoints. Excitingly, 4C technology therefore offers the first high-resolution genomic approach that can identify both balanced and unbalanced genomic rearrangements. 4C is expected to become an important tool in clinical diagnosis and prognosis. Key objectives of this proposal are: 1. Explore the functional significance of DNA folding in the nucleus by systematically applying 4C technology to differentially expressed gene loci. 2. Adapt 4C technology such that it allows for massive parallel analysis of DNA interactions between regulatory elements and gene promoters. This method would greatly facilitate the identification of functionally relevant DNA elements in the genome. 3. Develop 4C technology into a clinical diagnostic tool for the accurate detection of balanced and unbalanced rearrangements.
Summary
The architecture of DNA in the cell nucleus is an emerging epigenetic key contributor to genome function. We recently developed 4C technology, a high-throughput technique that combines state-of-the-art 3C technology with tailored micro-arrays to uniquely allow for an unbiased genome-wide search for DNA loci that interact in the nuclear space. Based on 4C technology, we were the first to provide a comprehensive overview of long-range DNA contacts of selected loci. The data showed that active and inactive chromatin domains contact many distinct regions within and between chromosomes and genes switch long-range DNA contacts in relation to their expression status. 4C technology not only allows investigating the three-dimensional structure of DNA in the nucleus, it also accurately reconstructs at least 10 megabases of the one-dimensional chromosome sequence map around the target sequence. Changes in this physical map as a result of genomic rearrangements are therefore identified by 4C technology. We recently demonstrated that 4C detects deletions, balanced inversions and translocations in patient samples at a resolution (~7kb) that allowed immediate sequencing of the breakpoints. Excitingly, 4C technology therefore offers the first high-resolution genomic approach that can identify both balanced and unbalanced genomic rearrangements. 4C is expected to become an important tool in clinical diagnosis and prognosis. Key objectives of this proposal are: 1. Explore the functional significance of DNA folding in the nucleus by systematically applying 4C technology to differentially expressed gene loci. 2. Adapt 4C technology such that it allows for massive parallel analysis of DNA interactions between regulatory elements and gene promoters. This method would greatly facilitate the identification of functionally relevant DNA elements in the genome. 3. Develop 4C technology into a clinical diagnostic tool for the accurate detection of balanced and unbalanced rearrangements.
Max ERC Funding
1 225 000 €
Duration
Start date: 2008-09-01, End date: 2013-08-31
Project acronym 4D-EEG
Project 4D-EEG: A new tool to investigate the spatial and temporal activity patterns in the brain
Researcher (PI) Franciscus C.T. Van Der Helm
Host Institution (HI) TECHNISCHE UNIVERSITEIT DELFT
Call Details Advanced Grant (AdG), PE7, ERC-2011-ADG_20110209
Summary Our first goal is to develop a new tool to determine brain activity with a high temporal (< 1 msec) and spatial (about 2 mm) resolution with the focus on motor control. High density EEG (up to 256 electrodes) will be used for EEG source localization. Advanced force-controlled robot manipulators will be used to impose continuous force perturbations to the joints. Advanced closed-loop system identification algorithms will identify the dynamic EEG response of multiple brain areas to the perturbation, leading to a functional interpretation of EEG. The propagation of the signal in time and 3D space through the cortex can be monitored: 4D-EEG. Preliminary experiments with EEG localization have shown that the continuous force perturbations resulted in a better signal-to-noise ratio and coherence than the current method using transient perturbations..
4D-EEG will be a direct measure of the neural activity in the brain with an excellent temporal response and easy to use in combination with motor control tasks. The new 4D-EEG method is expected to provide a breakthrough in comparison to functional MRI (fMRI) when elucidating the meaning of cortical map plasticity in motor learning.
