Project acronym 0MSPIN
Project Spintronics based on relativistic phenomena in systems with zero magnetic moment
Researcher (PI) Tomá Jungwirth
Host Institution (HI) FYZIKALNI USTAV AV CR V.V.I
Call Details Advanced Grant (AdG), PE3, ERC-2010-AdG_20100224
Summary The 0MSPIN project consists of an extensive integrated theoretical, experimental and device development programme of research opening a radical new approach to spintronics. Spintronics has the potential to supersede existing storage and memory applications, and to provide alternatives to current CMOS technology. Ferromagnetic matels used in all current spintronics applications may make it impractical to realise the full potential of spintronics. Metals are unsuitable for transistor and information processing applications, for opto-electronics, or for high-density integration. The 0MSPIN project aims to remove the major road-block holding back the development of spintronics in a radical way: removing the ferromagnetic component from key active parts or from the whole of the spintronic devices. This approach is based on exploiting the combination of exchange and spin-orbit coupling phenomena and material systems with zero macroscopic moment. The goal of the 0MSPIN is to provide a new paradigm by which spintronics can enter the realms of conventional semiconductors in both fundamental condensed matter research and in information technologies. In the central part of the proposal, the research towards this goal is embedded within a materials science project whose aim is to introduce into physics and microelectronics an entirely new class of semiconductors. 0MSPIN seeks to exploit three classes of material systems: (1) Antiferromagnetic bi-metallic 3d-5d alloys (e.g. Mn2Au). (2) Antiferromagnetic I-II-V semiconductors (e.g. LiMnAs). (3) Non-magnetic spin-orbit coupled semiconductors with injected spin-polarized currents (e.g. 2D III-V structures). Proof of concept devices operating at high temperatures will be fabricated to show-case new functionalities offered by zero-moment systems for sensing and memory applications, information processing, and opto-electronics technologies.
Summary
The 0MSPIN project consists of an extensive integrated theoretical, experimental and device development programme of research opening a radical new approach to spintronics. Spintronics has the potential to supersede existing storage and memory applications, and to provide alternatives to current CMOS technology. Ferromagnetic matels used in all current spintronics applications may make it impractical to realise the full potential of spintronics. Metals are unsuitable for transistor and information processing applications, for opto-electronics, or for high-density integration. The 0MSPIN project aims to remove the major road-block holding back the development of spintronics in a radical way: removing the ferromagnetic component from key active parts or from the whole of the spintronic devices. This approach is based on exploiting the combination of exchange and spin-orbit coupling phenomena and material systems with zero macroscopic moment. The goal of the 0MSPIN is to provide a new paradigm by which spintronics can enter the realms of conventional semiconductors in both fundamental condensed matter research and in information technologies. In the central part of the proposal, the research towards this goal is embedded within a materials science project whose aim is to introduce into physics and microelectronics an entirely new class of semiconductors. 0MSPIN seeks to exploit three classes of material systems: (1) Antiferromagnetic bi-metallic 3d-5d alloys (e.g. Mn2Au). (2) Antiferromagnetic I-II-V semiconductors (e.g. LiMnAs). (3) Non-magnetic spin-orbit coupled semiconductors with injected spin-polarized currents (e.g. 2D III-V structures). Proof of concept devices operating at high temperatures will be fabricated to show-case new functionalities offered by zero-moment systems for sensing and memory applications, information processing, and opto-electronics technologies.
