Project acronym 15CBOOKTRADE
Project The 15th-century Book Trade: An Evidence-based Assessment and Visualization of the Distribution, Sale, and Reception of Books in the Renaissance
Researcher (PI) Cristina Dondi
Host Institution (HI) THE CHANCELLOR, MASTERS AND SCHOLARS OF THE UNIVERSITY OF OXFORD
Country United Kingdom
Call Details Consolidator Grant (CoG), SH6, ERC-2013-CoG
Summary The idea that underpins this project is to use the material evidence from thousands of surviving 15th-c. books, as well as unique documentary evidence — the unpublished ledger of a Venetian bookseller in the 1480s which records the sale of 25,000 printed books with their prices — to address four fundamental questions relating to the introduction of printing in the West which have so far eluded scholarship, partly because of lack of evidence, partly because of the lack of effective tools to deal with existing evidence. The book trade differs from other trades operating in the medieval and early modern periods in that the goods traded survive in considerable numbers. Not only do they survive, but many of them bear stratified evidence of their history in the form of marks of ownership, prices, manuscript annotations, binding and decoration styles. A British Academy pilot project conceived by the PI produced a now internationally-used database which gathers together this kind of evidence for thousands of surviving 15th-c. printed books. For the first time, this makes it possible to track the circulation of books, their trade routes and later collecting, across Europe and the USA, and throughout the centuries. The objectives of this project are to examine (1) the distribution and trade-routes, national and international, of 15th-c. printed books, along with the identity of the buyers and users (private, institutional, religious, lay, female, male, and by profession) and their reading practices; (2) the books' contemporary market value; (3) the transmission and dissemination of the texts they contain, their survival and their loss (rebalancing potentially skewed scholarship); and (4) the circulation and re-use of the illustrations they contain. Finally, the project will experiment with the application of scientific visualization techniques to represent, geographically and chronologically, the movement of 15th-c. printed books and of the texts they contain.
Summary
The idea that underpins this project is to use the material evidence from thousands of surviving 15th-c. books, as well as unique documentary evidence — the unpublished ledger of a Venetian bookseller in the 1480s which records the sale of 25,000 printed books with their prices — to address four fundamental questions relating to the introduction of printing in the West which have so far eluded scholarship, partly because of lack of evidence, partly because of the lack of effective tools to deal with existing evidence. The book trade differs from other trades operating in the medieval and early modern periods in that the goods traded survive in considerable numbers. Not only do they survive, but many of them bear stratified evidence of their history in the form of marks of ownership, prices, manuscript annotations, binding and decoration styles. A British Academy pilot project conceived by the PI produced a now internationally-used database which gathers together this kind of evidence for thousands of surviving 15th-c. printed books. For the first time, this makes it possible to track the circulation of books, their trade routes and later collecting, across Europe and the USA, and throughout the centuries. The objectives of this project are to examine (1) the distribution and trade-routes, national and international, of 15th-c. printed books, along with the identity of the buyers and users (private, institutional, religious, lay, female, male, and by profession) and their reading practices; (2) the books' contemporary market value; (3) the transmission and dissemination of the texts they contain, their survival and their loss (rebalancing potentially skewed scholarship); and (4) the circulation and re-use of the illustrations they contain. Finally, the project will experiment with the application of scientific visualization techniques to represent, geographically and chronologically, the movement of 15th-c. printed books and of the texts they contain.
Max ERC Funding
1 999 172 €
Duration
Start date: 2014-04-01, End date: 2019-03-31
Project acronym 3D2DPrint
Project 3D Printing of Novel 2D Nanomaterials: Adding Advanced 2D Functionalities to Revolutionary Tailored 3D Manufacturing
Researcher (PI) Valeria Nicolosi
Host Institution (HI) THE PROVOST, FELLOWS, FOUNDATION SCHOLARS & THE OTHER MEMBERS OF BOARD OF THE COLLEGE OF THE HOLY & UNDIVIDED TRINITY OF QUEEN ELIZABETH NEAR DUBLIN
Country Ireland
Call Details Consolidator Grant (CoG), PE8, ERC-2015-CoG
Summary My vision is to establish, within the framework of an ERC CoG, a multidisciplinary group which will work in concert towards pioneering the integration of novel 2-Dimensional nanomaterials with novel additive fabrication techniques to develop a unique class of energy storage devices.