Our second goal is to generate and validate new hypotheses about the longitudinal relationship between motor learning and cortical map plasticity by clinically using 4D-EEG in an intensive, repeated measurement design in patients suffering from a stroke. The application of 4D-EEG combined with haptic robots will allow us to discover how dynamics in cortical map plasticity are related with upper limb recovery after stroke in terms of neural repair and using behavioral compensation strategies while performing a meaningful motor tasks.. The non-invasive 4D-EEG technique combined with haptic robots will open the window about what and how patients (re)learn when showing motor recovery after stroke in order to allow us to develop more effective patient-tailored therapies in neuro-rehabilitation.
Summary
Our first goal is to develop a new tool to determine brain activity with a high temporal (< 1 msec) and spatial (about 2 mm) resolution with the focus on motor control. High density EEG (up to 256 electrodes) will be used for EEG source localization. Advanced force-controlled robot manipulators will be used to impose continuous force perturbations to the joints. Advanced closed-loop system identification algorithms will identify the dynamic EEG response of multiple brain areas to the perturbation, leading to a functional interpretation of EEG. The propagation of the signal in time and 3D space through the cortex can be monitored: 4D-EEG. Preliminary experiments with EEG localization have shown that the continuous force perturbations resulted in a better signal-to-noise ratio and coherence than the current method using transient perturbations..
4D-EEG will be a direct measure of the neural activity in the brain with an excellent temporal response and easy to use in combination with motor control tasks. The new 4D-EEG method is expected to provide a breakthrough in comparison to functional MRI (fMRI) when elucidating the meaning of cortical map plasticity in motor learning.
Our second goal is to generate and validate new hypotheses about the longitudinal relationship between motor learning and cortical map plasticity by clinically using 4D-EEG in an intensive, repeated measurement design in patients suffering from a stroke. The application of 4D-EEG combined with haptic robots will allow us to discover how dynamics in cortical map plasticity are related with upper limb recovery after stroke in terms of neural repair and using behavioral compensation strategies while performing a meaningful motor tasks.. The non-invasive 4D-EEG technique combined with haptic robots will open the window about what and how patients (re)learn when showing motor recovery after stroke in order to allow us to develop more effective patient-tailored therapies in neuro-rehabilitation.
Max ERC Funding
3 477 202 €
Duration
Start date: 2012-06-01, End date: 2017-05-31
Project acronym AAATSI
Project Advanced Antenna Architecture for THZ Sensing Instruments
Researcher (PI) Andrea Neto
Host Institution (HI) TECHNISCHE UNIVERSITEIT DELFT
Call Details Starting Grant (StG), PE7, ERC-2011-StG_20101014
Summary The Tera-Hertz portion of the spectrum presents unique potentials for advanced applications. Currently the THz spectrum is revealing the mechanisms at the origin of our universe and provides the means to monitor the health of our planet via satellite based sensing of critical gases. Potentially time domain sensing of the THz spectrum will be the ideal tool for a vast variety of medical and security applications.
Presently, systems in the THz regime are extremely expensive and consequently the THz spectrum is still the domain of only niche (expensive) scientific applications. The main problems are the lack of power and sensitivity. The wide unused THz spectral bandwidth is, herself, the only widely available resource that in the future can compensate for these problems. But, so far, when scientists try to really use the bandwidth, they run into an insurmountable physical limit: antenna dispersion. Antenna dispersion modifies the signal’s spectrum in a wavelength dependent manner in all types of radiation, but is particularly deleterious to THz signals because the spectrum is too wide and with foreseeable technology it cannot be digitized.
The goal of this proposal is to introduce break-through antenna technology that will eliminate the dispersion bottle neck and revolutionize Time Domain sensing and Spectroscopic Space Science. Achieving these goals the project will pole vault THz imaging technology into the 21-th century and develop critically important enabling technologies which will satisfy the electrical engineering needs of the next 30 years and in the long run will enable multi Tera-bit wireless communications.
In order to achieve these goals, I will first build upon two major breakthrough radiation mechanisms that I pioneered: Leaky Lenses and Connected Arrays. Eventually, ultra wide band imaging arrays constituted by thousands of components will be designed on the bases of the new theoretical findings and demonstrated.