Max ERC Funding
1 938 000 €
Duration
Start date: 2011-06-01, End date: 2016-05-31
Project acronym 2DTHERMS
Project Design of new thermoelectric devices based on layered and field modulated nanostructures of strongly correlated electron systems
Researcher (PI) Jose Francisco Rivadulla Fernandez
Host Institution (HI) UNIVERSIDAD DE SANTIAGO DE COMPOSTELA
Call Details Starting Grant (StG), PE3, ERC-2010-StG_20091028
Summary Design of new thermoelectric devices based on layered and field modulated nanostructures of strongly correlated electron systems
Summary
Design of new thermoelectric devices based on layered and field modulated nanostructures of strongly correlated electron systems
Max ERC Funding
1 427 190 €
Duration
Start date: 2010-11-01, End date: 2015-10-31
Project acronym 2LIVEr
Project IL-2 gene therapy for chronic hepatitis B virus infection
Researcher (PI) Matteo IANNACONE
Host Institution (HI) OSPEDALE SAN RAFFAELE SRL
Call Details Proof of Concept (PoC), ERC-2020-PoC
Summary Hepatitis B virus (HBV) infections remain a major public health issue worldwide. Over 350 -400 million people are chronically infected by HBV, and about 1 million people die each year from the complications of this infection (cirrhosis and hepatocellular carcinoma) with a consequent hefty economic impact on national health systems. This led the World Health Organization to recognise HBV infection as a key priority and adopt the global health sector strategy to eliminate viral hepatitis, with a target of reducing new infections by 90% and mortality by 65% by 2030.
The risk of developing a chronic infection in healthy adults is due to a weaker, dysfunctional and narrowly focused CD8+ T cell response. Since the mechanisms underlying HBV persistence are not fully elucidated, current treatments (antiviral drugs and Interferon) aim to reduce the development of liver disease, while a definitive treatment for curing this infection is not yet available on the market.
Within the ERC Consolidator Grant 725038 “FATE”, we recently characterized the mechanisms behind the ineffective CD8+ T cell response towards HBV, demonstrating the potential efficacy of interleukin-2 (IL-2) – a cytokine – to reactivate it, thus achieving antiviral activity. This discovery, jointly with our proprietary third-generation, self-inactivating lentiviral vectors (LVs) that allow selective hepatocellular expression of IL-2, pave the way to single-dose gene therapy-based approach, a potential functional cure against chronic hepatitis B.
2LIVEr project intends to optimize and further validate our novel therapeutic approach from both a technical and commercial standpoint, moving from TRL3 to TRL4, thus fastening the roadmap towards the market.
Summary
Hepatitis B virus (HBV) infections remain a major public health issue worldwide. Over 350 -400 million people are chronically infected by HBV, and about 1 million people die each year from the complications of this infection (cirrhosis and hepatocellular carcinoma) with a consequent hefty economic impact on national health systems. This led the World Health Organization to recognise HBV infection as a key priority and adopt the global health sector strategy to eliminate viral hepatitis, with a target of reducing new infections by 90% and mortality by 65% by 2030.
The risk of developing a chronic infection in healthy adults is due to a weaker, dysfunctional and narrowly focused CD8+ T cell response. Since the mechanisms underlying HBV persistence are not fully elucidated, current treatments (antiviral drugs and Interferon) aim to reduce the development of liver disease, while a definitive treatment for curing this infection is not yet available on the market.
Within the ERC Consolidator Grant 725038 “FATE”, we recently characterized the mechanisms behind the ineffective CD8+ T cell response towards HBV, demonstrating the potential efficacy of interleukin-2 (IL-2) – a cytokine – to reactivate it, thus achieving antiviral activity. This discovery, jointly with our proprietary third-generation, self-inactivating lentiviral vectors (LVs) that allow selective hepatocellular expression of IL-2, pave the way to single-dose gene therapy-based approach, a potential functional cure against chronic hepatitis B.
2LIVEr project intends to optimize and further validate our novel therapeutic approach from both a technical and commercial standpoint, moving from TRL3 to TRL4, thus fastening the roadmap towards the market.