Batteries and supercapacitors are two very complementary types of energy storage devices. Batteries store much higher energy densities; supercapacitors, on the other hand, hold one tenth of the electricity per unit of volume or weight as compared to batteries but can achieve much higher power densities. Technology is currently striving to improve the power density of batteries and the energy density of supercapacitors. To do so it is imperative to develop new materials, chemistries and manufacturing strategies.
3D2DPrint aims to develop micro-energy devices (both supercapacitors and batteries), technologies particularly relevant in the context of the emergent industry of micro-electro-mechanical systems and constantly downsized electronics. We plan to use novel two-dimensional (2D) nanomaterials obtained by liquid-phase exfoliation. This method offers a new, economic and easy way to prepare ink of a variety of 2D systems, allowing to produce wide device performance window through elegant and simple constituent control at the point of fabrication. 3D2DPrint will use our expertise and know-how to allow development of advanced AM methods to integrate dissimilar nanomaterial blends and/or “hybrids” into fully embedded 3D printed energy storage devices, with the ultimate objective to realise a range of products that contain the above described nanomaterials subcomponent devices, electrical connections and traditional micro-fabricated subcomponents (if needed) ideally using a single tool.
Summary
My vision is to establish, within the framework of an ERC CoG, a multidisciplinary group which will work in concert towards pioneering the integration of novel 2-Dimensional nanomaterials with novel additive fabrication techniques to develop a unique class of energy storage devices.
Batteries and supercapacitors are two very complementary types of energy storage devices. Batteries store much higher energy densities; supercapacitors, on the other hand, hold one tenth of the electricity per unit of volume or weight as compared to batteries but can achieve much higher power densities. Technology is currently striving to improve the power density of batteries and the energy density of supercapacitors. To do so it is imperative to develop new materials, chemistries and manufacturing strategies.
3D2DPrint aims to develop micro-energy devices (both supercapacitors and batteries), technologies particularly relevant in the context of the emergent industry of micro-electro-mechanical systems and constantly downsized electronics. We plan to use novel two-dimensional (2D) nanomaterials obtained by liquid-phase exfoliation. This method offers a new, economic and easy way to prepare ink of a variety of 2D systems, allowing to produce wide device performance window through elegant and simple constituent control at the point of fabrication. 3D2DPrint will use our expertise and know-how to allow development of advanced AM methods to integrate dissimilar nanomaterial blends and/or “hybrids” into fully embedded 3D printed energy storage devices, with the ultimate objective to realise a range of products that contain the above described nanomaterials subcomponent devices, electrical connections and traditional micro-fabricated subcomponents (if needed) ideally using a single tool.
Max ERC Funding
2 499 942 €
Duration
Start date: 2016-10-01, End date: 2021-09-30
Project acronym 3DAddChip
Project Additive manufacturing of 2D nanomaterials for on-chip technologies
Researcher (PI) Cecilia Mattevi
Host Institution (HI) IMPERIAL COLLEGE OF SCIENCE TECHNOLOGY AND MEDICINE
Country United Kingdom
Call Details Consolidator Grant (CoG), PE8, ERC-2018-COG
Summary The realization of “the internet of things” is inevitably constrained at the level of miniaturization that can be achieved in the electronic devices. A variety of technologies are now going through a process of miniaturization from micro-electromechanical systems (MEMS) to biomedical sensors, and actuators. The ultimate goal is to combine several components in an individual multifunctional platform, realizing on-chip technology. Devices have to be constrained to small footprints and exhibit high performance. Thus, the miniaturization process requires the introduction of new manufacturing processes to fabricate devices in the 3D space over small areas. 3D printing via robocasting is emerging as a new manufacturing technique, which allows shaping virtually any materials from polymers to ceramic and metals into complex architectures.
The goal of this research is to establish a 3D printing paradigm to produce miniaturized complex shape devices with diversified functions for on-chip technologies adaptable to “smart environment” such as flexible substrates, smart textiles and biomedical sensors. The elementary building blocks of the devices will be two-dimensional nanomaterials, which present unique optical, electrical, chemical and mechanical properties. The synergistic combination of the intrinsic characteristics of the 2D nanomaterials and the specific 3D architecture will enable advanced performance of the 3D printed objects. This research programme will demonstrate 3D miniaturized energy storage and energy conversion units fabricated with inks produced using a pilot plant. These units are essential components of any on-chip platform as they ensure energy autonomy via self-powering. Ultimately, this research will initiate new technologies based on miniaturized 3D devices.