Summary
The Tera-Hertz portion of the spectrum presents unique potentials for advanced applications. Currently the THz spectrum is revealing the mechanisms at the origin of our universe and provides the means to monitor the health of our planet via satellite based sensing of critical gases. Potentially time domain sensing of the THz spectrum will be the ideal tool for a vast variety of medical and security applications.
Presently, systems in the THz regime are extremely expensive and consequently the THz spectrum is still the domain of only niche (expensive) scientific applications. The main problems are the lack of power and sensitivity. The wide unused THz spectral bandwidth is, herself, the only widely available resource that in the future can compensate for these problems. But, so far, when scientists try to really use the bandwidth, they run into an insurmountable physical limit: antenna dispersion. Antenna dispersion modifies the signal’s spectrum in a wavelength dependent manner in all types of radiation, but is particularly deleterious to THz signals because the spectrum is too wide and with foreseeable technology it cannot be digitized.
The goal of this proposal is to introduce break-through antenna technology that will eliminate the dispersion bottle neck and revolutionize Time Domain sensing and Spectroscopic Space Science. Achieving these goals the project will pole vault THz imaging technology into the 21-th century and develop critically important enabling technologies which will satisfy the electrical engineering needs of the next 30 years and in the long run will enable multi Tera-bit wireless communications.
In order to achieve these goals, I will first build upon two major breakthrough radiation mechanisms that I pioneered: Leaky Lenses and Connected Arrays. Eventually, ultra wide band imaging arrays constituted by thousands of components will be designed on the bases of the new theoretical findings and demonstrated.
Max ERC Funding
1 499 487 €
Duration
Start date: 2011-11-01, End date: 2017-10-31
Project acronym AARTFAAC
Project Amsterdam-ASTRON Radio Transient Facility And Analysis Centre: Probing the Extremes of Astrophysics
Researcher (PI) Ralph Antoine Marie Joseph Wijers
Host Institution (HI) UNIVERSITEIT VAN AMSTERDAM
Call Details Advanced Grant (AdG), PE9, ERC-2009-AdG
Summary Some of the most extreme tests of physical law come from its manifestations in the behaviour of black holes and neutron stars, and as such these objects should be used as fundamental physics labs. Due to advances in both theoretical work and observational techniques, I have a major opportunity now to significantly push this agenda forward and get better answers to questions like: How are black holes born? How can energy be extracted from black holes? What is the origin of magnetic fields and cosmic rays in jets and shocks? Is their primary energy stream hadronic or magnetic? I propose to do this by exploiting the advent of wide-field radio astronomy: extreme objects are very rare and usually transient, so not only must one survey large areas of sky, but also must one do this often. I propose to form and shape a group that will use the LOFAR wide-field radio telescope to hunt for these extreme transients and systematically collect enough well-documented examples of the behaviour of each type of transient. Furthermore, I propose to expand LOFAR with a true 24/7 all-sky monitor to catch and study even the rarest of events. Next, I will use my experience in gamma-ray burst followup to conduct a vigorous multi-wavelength programme of study of these objects, to constrain their physics from as many angles as possible. This will eventually include results from multi-messenger astrophysics, in which we use neutrinos, gravity waves, and other non-electromagnetic messengers as extra diagnostics of the physics of these sources. Finally, I will build on my experience in modelling accretion phenomena and relativistic explosions to develop a theoretical framework for these phenomena and constrain the resulting models with the rich data sets we obtain.