Max ERC Funding
150 000 €
Duration
Start date: 2020-07-01, End date: 2021-12-31
Project acronym 3-TOP
Project Exploring the physics of 3-dimensional topological insulators
Researcher (PI) Laurens Wigbolt Molenkamp
Host Institution (HI) JULIUS-MAXIMILIANS-UNIVERSITAT WURZBURG
Call Details Advanced Grant (AdG), PE3, ERC-2010-AdG_20100224
Summary Topological insulators constitute a novel class of materials where the topological details of the bulk band structure induce a robust surface state on the edges of the material. While transport data for 2-dimensional topological insulators have recently become available, experiments on their 3-dimensional counterparts are mainly limited to photoelectron spectroscopy. At the same time, a plethora of interesting novel physical phenomena have been predicted to occur in such systems.
In this proposal, we sketch an approach to tackle the transport and magnetic properties of the surface states in these materials. This starts with high quality layer growth, using molecular beam epitaxy, of bulk layers of HgTe, Bi2Se3 and Bi2Te3, which are the prime candidates to show the novel physics expected in this field. The existence of the relevant surface states will be assessed spectroscopically, but from there on research will focus on fabricating and characterizing nanostructures designed to elucidate the transport and magnetic properties of the topological surfaces using electrical, optical and scanning probe techniques. Apart from a general characterization of the Dirac band structure of the surface states, research will focus on the predicted magnetic monopole-like response of the system to an electrical test charge. In addition, much effort will be devoted to contacting the surface state with superconducting and magnetic top layers, with the final aim of demonstrating Majorana fermion behavior. As a final benefit, growth of thin high quality thin Bi2Se3 or Bi2Te3 layers could allow for a demonstration of the (2-dimensional) quantum spin Hall effect at room temperature - offering a road map to dissipation-less transport for the semiconductor industry.
Summary
Topological insulators constitute a novel class of materials where the topological details of the bulk band structure induce a robust surface state on the edges of the material. While transport data for 2-dimensional topological insulators have recently become available, experiments on their 3-dimensional counterparts are mainly limited to photoelectron spectroscopy. At the same time, a plethora of interesting novel physical phenomena have been predicted to occur in such systems.
In this proposal, we sketch an approach to tackle the transport and magnetic properties of the surface states in these materials. This starts with high quality layer growth, using molecular beam epitaxy, of bulk layers of HgTe, Bi2Se3 and Bi2Te3, which are the prime candidates to show the novel physics expected in this field. The existence of the relevant surface states will be assessed spectroscopically, but from there on research will focus on fabricating and characterizing nanostructures designed to elucidate the transport and magnetic properties of the topological surfaces using electrical, optical and scanning probe techniques. Apart from a general characterization of the Dirac band structure of the surface states, research will focus on the predicted magnetic monopole-like response of the system to an electrical test charge. In addition, much effort will be devoted to contacting the surface state with superconducting and magnetic top layers, with the final aim of demonstrating Majorana fermion behavior. As a final benefit, growth of thin high quality thin Bi2Se3 or Bi2Te3 layers could allow for a demonstration of the (2-dimensional) quantum spin Hall effect at room temperature - offering a road map to dissipation-less transport for the semiconductor industry.
Max ERC Funding
2 419 590 €
Duration
Start date: 2011-04-01, End date: 2016-03-31
Project acronym 3CBIOTECH
Project Cold Carbon Catabolism of Microbial Communities underprinning a Sustainable Bioenergy and Biorefinery Economy
Researcher (PI) Gavin James Collins
Host Institution (HI) NATIONAL UNIVERSITY OF IRELAND GALWAY
Call Details Starting Grant (StG), LS9, ERC-2010-StG_20091118
Summary The applicant will collaborate with Irish, European and U.S.-based colleagues to develop a sustainable biorefinery and bioenergy industry in Ireland and Europe. The focus of this ERC Starting Grant will be the application of classical microbiological, physiological and real-time polymerase chain reaction (PCR)-based assays, to qualitatively and quantitatively characterize microbial communities underpinning novel and innovative, low-temperature, anaerobic waste (and other biomass) conversion technologies, including municipal wastewater treatment and, demonstration- and full-scale biorefinery applications.