Summary
The realization of “the internet of things” is inevitably constrained at the level of miniaturization that can be achieved in the electronic devices. A variety of technologies are now going through a process of miniaturization from micro-electromechanical systems (MEMS) to biomedical sensors, and actuators. The ultimate goal is to combine several components in an individual multifunctional platform, realizing on-chip technology. Devices have to be constrained to small footprints and exhibit high performance. Thus, the miniaturization process requires the introduction of new manufacturing processes to fabricate devices in the 3D space over small areas. 3D printing via robocasting is emerging as a new manufacturing technique, which allows shaping virtually any materials from polymers to ceramic and metals into complex architectures.
The goal of this research is to establish a 3D printing paradigm to produce miniaturized complex shape devices with diversified functions for on-chip technologies adaptable to “smart environment” such as flexible substrates, smart textiles and biomedical sensors. The elementary building blocks of the devices will be two-dimensional nanomaterials, which present unique optical, electrical, chemical and mechanical properties. The synergistic combination of the intrinsic characteristics of the 2D nanomaterials and the specific 3D architecture will enable advanced performance of the 3D printed objects. This research programme will demonstrate 3D miniaturized energy storage and energy conversion units fabricated with inks produced using a pilot plant. These units are essential components of any on-chip platform as they ensure energy autonomy via self-powering. Ultimately, this research will initiate new technologies based on miniaturized 3D devices.
Max ERC Funding
1 999 968 €
Duration
Start date: 2019-09-01, End date: 2024-08-31
Project acronym ACHIEVE
Project Advanced Cellular Hierarchical Tissue-Imitations based on Excluded Volume Effect
Researcher (PI) Dimitrios ZEVGOLIS
Host Institution (HI) NATIONAL UNIVERSITY OF IRELAND GALWAY
Country Ireland
Call Details Consolidator Grant (CoG), PE8, ERC-2019-COG
Summary ACHIEVE focuses on the application of Excluded Volume Effect in cell culture systems in order to enhance Extracellular Matrix (ECM) deposition. It represents a new horizon in in vitro cell culture which will address major challenges in medical advancement and food security. ACHIEVE will elucidate extracellular processes which occur during tissue generation, identifying favourable conditions for optimum tissue cultivation in vitro. These results will be applied in the diverse fields of regenerative medicine, drug discovery and cellular agriculture which all require advancements in in vitro tissue engineering to overcome current bottlenecks. Effective in vitro tissue culture is currently limited by lengthy culture periods. An inability to maintain physiologic (in vivo) conditions during this lengthy in vitro culture leads to cellular phenotype drift, ultimately resulting in generation of an undesired tissue. Enhanced tissue generation in vitro will greatly reduce culture times and costs, effecting improved in vitro tissue substitutes which remain true to their original phenotype. The research will be addressed under four work-packages. WP1 will investigate biochemical, biophysical and biological responses to varying culture conditions; WP 2, 3 and 4 will apply results in the fields of Tissue Engineering, Drug Discovery and Cellular Agriculture respectively. Research will involve extensive characterisation of derived- and stem-cell cultures in varying conditions of expansion and relevant health and safety and preclinical testing. The five year programme will be undertaken at the National University of Ireland, Galway, a centre of excellence in tissue engineering research, at a cost of € 2,439,270.
Summary
ACHIEVE focuses on the application of Excluded Volume Effect in cell culture systems in order to enhance Extracellular Matrix (ECM) deposition. It represents a new horizon in in vitro cell culture which will address major challenges in medical advancement and food security. ACHIEVE will elucidate extracellular processes which occur during tissue generation, identifying favourable conditions for optimum tissue cultivation in vitro. These results will be applied in the diverse fields of regenerative medicine, drug discovery and cellular agriculture which all require advancements in in vitro tissue engineering to overcome current bottlenecks. Effective in vitro tissue culture is currently limited by lengthy culture periods. An inability to maintain physiologic (in vivo) conditions during this lengthy in vitro culture leads to cellular phenotype drift, ultimately resulting in generation of an undesired tissue. Enhanced tissue generation in vitro will greatly reduce culture times and costs, effecting improved in vitro tissue substitutes which remain true to their original phenotype. The research will be addressed under four work-packages. WP1 will investigate biochemical, biophysical and biological responses to varying culture conditions; WP 2, 3 and 4 will apply results in the fields of Tissue Engineering, Drug Discovery and Cellular Agriculture respectively. Research will involve extensive characterisation of derived- and stem-cell cultures in varying conditions of expansion and relevant health and safety and preclinical testing. The five year programme will be undertaken at the National University of Ireland, Galway, a centre of excellence in tissue engineering research, at a cost of € 2,439,270.