Summary
Some of the most extreme tests of physical law come from its manifestations in the behaviour of black holes and neutron stars, and as such these objects should be used as fundamental physics labs. Due to advances in both theoretical work and observational techniques, I have a major opportunity now to significantly push this agenda forward and get better answers to questions like: How are black holes born? How can energy be extracted from black holes? What is the origin of magnetic fields and cosmic rays in jets and shocks? Is their primary energy stream hadronic or magnetic? I propose to do this by exploiting the advent of wide-field radio astronomy: extreme objects are very rare and usually transient, so not only must one survey large areas of sky, but also must one do this often. I propose to form and shape a group that will use the LOFAR wide-field radio telescope to hunt for these extreme transients and systematically collect enough well-documented examples of the behaviour of each type of transient. Furthermore, I propose to expand LOFAR with a true 24/7 all-sky monitor to catch and study even the rarest of events. Next, I will use my experience in gamma-ray burst followup to conduct a vigorous multi-wavelength programme of study of these objects, to constrain their physics from as many angles as possible. This will eventually include results from multi-messenger astrophysics, in which we use neutrinos, gravity waves, and other non-electromagnetic messengers as extra diagnostics of the physics of these sources. Finally, I will build on my experience in modelling accretion phenomena and relativistic explosions to develop a theoretical framework for these phenomena and constrain the resulting models with the rich data sets we obtain.
Max ERC Funding
3 499 128 €
Duration
Start date: 2010-10-01, End date: 2016-09-30
Project acronym ABCTRANSPORT
Project Minimalist multipurpose ATP-binding cassette transporters
Researcher (PI) Dirk Jan Slotboom
Host Institution (HI) RIJKSUNIVERSITEIT GRONINGEN
Call Details Starting Grant (StG), LS1, ERC-2011-StG_20101109
Summary Many Gram-positive (pathogenic) bacteria are dependent on the uptake of vitamins from the environment or from the infected host. We have recently discovered the long-elusive family of membrane protein complexes catalyzing such transport. The vitamin transporters have an unprecedented modular architecture consisting of a single multipurpose energizing module (the Energy Coupling Factor, ECF) and multiple exchangeable membrane proteins responsible for substrate recognition (S-components). The S-components have characteristics of ion-gradient driven transporters (secondary active transporters), whereas the energizing modules are related to ATP-binding cassette (ABC) transporters (primary active transporters).
The aim of the proposal is threefold: First, we will address the question how properties of primary and secondary transporters are combined in ECF transporters to obtain a novel transport mechanism. Second, we will study the fundamental and unresolved question how protein-protein recognition takes place in the hydrophobic environment of the lipid bilayer. The modular nature of the ECF proteins offers a natural system to study the driving forces used for membrane protein interaction. Third, we will assess whether the ECF transport systems could become targets for antibacterial drugs. ECF transporters are found exclusively in prokaryotes, and their activity is often essential for viability of Gram-positive pathogens. Thus they could turn out to be an Achilles’ heel for the organisms.
Structural and mechanistic studies (X-ray crystallography, microscopy, spectroscopy and biochemistry) will reveal how the different transport modes are combined in a single protein complex, how transport is energized and catalyzed, and how protein-protein recognition takes place. Microbiological screens will be developed to search for compounds that inhibit prokaryote-specific steps of the mechanism of ECF transporters.
Summary
Many Gram-positive (pathogenic) bacteria are dependent on the uptake of vitamins from the environment or from the infected host. We have recently discovered the long-elusive family of membrane protein complexes catalyzing such transport. The vitamin transporters have an unprecedented modular architecture consisting of a single multipurpose energizing module (the Energy Coupling Factor, ECF) and multiple exchangeable membrane proteins responsible for substrate recognition (S-components). The S-components have characteristics of ion-gradient driven transporters (secondary active transporters), whereas the energizing modules are related to ATP-binding cassette (ABC) transporters (primary active transporters).
The aim of the proposal is threefold: First, we will address the question how properties of primary and secondary transporters are combined in ECF transporters to obtain a novel transport mechanism. Second, we will study the fundamental and unresolved question how protein-protein recognition takes place in the hydrophobic environment of the lipid bilayer. The modular nature of the ECF proteins offers a natural system to study the driving forces used for membrane protein interaction. Third, we will assess whether the ECF transport systems could become targets for antibacterial drugs. ECF transporters are found exclusively in prokaryotes, and their activity is often essential for viability of Gram-positive pathogens. Thus they could turn out to be an Achilles’ heel for the organisms.