Anaerobic digestion (AD) is a naturally-occurring process, which is widely applied for the conversion of waste to methane-containing biogas. Low-temperature (<20 degrees C) AD has been applied by the applicant as a cost-effective alternative to mesophilic (c. 35C) AD for the treatment of several waste categories. However, the microbiology of low-temperature AD is poorly understood. The applicant will work with microbial consortia isolated from anaerobic bioreactors, which have been operated for long-term experiments (>3.5 years), and include organic acid-oxidizing, hydrogen-producing syntrophic microbes and hydrogen-consuming methanogens. A major focus of the project will be the ecophysiology of psychrotolerant and psychrophilic methanogens already identified and cultivated by the applicant. The project will also investigate the role(s) of poorly-understood Crenarchaeota populations and homoacetogenic bacteria, in complex consortia. The host organization is a leading player in the microbiology of waste-to-energy applications. The applicant will train a team of scientists in all aspects of the microbiology and bioengineering of biomass conversion systems.
Summary
The applicant will collaborate with Irish, European and U.S.-based colleagues to develop a sustainable biorefinery and bioenergy industry in Ireland and Europe. The focus of this ERC Starting Grant will be the application of classical microbiological, physiological and real-time polymerase chain reaction (PCR)-based assays, to qualitatively and quantitatively characterize microbial communities underpinning novel and innovative, low-temperature, anaerobic waste (and other biomass) conversion technologies, including municipal wastewater treatment and, demonstration- and full-scale biorefinery applications.
Anaerobic digestion (AD) is a naturally-occurring process, which is widely applied for the conversion of waste to methane-containing biogas. Low-temperature (<20 degrees C) AD has been applied by the applicant as a cost-effective alternative to mesophilic (c. 35C) AD for the treatment of several waste categories. However, the microbiology of low-temperature AD is poorly understood. The applicant will work with microbial consortia isolated from anaerobic bioreactors, which have been operated for long-term experiments (>3.5 years), and include organic acid-oxidizing, hydrogen-producing syntrophic microbes and hydrogen-consuming methanogens. A major focus of the project will be the ecophysiology of psychrotolerant and psychrophilic methanogens already identified and cultivated by the applicant. The project will also investigate the role(s) of poorly-understood Crenarchaeota populations and homoacetogenic bacteria, in complex consortia. The host organization is a leading player in the microbiology of waste-to-energy applications. The applicant will train a team of scientists in all aspects of the microbiology and bioengineering of biomass conversion systems.
Max ERC Funding
1 499 797 €
Duration
Start date: 2011-05-01, End date: 2016-04-30
Project acronym 3DALIGN
Project Enhancing the performance of 3D-printed organic thermoelectrics by electric field-assisted molecular alignment
Researcher (PI) Francisco Molina-Lopez
Host Institution (HI) KATHOLIEKE UNIVERSITEIT LEUVEN
Call Details Starting Grant (StG), PE7, ERC-2020-STG
Summary Thermoelectrics (TEs) are important because they can convert heat directly into electrical energy and enable efficient heating/cooling. However, their popularization has been hindered by 1) their low efficiency (especially at room temperature), 2) the use of rare/toxic materials, and 3) the difficulty to process those materials. In 3DALIGN, I target a 3-in-1 solution to these challenges by using for the first time electric-field-assisted molecular alignment of 3D-printed TE polymers. High electrical/low thermal conductivity is required for efficient TEs, but both conductivities go hand in hand in traditional inorganic TE materials. This paradigm can shift for polymers, which possess complicated molecular structure. Despite their relatively low electrical conductivity, conducting polymers are appealing for TEs due to their much lower thermal conductivity than inorganic TE materials. Existing studies of organic TEs have focused on finding new materials, but no attention has been paid to molecular ordering, a known strategy to improve performance in organic transistors. I have recently developed a versatile method to induce molecular alignment in solution-processed polymers by using externally applied electric fields. In 3DALIGN, I propose to use this new method to boost the electrical conductivity of polymer TEs while inducing minimal alteration in their thermal conductivity. The high-risk of this goal is mitigated by other advantages of using polymer TEs: polymers are less toxic and more abundant than inorganic TE materials; and they are easy to 3D print, enabling a simple fabrication route for large-area through-plane TE structures that will lead to novel applications. In conclusion, this project will shed light in the relationship between molecular ordering and transport properties of organic electronic materials. If successful, it will also introduce a breakthrough in the performance and feasibility of TEs.