Max ERC Funding
2 076 770 €
Duration
Start date: 2020-09-01, End date: 2025-08-31
Project acronym ADaPt
Project Adaptation, Dispersals and Phenotype: understanding the roles of climate,
natural selection and energetics in shaping global hunter-gatherer adaptability
Researcher (PI) Jay Stock
Host Institution (HI) THE CHANCELLOR MASTERS AND SCHOLARS OF THE UNIVERSITY OF CAMBRIDGE
Country United Kingdom
Call Details Consolidator Grant (CoG), SH6, ERC-2013-CoG
Summary Relative to other species, humans are characterised by considerable biological diversity despite genetic homogeneity. This diversity is reflected in skeletal variation, but we lack sufficient understanding of the underlying mechanisms to adequately interpret the archaeological record. The proposed research will address problems in our current understanding of the origins of human variation in the past by: 1) documenting and interpreting the pattern of global hunter-gatherer variation relative to genetic phylogenies and climatic variation; 2) testing the relationship between environmental and skeletal variation among genetically related hunter-gatherers from different environments; 3) examining the adaptability of living humans to different environments, through the study of energetic expenditure and life history trade-offs associated with locomotion; and 4) investigating the relationship between muscle and skeletal variation associated with locomotion in diverse environments. This will be achieved by linking: a) detailed study of the global pattern of hunter-gatherer variation in the Late Pleistocene and Holocene with; b) ground-breaking experimental research which tests the relationship between energetic stress, muscle function, and bone variation in living humans. The first component tests the correspondence between skeletal variation and both genetic and climatic history, to infer mechanisms driving variation. The second component integrates this skeletal variation with experimental studies of living humans to, for the first time, directly test adaptive implications of skeletal variation observed in the past. ADaPt will provide the first links between prehistoric hunter-gatherer variation and the evolutionary parameters of life history and energetics that may have shaped our success as a species. It will lead to breakthroughs necessary to interpret variation in the archaeological record, relative to human dispersals and adaptation in the past.
Summary
Relative to other species, humans are characterised by considerable biological diversity despite genetic homogeneity. This diversity is reflected in skeletal variation, but we lack sufficient understanding of the underlying mechanisms to adequately interpret the archaeological record. The proposed research will address problems in our current understanding of the origins of human variation in the past by: 1) documenting and interpreting the pattern of global hunter-gatherer variation relative to genetic phylogenies and climatic variation; 2) testing the relationship between environmental and skeletal variation among genetically related hunter-gatherers from different environments; 3) examining the adaptability of living humans to different environments, through the study of energetic expenditure and life history trade-offs associated with locomotion; and 4) investigating the relationship between muscle and skeletal variation associated with locomotion in diverse environments. This will be achieved by linking: a) detailed study of the global pattern of hunter-gatherer variation in the Late Pleistocene and Holocene with; b) ground-breaking experimental research which tests the relationship between energetic stress, muscle function, and bone variation in living humans. The first component tests the correspondence between skeletal variation and both genetic and climatic history, to infer mechanisms driving variation. The second component integrates this skeletal variation with experimental studies of living humans to, for the first time, directly test adaptive implications of skeletal variation observed in the past. ADaPt will provide the first links between prehistoric hunter-gatherer variation and the evolutionary parameters of life history and energetics that may have shaped our success as a species. It will lead to breakthroughs necessary to interpret variation in the archaeological record, relative to human dispersals and adaptation in the past.
