ERC FUNDED PROJECTS

The realization of “the internet of things” is inevitably constrained at the level of miniaturization that can be achieved in the electronic devices. A variety of technologies are now going through a process of miniaturization from micro-electromechanical systems (MEMS) to biomedical sensors, and actuators. The ultimate goal is to combine several components in an individual multifunctional platform, realizing on-chip technology. Devices have to be constrained to small footprints and exhibit high performance. Thus, the miniaturization process requires the introduction of new manufacturing processes to fabricate devices in the 3D space over small areas. 3D printing via robocasting is emerging as a new manufacturing technique, which allows shaping virtually any materials from polymers to ceramic and metals into complex architectures. The goal of this research is to establish a 3D printing paradigm to produce miniaturized complex shape devices with diversified functions for on-chip technologies adaptable to “smart environment” such as flexible substrates, smart textiles and biomedical sensors. The elementary building blocks of the devices will be two-dimensional nanomaterials, which present unique optical, electrical, chemical and mechanical properties. The synergistic combination of the intrinsic characteristics of the 2D nanomaterials and the specific 3D architecture will enable advanced performance of the 3D printed objects. This research programme will demonstrate 3D miniaturized energy storage and energy conversion units fabricated with inks produced using a pilot plant. These units are essential components of any on-chip platform as they ensure energy autonomy via self-powering. Ultimately, this research will initiate new technologies based on miniaturized 3D devices.

1 999 968 €

Start date: 2019-09-01, End date: 2024-08-31

Nanowires based on group III–nitride semiconductors exhibit outstanding potential for emerging applications in energy-efficient lighting, optoelectronics and solar energy harvesting. Nitride nanowires, tailored at the nanoscale, should overcome many of the challenges facing conventional planar nitride materials, and also add extraordinary new functionality to these materials. However, progress towards III–nitride nanowire devices has been hampered by the challenges in quantifying nanowire electrical properties using conventional contact-based measurements. Without reliable electrical transport data, it is extremely difficult to optimise nanowire growth and device design. This project aims to overcome this problem through an unconventional approach: advanced contact-free electrical measurements. Contact-free measurements, growth studies, and device studies will be cross-correlated to provide unprecedented insight into the growth mechanisms that govern nanowire electronic properties and ultimately dictate device performance. A key contact-free technique at the heart of this proposal is ultrafast terahertz conductivity spectroscopy: an advanced technique ideal for probing nanowire electrical properties. We will develop new methods to enable the full suite of contact-free (including terahertz, photoluminescence and cathodoluminescence measurements) and contact-based measurements to be performed with high spatial resolution on the same nanowires. This will provide accurate, comprehensive and cross-correlated feedback to guide growth studies and expedite the targeted development of nanowires with specified functionality. We will apply this powerful approach to tailor nanowires as photoelectrodes for solar photoelectrochemical water splitting. This is an application for which nitride nanowires have outstanding, yet unfulfilled, potential. This project will thus harness the true potential of nitride nanowires and bring them to the forefront of 21st century technology.

1 499 195 €

Start date: 2017-04-01, End date: 2022-03-31

Recent technological advances in optical microscopy have vastly broadened the possibilities for applications in the biomedical sciences. Fluorescence microscopy is the central tool for investigation of molecular structures and dynamics that take place in the cellular and tissue environment. Coupled with progress in labeling methods, these microscopes permit observation of biological structures and processes with unprecedented sensitivity and resolution. This work has been enabled by the engineering development of diverse optical systems that provide different capabilities for the imaging toolkit. All such methods rely upon high fidelity optics to provide optimal resolution and efficiency, but they all suffer from aberrations caused by refractive index variations within the specimen. It is widely accepted that in many applications this fundamental problem prevents optimum operation and limits capability. Adaptive optics (AO) has been introduced to overcome these limitations by correcting aberrations and a range of demonstrations has shown clearly its potential. Indeed, it shows great promise to improve virtually all types of research or commercial microscopes, but significant challenges must still be met before AO can be widely implemented in routine imaging. Current advances are being made through development of bespoke AO solutions to individual imaging tasks. However, the diversity of microscopy methods means that individual solutions are often not translatable to other systems. This proposal is directed towards the creation of theoretical and practical frameworks that tie together AO concepts and provide a suite of scientific tools with broad application. This will be achieved through a systems approach that encompasses theoretical modelling, optical engineering and the requirements of biological applications. Additional outputs will include practical designs, operating protocols and software algorithms that will support next generation AO microscope systems.

3 234 789 €

Start date: 2016-09-01, End date: 2021-08-31

Gas turbines are an essential ingredient in the long-term energy and aviation mix. They are flexible, offer fast start-up and the ability to burn renewable-generated fuels. However, they generate NOx emissions, which cause air pollution and damage human health, and reducing these is an air quality imperative. A major hurdle to this is that lean premixed combustion, essential for further NOx emission reductions, is highly susceptible to thermoacoustic instability. This is caused by a two-way coupling between unsteady combustion and acoustic waves, and the resulting large pressure oscillations can cause severe mechanical damage. Computational methods for predicting thermoacoustic instability, fast and accurate enough to be used as part of the industrial design process, are urgently needed. The only computational methods with the prospect of being fast enough are those based on coupled treatment of the acoustic waves and unsteady combustion. These exploit the amenity of the acoustic waves to analytical modelling, allowing costly simulations to be directed only at the more complex flame. They show real promise: my group recently demonstrated the first accurate coupled predictions for lab-scale combustors. The method does not yet extend to industrial combustors, the more complex flow-fields in these rendering current acoustic models overly-simplistic. I propose to comprehensively overhaul acoustic models across the entirety of the combustor, accounting for real and important acoustic-flow interactions. These new models will offer the breakthrough prospect of extending efficient, accurate predictive capability to industrial combustors, which has a real chance of facilitating future, instability free, very low NOx gas turbines.

1 985 288 €

Start date: 2018-06-01, End date: 2023-05-31