Summary
Thermoelectrics (TEs) are important because they can convert heat directly into electrical energy and enable efficient heating/cooling. However, their popularization has been hindered by 1) their low efficiency (especially at room temperature), 2) the use of rare/toxic materials, and 3) the difficulty to process those materials. In 3DALIGN, I target a 3-in-1 solution to these challenges by using for the first time electric-field-assisted molecular alignment of 3D-printed TE polymers. High electrical/low thermal conductivity is required for efficient TEs, but both conductivities go hand in hand in traditional inorganic TE materials. This paradigm can shift for polymers, which possess complicated molecular structure. Despite their relatively low electrical conductivity, conducting polymers are appealing for TEs due to their much lower thermal conductivity than inorganic TE materials. Existing studies of organic TEs have focused on finding new materials, but no attention has been paid to molecular ordering, a known strategy to improve performance in organic transistors. I have recently developed a versatile method to induce molecular alignment in solution-processed polymers by using externally applied electric fields. In 3DALIGN, I propose to use this new method to boost the electrical conductivity of polymer TEs while inducing minimal alteration in their thermal conductivity. The high-risk of this goal is mitigated by other advantages of using polymer TEs: polymers are less toxic and more abundant than inorganic TE materials; and they are easy to 3D print, enabling a simple fabrication route for large-area through-plane TE structures that will lead to novel applications. In conclusion, this project will shed light in the relationship between molecular ordering and transport properties of organic electronic materials. If successful, it will also introduce a breakthrough in the performance and feasibility of TEs.
Max ERC Funding
1 710 853 €
Duration
Start date: 2021-02-01, End date: 2026-01-31
Project acronym 3DX-FLASH
Project Probing MHz processes in 3D with X-ray microscopy
Researcher (PI) Pablo Villanueva Perez
Host Institution (HI) LUNDS UNIVERSITET
Call Details Starting Grant (StG), PE4, ERC-2020-STG
Summary I aim to develop an X-ray imaging technique capable of filming processes in 3D, with a temporal resolution several orders of magnitude faster than up-to-date 3D X-ray imaging techniques.
The unique penetration power of X-rays allows us to study systems in their native environment. This property has led to the development of X-ray microtomography (µCT). µCT acquires 3D information, which determines the functionality and mechanical properties of nature, by rotating a sample with respect to the X-ray source. µCT is a crucial tool for several scientific disciplines such as physics, biology, and chemistry.
Over the last decade, µCT has become a technique capable of not only recording 3D information but also filming dynamical processes. Several breakthroughs have made this possible: i) intense X-ray sources (synchrotron light sources), ii) efficient and fast X-ray detectors, and iii) fast 3D reconstruction algorithms. Despite all of these developments, the acquisition protocols remain unchanged, i.e., the sample is only rotated faster. This fast rotation introduces forces which may alter the studied dynamics and ultimately limit the achievable temporal resolution.
My project is to establish an X-ray microscope that avoids the sample rotation, obtaining 3D information from a single X-ray flash by splitting it into nine-angularly resolved beams which illuminate the sample simultaneously. This approach, when implemented at intense X-ray sources such as synchrotron light sources and X-ray free-electron lasers, will allow the filming of natural processes with micrometer to nanometer resolution and resolve dynamics from microseconds to femtoseconds. To demonstrate its capabilities, I will study fundamental processes in cellulose fibers, a renewable biomaterial, which can replace fossil-based materials, such as plastics. This technique will open up the possibility to film dynamics in 3D to answer questions coming from industry and natural sciences at rates not accessible today.