Max ERC Funding
1 911 485 €
Duration
Start date: 2014-07-01, End date: 2019-06-30
Project acronym AFIRMATIVE
Project Acoustic-Flow Interaction Models for Advancing Thermoacoustic Instability prediction in Very low Emission combustors
Researcher (PI) Aimee MORGANS
Host Institution (HI) IMPERIAL COLLEGE OF SCIENCE TECHNOLOGY AND MEDICINE
Country United Kingdom
Call Details Consolidator Grant (CoG), PE8, ERC-2017-COG
Summary Gas turbines are an essential ingredient in the long-term energy and aviation mix. They are flexible, offer fast start-up and the ability to burn renewable-generated fuels. However, they generate NOx emissions, which cause air pollution and damage human health, and reducing these is an air quality imperative. A major hurdle to this is that lean premixed combustion, essential for further NOx emission reductions, is highly susceptible to thermoacoustic instability. This is caused by a two-way coupling between unsteady combustion and acoustic waves, and the resulting large pressure oscillations can cause severe mechanical damage. Computational methods for predicting thermoacoustic instability, fast and accurate enough to be used as part of the industrial design process, are urgently needed.
The only computational methods with the prospect of being fast enough are those based on coupled treatment of the acoustic waves and unsteady combustion. These exploit the amenity of the acoustic waves to analytical modelling, allowing costly simulations to be directed only at the more complex flame. They show real promise: my group recently demonstrated the first accurate coupled predictions for lab-scale combustors. The method does not yet extend to industrial combustors, the more complex flow-fields in these rendering current acoustic models overly-simplistic. I propose to comprehensively overhaul acoustic models across the entirety of the combustor, accounting for real and important acoustic-flow interactions. These new models will offer the breakthrough prospect of extending efficient, accurate predictive capability to industrial combustors, which has a real chance of facilitating future, instability free, very low NOx gas turbines.
Summary
Gas turbines are an essential ingredient in the long-term energy and aviation mix. They are flexible, offer fast start-up and the ability to burn renewable-generated fuels. However, they generate NOx emissions, which cause air pollution and damage human health, and reducing these is an air quality imperative. A major hurdle to this is that lean premixed combustion, essential for further NOx emission reductions, is highly susceptible to thermoacoustic instability. This is caused by a two-way coupling between unsteady combustion and acoustic waves, and the resulting large pressure oscillations can cause severe mechanical damage. Computational methods for predicting thermoacoustic instability, fast and accurate enough to be used as part of the industrial design process, are urgently needed.
The only computational methods with the prospect of being fast enough are those based on coupled treatment of the acoustic waves and unsteady combustion. These exploit the amenity of the acoustic waves to analytical modelling, allowing costly simulations to be directed only at the more complex flame. They show real promise: my group recently demonstrated the first accurate coupled predictions for lab-scale combustors. The method does not yet extend to industrial combustors, the more complex flow-fields in these rendering current acoustic models overly-simplistic. I propose to comprehensively overhaul acoustic models across the entirety of the combustor, accounting for real and important acoustic-flow interactions. These new models will offer the breakthrough prospect of extending efficient, accurate predictive capability to industrial combustors, which has a real chance of facilitating future, instability free, very low NOx gas turbines.
Max ERC Funding
1 985 288 €
Duration
Start date: 2018-06-01, End date: 2023-05-31
Project acronym AISLES
Project Archipelagic Imperatives: Shipwreck and Lifesaving in European Societies since 1800
Researcher (PI) Henning TRuePER
Host Institution (HI) GEISTESWISSENSCHAFTLICHE ZENTREN BERLIN EV
Country Germany
Call Details Consolidator Grant (CoG), SH6, ERC-2019-COG
Summary Why does humanitarianism take the form of an archipelago, an aggregation of “single issues,” selective, resistant to generalization, and even at times inconsistent? In order to answer this question, which is crucial to, but has been sidelined in histories of humanitarianism, the project develops a novel approach. This approach homes in on the rupture of humanitarian morality with quotidian moral norms and values.
For this purpose, the project investigates the history of a particular moral norm, the imperative of saving lives from shipwreck, that emerged in the ambit of volunteer lifeboat movements from the 1820s onward. Such movements had emerged first in Britain and the Netherlands, then elsewhere, most prominently France and Germany. The imperative in question took the form of a novel unconditional norm that demanded taking counterintuitive risks in order to save lives. Previously, assistance to the shipwrecked had been situational. Moral detachment from suffering had been recognized as a value. Existential risk had constituted an exemption from lifesaving duty. Lifeboat movements overturned this quotidian moral rationale. This shift was neither determined by economic incentives nor by technological or legal innovation. The saving of lives from shipwreck thus provides an ideal laboratory, with a rich and varied source base, for understanding humanitarian-moral innovation on its own terms.