Structural and mechanistic studies (X-ray crystallography, microscopy, spectroscopy and biochemistry) will reveal how the different transport modes are combined in a single protein complex, how transport is energized and catalyzed, and how protein-protein recognition takes place. Microbiological screens will be developed to search for compounds that inhibit prokaryote-specific steps of the mechanism of ECF transporters.
Max ERC Funding
1 500 000 €
Duration
Start date: 2012-01-01, End date: 2017-12-31
Project acronym ABCvolume
Project The ABC of Cell Volume Regulation
Researcher (PI) Berend Poolman
Host Institution (HI) RIJKSUNIVERSITEIT GRONINGEN
Call Details Advanced Grant (AdG), LS1, ERC-2014-ADG
Summary Cell volume regulation is crucial for any living cell because changes in volume determine the metabolic activity through e.g. changes in ionic strength, pH, macromolecular crowding and membrane tension. These physical chemical parameters influence interaction rates and affinities of biomolecules, folding rates, and fold stabilities in vivo. Understanding of the underlying volume regulatory mechanisms has immediate application in biotechnology and health, yet these factors are generally ignored in systems analyses of cellular functions.
My team has uncovered a number of mechanisms and insights of cell volume regulation. The next step forward is to elucidate how the components of a cell volume regulatory circuit work together and control the physicochemical conditions of the cell.
I propose construction of a synthetic cell in which an osmoregulatory transporter and mechanosensitive channel form a minimal volume regulatory network. My group has developed the technology to reconstitute membrane proteins into lipid vesicles (synthetic cells). One of the challenges is to incorporate into the vesicles an efficient pathway for ATP production and maintain energy homeostasis while the load on the system varies. We aim to control the transmembrane flux of osmolytes, which requires elucidation of the molecular mechanism of gating of the osmoregulatory transporter. We will focus on the glycine betaine ABC importer, which is one of the most complex transporters known to date with ten distinct protein domains, transiently interacting with each other.
The proposed synthetic metabolic circuit constitutes a fascinating out-of-equilibrium system, allowing us to understand cell volume regulatory mechanisms in a context and at a level of complexity minimally needed for life. Analysis of this circuit will address many outstanding questions and eventually allow us to design more sophisticated vesicular systems with applications, for example as compartmentalized reaction networks.
Summary
Cell volume regulation is crucial for any living cell because changes in volume determine the metabolic activity through e.g. changes in ionic strength, pH, macromolecular crowding and membrane tension. These physical chemical parameters influence interaction rates and affinities of biomolecules, folding rates, and fold stabilities in vivo. Understanding of the underlying volume regulatory mechanisms has immediate application in biotechnology and health, yet these factors are generally ignored in systems analyses of cellular functions.
My team has uncovered a number of mechanisms and insights of cell volume regulation. The next step forward is to elucidate how the components of a cell volume regulatory circuit work together and control the physicochemical conditions of the cell.
I propose construction of a synthetic cell in which an osmoregulatory transporter and mechanosensitive channel form a minimal volume regulatory network. My group has developed the technology to reconstitute membrane proteins into lipid vesicles (synthetic cells). One of the challenges is to incorporate into the vesicles an efficient pathway for ATP production and maintain energy homeostasis while the load on the system varies. We aim to control the transmembrane flux of osmolytes, which requires elucidation of the molecular mechanism of gating of the osmoregulatory transporter. We will focus on the glycine betaine ABC importer, which is one of the most complex transporters known to date with ten distinct protein domains, transiently interacting with each other.
The proposed synthetic metabolic circuit constitutes a fascinating out-of-equilibrium system, allowing us to understand cell volume regulatory mechanisms in a context and at a level of complexity minimally needed for life. Analysis of this circuit will address many outstanding questions and eventually allow us to design more sophisticated vesicular systems with applications, for example as compartmentalized reaction networks.
Max ERC Funding
2 247 231 €
Duration
Start date: 2015-07-01, End date: 2020-06-30