Summary
I aim to develop an X-ray imaging technique capable of filming processes in 3D, with a temporal resolution several orders of magnitude faster than up-to-date 3D X-ray imaging techniques.
The unique penetration power of X-rays allows us to study systems in their native environment. This property has led to the development of X-ray microtomography (µCT). µCT acquires 3D information, which determines the functionality and mechanical properties of nature, by rotating a sample with respect to the X-ray source. µCT is a crucial tool for several scientific disciplines such as physics, biology, and chemistry.
Over the last decade, µCT has become a technique capable of not only recording 3D information but also filming dynamical processes. Several breakthroughs have made this possible: i) intense X-ray sources (synchrotron light sources), ii) efficient and fast X-ray detectors, and iii) fast 3D reconstruction algorithms. Despite all of these developments, the acquisition protocols remain unchanged, i.e., the sample is only rotated faster. This fast rotation introduces forces which may alter the studied dynamics and ultimately limit the achievable temporal resolution.
My project is to establish an X-ray microscope that avoids the sample rotation, obtaining 3D information from a single X-ray flash by splitting it into nine-angularly resolved beams which illuminate the sample simultaneously. This approach, when implemented at intense X-ray sources such as synchrotron light sources and X-ray free-electron lasers, will allow the filming of natural processes with micrometer to nanometer resolution and resolve dynamics from microseconds to femtoseconds. To demonstrate its capabilities, I will study fundamental processes in cellulose fibers, a renewable biomaterial, which can replace fossil-based materials, such as plastics. This technique will open up the possibility to film dynamics in 3D to answer questions coming from industry and natural sciences at rates not accessible today.
Max ERC Funding
1 999 213 €
Duration
Start date: 2021-03-01, End date: 2026-02-28
Project acronym 3S-BTMUC
Project Soft, Slimy, Sliding Interfaces: Biotribological Properties of Mucins and Mucus gels
Researcher (PI) Seunghwan Lee
Host Institution (HI) DANMARKS TEKNISKE UNIVERSITET
Call Details Starting Grant (StG), LS9, ERC-2010-StG_20091118
Summary Mucins are a family of high-molecular-weight glycoproteins and a major macromolecular constituent in slimy mucus gels that are covering the surface of internal biological tissues. A primary role of mucus gels in biological systems is known to be the protection and lubrication of underlying epithelial cell surfaces. This is intuitively well appreciated by both science community and the public, and yet detailed lubrication properties of mucins and mucus gels have remained largely unexplored to date. Detailed and systematic understanding of the lubrication mechanism of mucus gels is significant from many angles; firstly, lubricity of mucus gels is closely related with fundamental functions of various human organs, such as eye blinking, mastication in oral cavity, swallowing through esophagus, digestion in stomach, breathing through air way and respiratory organs, and thus often indicates the health state of those organs. Furthermore, for the application of various tissue-contacting devices or personal care products, e.g. catheters, endoscopes, and contact lenses, mucus gel layer is the first counter surface that comes into the mechanical and tribological contacts with them. Finally, remarkable lubricating performance by mucins and mucus gels in biological systems may provide many useful and possibly innovative hints in utilizing water as base lubricant for man-made engineering systems. This project thus proposes to carry out a 5 year research program focusing on exploring the lubricity of mucins and mucus gels by combining a broad range of experimental approaches in biology and tribology.