The intervention of the project is twofold. On the plane of historical knowledge, it provides a model for the deep contextual analysis of moral culture in terms of the emergence, sustenance, representation, and insular distinctness of humanitarian imperatives. On the plane of theoretical knowledge, the project develops innovative answers to questions of moral theory, especially about the generality of norms and the conflicted relation of humanitarianism and everyday morality. The project develops novel methodological tools for combining moral theorizing and historical research.
Summary
Why does humanitarianism take the form of an archipelago, an aggregation of “single issues,” selective, resistant to generalization, and even at times inconsistent? In order to answer this question, which is crucial to, but has been sidelined in histories of humanitarianism, the project develops a novel approach. This approach homes in on the rupture of humanitarian morality with quotidian moral norms and values.
For this purpose, the project investigates the history of a particular moral norm, the imperative of saving lives from shipwreck, that emerged in the ambit of volunteer lifeboat movements from the 1820s onward. Such movements had emerged first in Britain and the Netherlands, then elsewhere, most prominently France and Germany. The imperative in question took the form of a novel unconditional norm that demanded taking counterintuitive risks in order to save lives. Previously, assistance to the shipwrecked had been situational. Moral detachment from suffering had been recognized as a value. Existential risk had constituted an exemption from lifesaving duty. Lifeboat movements overturned this quotidian moral rationale. This shift was neither determined by economic incentives nor by technological or legal innovation. The saving of lives from shipwreck thus provides an ideal laboratory, with a rich and varied source base, for understanding humanitarian-moral innovation on its own terms.
The intervention of the project is twofold. On the plane of historical knowledge, it provides a model for the deep contextual analysis of moral culture in terms of the emergence, sustenance, representation, and insular distinctness of humanitarian imperatives. On the plane of theoretical knowledge, the project develops innovative answers to questions of moral theory, especially about the generality of norms and the conflicted relation of humanitarianism and everyday morality. The project develops novel methodological tools for combining moral theorizing and historical research.
Max ERC Funding
1 912 016 €
Duration
Start date: 2020-05-01, End date: 2025-04-30
Project acronym ALFA
Project Shaping a European Scientific Scene : Alfonsine Astronomy
Researcher (PI) Matthieu Husson
Host Institution (HI) CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
Country France
Call Details Consolidator Grant (CoG), SH6, ERC-2016-COG
Summary Alfonsine astronomy is arguably among the first European scientific achievements. It shaped a scene for actors like Regiomontanus or Copernicus. There is however little detailed historical analysis encompassing its development in its full breadth. ALFA addresses this issue by studying tables, instruments, mathematical and theoretical texts in a methodologically innovative way relying on approaches from the history of manuscript cultures, history of mathematics, and history of astronomy.
ALFA integrates these approaches not only to benefit from different perspectives but also to build new questions from their interactions. For instance the analysis of mathematical practices in astral sciences manuscripts induces new ways to analyse the documents and to think about astronomical questions.
Relying on these approaches the main objectives of ALFA are thus to:
- Retrace the development of the corpus of Alfonsine texts from its origin in the second half of the 13th century to the end of the 15th century by following, on the manuscript level, the milieus fostering it;
- Analyse the Alfonsine astronomers’ practices, their relations to mathematics, to the natural world, to proofs and justification, their intellectual context and audiences;
- Build a meaningful narrative showing how astronomers in different milieus with diverse practices shaped, also from Arabic materials, an original scientific scene in Europe.
ALFA will shed new light on the intellectual history of the late medieval period as a whole and produce a better understanding of its relations to related scientific periods in Europe and beyond. It will also produce methodological breakthroughs impacting the ways history of knowledge is practiced outside the field of ancient and medieval sciences. Efforts will be devoted to bring these results not only to the relevant scholarly communities but also to a wider audience as a resource in the public debates around science, knowledge and culture.
Summary
Alfonsine astronomy is arguably among the first European scientific achievements. It shaped a scene for actors like Regiomontanus or Copernicus. There is however little detailed historical analysis encompassing its development in its full breadth. ALFA addresses this issue by studying tables, instruments, mathematical and theoretical texts in a methodologically innovative way relying on approaches from the history of manuscript cultures, history of mathematics, and history of astronomy.
ALFA integrates these approaches not only to benefit from different perspectives but also to build new questions from their interactions. For instance the analysis of mathematical practices in astral sciences manuscripts induces new ways to analyse the documents and to think about astronomical questions.
Relying on these approaches the main objectives of ALFA are thus to:
- Retrace the development of the corpus of Alfonsine texts from its origin in the second half of the 13th century to the end of the 15th century by following, on the manuscript level, the milieus fostering it;
- Analyse the Alfonsine astronomers’ practices, their relations to mathematics, to the natural world, to proofs and justification, their intellectual context and audiences;
- Build a meaningful narrative showing how astronomers in different milieus with diverse practices shaped, also from Arabic materials, an original scientific scene in Europe.
ALFA will shed new light on the intellectual history of the late medieval period as a whole and produce a better understanding of its relations to related scientific periods in Europe and beyond. It will also produce methodological breakthroughs impacting the ways history of knowledge is practiced outside the field of ancient and medieval sciences. Efforts will be devoted to bring these results not only to the relevant scholarly communities but also to a wider audience as a resource in the public debates around science, knowledge and culture.
Max ERC Funding
1 871 250 €
Duration
Start date: 2017-09-01, End date: 2022-08-31
Project acronym ALTER-brain
Project Metastasis-associated altered molecular patterns in the brain
Researcher (PI) Manuel VALIENTE
Host Institution (HI) FUNDACION CENTRO NACIONAL DE INVESTIGACIONES ONCOLOGICAS CARLOS III
Country Spain
Call Details Consolidator Grant (CoG), LS4, ERC-2019-COG
Summary Organ colonization is the most inefficient step of metastasis. However, once a few cancer cells manage to re-initiate their growth in the brain, the initial naïve microenvironment, which was not favouring and even actively limiting the number of potential metastasis initiating cells, is slowly rewired into a different ecosystem with pro-metastatic properties. In this project (ALTER-brain), we will study the biology of microenvironment reprogramming to explore innovative ways of treating metastasis.
Microenvironment reprogramming relies on altered molecular patterns that emerge in specific brain cell types simultaneously to the outgrowth of metastases. Dissecting the biology of these emerging patterns and their functional consequences could provide the basis to prevent metastasis but also to treat advances lesions. A key objective of ALTER-brain is the identification of newly established functional networks among previously non-connected components of the microenvironment that are critical to nurture tumour growth.
This research proposal focuses on metastasis in the brain given its rising incidence, poor therapeutic options and short survival rates upon diagnosis. ALTER-brain will use novel (i.e. spontaneous metastasis) and clinically relevant (i.e. relapse after therapy) experimental mouse models of brain metastasis combined with genetically engineered mice in which we will target specific components of the microenvironment. In addition, we will apply novel lineage tracing technologies to understand the origin and emerging heterogeneity of the reprogrammed microenvironment. Given the clinical relevance of our research, human brain metastasis provided by our clinical network will be used to validate key findings.
ALTER-brain will identify key principles underlying the unknown biology of the brain under a specific pathological pressure that might be translated to other highly prevalent disorders affecting this organ in the future.
Summary
Organ colonization is the most inefficient step of metastasis. However, once a few cancer cells manage to re-initiate their growth in the brain, the initial naïve microenvironment, which was not favouring and even actively limiting the number of potential metastasis initiating cells, is slowly rewired into a different ecosystem with pro-metastatic properties. In this project (ALTER-brain), we will study the biology of microenvironment reprogramming to explore innovative ways of treating metastasis.
Microenvironment reprogramming relies on altered molecular patterns that emerge in specific brain cell types simultaneously to the outgrowth of metastases. Dissecting the biology of these emerging patterns and their functional consequences could provide the basis to prevent metastasis but also to treat advances lesions. A key objective of ALTER-brain is the identification of newly established functional networks among previously non-connected components of the microenvironment that are critical to nurture tumour growth.