Summary
Mucins are a family of high-molecular-weight glycoproteins and a major macromolecular constituent in slimy mucus gels that are covering the surface of internal biological tissues. A primary role of mucus gels in biological systems is known to be the protection and lubrication of underlying epithelial cell surfaces. This is intuitively well appreciated by both science community and the public, and yet detailed lubrication properties of mucins and mucus gels have remained largely unexplored to date. Detailed and systematic understanding of the lubrication mechanism of mucus gels is significant from many angles; firstly, lubricity of mucus gels is closely related with fundamental functions of various human organs, such as eye blinking, mastication in oral cavity, swallowing through esophagus, digestion in stomach, breathing through air way and respiratory organs, and thus often indicates the health state of those organs. Furthermore, for the application of various tissue-contacting devices or personal care products, e.g. catheters, endoscopes, and contact lenses, mucus gel layer is the first counter surface that comes into the mechanical and tribological contacts with them. Finally, remarkable lubricating performance by mucins and mucus gels in biological systems may provide many useful and possibly innovative hints in utilizing water as base lubricant for man-made engineering systems. This project thus proposes to carry out a 5 year research program focusing on exploring the lubricity of mucins and mucus gels by combining a broad range of experimental approaches in biology and tribology.
Max ERC Funding
1 432 920 €
Duration
Start date: 2011-04-01, End date: 2016-03-31
Project acronym 4PI-SKY
Project 4 pi sky: Extreme Astrophysics with Revolutionary Radio Telescopes
Researcher (PI) Robert Philip Fender
Host Institution (HI) THE CHANCELLOR, MASTERS AND SCHOLARS OF THE UNIVERSITY OF OXFORD
Call Details Advanced Grant (AdG), PE9, ERC-2010-AdG_20100224
Summary Extreme astrophysical events such as relativistic flows, cataclysmic explosions and black hole accretion are one of the key areas for astrophysics in the 21st century. The extremes of physics experienced in these environments are beyond anything achievable in any laboratory on Earth, and provide a unique glimpse at the laws of physics operating in extraordinary regimes. All of these events are associated with transient radio emission, a tracer both of the acceleration of particles to relativistic energies, and coherent emitting regions with huge effective temperatures. By studying radio bursts from these phenomena we can pinpoint the sources of explosive events, understand the budget of kinetic feedback by explosive events in the ambient medium, and probe the physical state of the universe back to the epoch of reionisation, less than a billion years after the big bang. In seeking to push back the frontiers of extreme astrophysics, I will use a trio of revolutionary new radio telescopes, LOFAR, ASKAP and MeerKAT, pathfinders for the Square Kilometre Array, and all facilities in which I have a major role in the search for transients. I will build an infrastructure which transforms their combined operations for the discovery, classification and reporting of transient astrophysical events, over the whole sky, making them much more than the sum of their parts. This will include development of environments for the coordinated handling of extreme astrophysical events, in real time, via automated systems, as well as novel techniques for the detection of these events in a sea of noise. I will furthermore augment this program by buying in as a major partner to a rapid-response robotic optical telescope, and by cementing my relationship with an orbiting X-ray facility. This multiwavelength dimension will secure the astrophysical interpretation of our observational results and help to revolutionise high-energy astrophysics via a strong scientific exploitation program.
Summary
Extreme astrophysical events such as relativistic flows, cataclysmic explosions and black hole accretion are one of the key areas for astrophysics in the 21st century. The extremes of physics experienced in these environments are beyond anything achievable in any laboratory on Earth, and provide a unique glimpse at the laws of physics operating in extraordinary regimes. All of these events are associated with transient radio emission, a tracer both of the acceleration of particles to relativistic energies, and coherent emitting regions with huge effective temperatures. By studying radio bursts from these phenomena we can pinpoint the sources of explosive events, understand the budget of kinetic feedback by explosive events in the ambient medium, and probe the physical state of the universe back to the epoch of reionisation, less than a billion years after the big bang. In seeking to push back the frontiers of extreme astrophysics, I will use a trio of revolutionary new radio telescopes, LOFAR, ASKAP and MeerKAT, pathfinders for the Square Kilometre Array, and all facilities in which I have a major role in the search for transients. I will build an infrastructure which transforms their combined operations for the discovery, classification and reporting of transient astrophysical events, over the whole sky, making them much more than the sum of their parts. This will include development of environments for the coordinated handling of extreme astrophysical events, in real time, via automated systems, as well as novel techniques for the detection of these events in a sea of noise. I will furthermore augment this program by buying in as a major partner to a rapid-response robotic optical telescope, and by cementing my relationship with an orbiting X-ray facility. This multiwavelength dimension will secure the astrophysical interpretation of our observational results and help to revolutionise high-energy astrophysics via a strong scientific exploitation program.