This research proposal focuses on metastasis in the brain given its rising incidence, poor therapeutic options and short survival rates upon diagnosis. ALTER-brain will use novel (i.e. spontaneous metastasis) and clinically relevant (i.e. relapse after therapy) experimental mouse models of brain metastasis combined with genetically engineered mice in which we will target specific components of the microenvironment. In addition, we will apply novel lineage tracing technologies to understand the origin and emerging heterogeneity of the reprogrammed microenvironment. Given the clinical relevance of our research, human brain metastasis provided by our clinical network will be used to validate key findings.
ALTER-brain will identify key principles underlying the unknown biology of the brain under a specific pathological pressure that might be translated to other highly prevalent disorders affecting this organ in the future.
Max ERC Funding
1 897 437 €
Duration
Start date: 2020-07-01, End date: 2025-06-30
Project acronym AMADEUS
Project Advancing CO2 Capture Materials by Atomic Scale Design: the Quest for Understanding
Researcher (PI) Christoph Ruediger MueLLER
Host Institution (HI) EIDGENOESSISCHE TECHNISCHE HOCHSCHULE ZUERICH
Country Switzerland
Call Details Consolidator Grant (CoG), PE8, ERC-2018-COG
Summary Carbon dioxide capture and storage is a technology to mitigate climate change by removing CO2 from flue gas streams or the atmosphere and storing it in geological formations. While CO2 removal from natural gas by amine scrubbing is implemented on the large scale, the cost of such process is currently prohibitively expensive. Inexpensive alkali earth metal oxides (MgO and CaO) feature high theoretical CO2 uptakes, but suffer from poor cyclic stability and slow kinetics. Yet, the key objective of recent research on alkali earth metal oxide based CO2 sorbents has been the processing of inexpensive, naturally occurring CO2 sorbents, notably limestone and dolomite, to stabilize their modest CO2 uptake and to establish re-activation methods through engineering approaches. While this research demonstrated a landmark Megawatt (MW) scale viability of the process, our fundamental understanding of the underlying CO2 capture, regeneration and deactivation pathways did not improve. The latter knowledge is, however, vital for the rational design of improved, yet practical CaO and MgO sorbents. Hence this proposal is concerned with obtaining an understanding of the underlying mechanisms that control the ability of an alkali metal oxide to capture a large quantity of CO2 with a high rate, to regenerate and to operate with high cyclic stability. Achieving these aims relies on the ability to fabricate model structures and to characterize in great detail their surface chemistry, morphology, chemical composition and changes therein under reactive conditions. This makes the development of operando and in situ characterization tools an essential prerequisite. Advances in these areas shall allow achieving the overall goal of this project, viz. to formulate a roadmap to fabricate improved CO2 sorbents through their precisely engineered structure, composition and morphology.
Summary
Carbon dioxide capture and storage is a technology to mitigate climate change by removing CO2 from flue gas streams or the atmosphere and storing it in geological formations. While CO2 removal from natural gas by amine scrubbing is implemented on the large scale, the cost of such process is currently prohibitively expensive. Inexpensive alkali earth metal oxides (MgO and CaO) feature high theoretical CO2 uptakes, but suffer from poor cyclic stability and slow kinetics. Yet, the key objective of recent research on alkali earth metal oxide based CO2 sorbents has been the processing of inexpensive, naturally occurring CO2 sorbents, notably limestone and dolomite, to stabilize their modest CO2 uptake and to establish re-activation methods through engineering approaches. While this research demonstrated a landmark Megawatt (MW) scale viability of the process, our fundamental understanding of the underlying CO2 capture, regeneration and deactivation pathways did not improve. The latter knowledge is, however, vital for the rational design of improved, yet practical CaO and MgO sorbents. Hence this proposal is concerned with obtaining an understanding of the underlying mechanisms that control the ability of an alkali metal oxide to capture a large quantity of CO2 with a high rate, to regenerate and to operate with high cyclic stability. Achieving these aims relies on the ability to fabricate model structures and to characterize in great detail their surface chemistry, morphology, chemical composition and changes therein under reactive conditions. This makes the development of operando and in situ characterization tools an essential prerequisite. Advances in these areas shall allow achieving the overall goal of this project, viz. to formulate a roadmap to fabricate improved CO2 sorbents through their precisely engineered structure, composition and morphology.
Max ERC Funding
1 994 900 €
Duration
Start date: 2019-06-01, End date: 2024-05-31