Max ERC Funding
2 999 847 €
Duration
Start date: 2011-07-01, End date: 2017-06-30
Project acronym 5COFM
Project Five Centuries of Marriages
Researcher (PI) Anna Cabré
Host Institution (HI) UNIVERSIDAD AUTONOMA DE BARCELONA
Call Details Advanced Grant (AdG), SH6, ERC-2010-AdG_20100407
Summary This long-term research project is based on the data-mining of the Llibres d'Esposalles conserved at the Archives of the Barcelona Cathedral, an extraordinary data source comprising 244 books of marriage licenses records. It covers about 550.000 unions from over 250 parishes of the Diocese between 1451 and 1905. Its impeccable conservation is a miracle in a region where parish archives have undergone massive destruction. The books include data on the tax posed on each couple depending on their social class, on an eight-tiered scale. These data allow for research on multiple aspects of demographic research, especially on the very long run, such as: population estimates, marriage dynamics, cycles, and indirect estimations for fertility, migration and survival, as well as socio-economic studies related to social homogamy, social mobility, and transmission of social and occupational position. Being continuous over five centuries, the source constitutes a unique instrument to study the dynamics of population distribution, the expansion of the city of Barcelona and the constitution of its metropolitan area, as well as the chronology and the geography in the constitution of new social classes.
To this end, a digital library and a database, the Barcelona Historical Marriages Database (BHiMaD), are to be created and completed. An ERC-AG will help doing so while undertaking the research analysis of the database in parallel.
The research team, at the U. Autònoma de Barcelona, involves researchers from the Center for Demo-graphic Studies and the Computer Vision Center experts in historical databases and computer-aided recognition of ancient manuscripts. 5CofM will serve the preservation of the original “Llibres d’Esposalles” and unlock the full potential embedded in the collection.
Summary
This long-term research project is based on the data-mining of the Llibres d'Esposalles conserved at the Archives of the Barcelona Cathedral, an extraordinary data source comprising 244 books of marriage licenses records. It covers about 550.000 unions from over 250 parishes of the Diocese between 1451 and 1905. Its impeccable conservation is a miracle in a region where parish archives have undergone massive destruction. The books include data on the tax posed on each couple depending on their social class, on an eight-tiered scale. These data allow for research on multiple aspects of demographic research, especially on the very long run, such as: population estimates, marriage dynamics, cycles, and indirect estimations for fertility, migration and survival, as well as socio-economic studies related to social homogamy, social mobility, and transmission of social and occupational position. Being continuous over five centuries, the source constitutes a unique instrument to study the dynamics of population distribution, the expansion of the city of Barcelona and the constitution of its metropolitan area, as well as the chronology and the geography in the constitution of new social classes.
To this end, a digital library and a database, the Barcelona Historical Marriages Database (BHiMaD), are to be created and completed. An ERC-AG will help doing so while undertaking the research analysis of the database in parallel.
The research team, at the U. Autònoma de Barcelona, involves researchers from the Center for Demo-graphic Studies and the Computer Vision Center experts in historical databases and computer-aided recognition of ancient manuscripts. 5CofM will serve the preservation of the original “Llibres d’Esposalles” and unlock the full potential embedded in the collection.
Max ERC Funding
1 847 400 €
Duration
Start date: 2011-05-01, End date: 2016-04-30