Project acronym 4D-PET
Project Innovative PET scanner for dynamic imaging
Researcher (PI) Jose MarIa BENLLOCH BAVIERA
Host Institution (HI) AGENCIA ESTATAL CONSEJO SUPERIOR DEINVESTIGACIONES CIENTIFICAS
Country Spain
Call Details Advanced Grant (AdG), LS7, ERC-2015-AdG
Summary The main objective of 4D-PET is to develop an innovative whole-body PET scanner based in a new detector concept that stores 3D position and time of every single gamma interaction with unprecedented resolution. The combination of scanner geometrical design and high timing resolution will enable developing a full sequence of all gamma-ray interactions inside the scanner, including Compton interactions, like in a 3D movie. 4D-PET fully exploits Time Of Flight (TOF) information to obtain a better image quality and to increase scanner sensitivity, through the inclusion in the image formation of all Compton events occurring inside the detector, which are always rejected in state-of-the-art PET scanners. The new PET design will radically improve state-of-the-art PET performance features, overcoming limitations of current PET technology and opening up new diagnostic venues and very valuable physiological information
Summary
The main objective of 4D-PET is to develop an innovative whole-body PET scanner based in a new detector concept that stores 3D position and time of every single gamma interaction with unprecedented resolution. The combination of scanner geometrical design and high timing resolution will enable developing a full sequence of all gamma-ray interactions inside the scanner, including Compton interactions, like in a 3D movie. 4D-PET fully exploits Time Of Flight (TOF) information to obtain a better image quality and to increase scanner sensitivity, through the inclusion in the image formation of all Compton events occurring inside the detector, which are always rejected in state-of-the-art PET scanners. The new PET design will radically improve state-of-the-art PET performance features, overcoming limitations of current PET technology and opening up new diagnostic venues and very valuable physiological information
Max ERC Funding
2 048 386 €
Duration
Start date: 2017-01-01, End date: 2021-12-31
Project acronym BrainBIT
Project All-optical brain-to-brain behaviour and information transfer
Researcher (PI) Francesco PAVONE
Host Institution (HI) UNIVERSITA DEGLI STUDI DI FIRENZE
Country Italy
Call Details Advanced Grant (AdG), PE2, ERC-2015-AdG
Summary Exchange of information between different brains usually takes place through the interaction between bodies and the external environment. The ultimate goal of this project is to establish a novel paradigm of brain-to-brain communication based on direct full-optical recording and controlled stimulation of neuronal activity in different subjects. To pursue this challenging objective, we propose to develop optical technologies well beyond the state of the art for simultaneous neuronal “reading” and “writing” across large volumes and with high spatial and temporal resolution, targeted to the transfer of advantageous behaviour in physiological and pathological conditions.
We will perform whole-brain high-resolution imaging in zebrafish larvae to disentangle the activity patterns related to different tasks. We will then use these patterns as stimulation templates in other larvae to investigate spatio-temporal subject-invariant signatures of specific behavioural states. This ‘pump and probe’ strategy will allow gaining deep insights into the complex relationship between neuronal activity and subject behaviour.
To move towards clinics-oriented studies on brain stimulation therapies, we will complement whole-brain experiments in zebrafish with large area functional imaging and optostimulation in mammals. We will investigate all-optical brain-to-brain information transfer to boost an advantageous behaviour, i.e. motor recovery, in a mouse model of stroke. Mice showing more effective responses to rehabilitation will provide neuronal activity templates to be elicited in other animals, in order to increase rehabilitation efficiency.
We strongly believe that the implementation of new technologies for all-optical transfer of behaviour between different subjects will offer unprecedented views of neuronal activity in healthy and injured brain, paving the way to more effective brain stimulation therapies.
Summary
Exchange of information between different brains usually takes place through the interaction between bodies and the external environment. The ultimate goal of this project is to establish a novel paradigm of brain-to-brain communication based on direct full-optical recording and controlled stimulation of neuronal activity in different subjects. To pursue this challenging objective, we propose to develop optical technologies well beyond the state of the art for simultaneous neuronal “reading” and “writing” across large volumes and with high spatial and temporal resolution, targeted to the transfer of advantageous behaviour in physiological and pathological conditions.
We will perform whole-brain high-resolution imaging in zebrafish larvae to disentangle the activity patterns related to different tasks. We will then use these patterns as stimulation templates in other larvae to investigate spatio-temporal subject-invariant signatures of specific behavioural states. This ‘pump and probe’ strategy will allow gaining deep insights into the complex relationship between neuronal activity and subject behaviour.
To move towards clinics-oriented studies on brain stimulation therapies, we will complement whole-brain experiments in zebrafish with large area functional imaging and optostimulation in mammals. We will investigate all-optical brain-to-brain information transfer to boost an advantageous behaviour, i.e. motor recovery, in a mouse model of stroke. Mice showing more effective responses to rehabilitation will provide neuronal activity templates to be elicited in other animals, in order to increase rehabilitation efficiency.
We strongly believe that the implementation of new technologies for all-optical transfer of behaviour between different subjects will offer unprecedented views of neuronal activity in healthy and injured brain, paving the way to more effective brain stimulation therapies.
Max ERC Funding
2 370 250 €
Duration
Start date: 2016-12-01, End date: 2022-05-31
Project acronym CC-TOP
Project Cryosphere-Carbon on Top of the Earth (CC-Top):Decreasing Uncertainties of Thawing Permafrost and Collapsing Methane Hydrates in the Arctic
Researcher (PI) oerjan GUSTAFSSON
Host Institution (HI) STOCKHOLMS UNIVERSITET
Country Sweden
Call Details Advanced Grant (AdG), PE10, ERC-2015-AdG
Summary The enormous quantities of frozen carbon in the Arctic, held in shallow soils and sediments, act as “capacitors” of the global carbon system. Thawing permafrost (PF) and collapsing methane hydrates are top candidates to cause a net transfer of carbon from land/ocean to the atmosphere this century, yet uncertainties abound.
Our program targets the East Siberian Arctic Ocean (ESAO), the World’s largest shelf sea, as it holds 80% of coastal PF, 80% of subsea PF and 75% of shallow hydrates. Our initial findings (e.g., Science, 2010; Nature, 2012; PNAS; 2013; Nature Geoscience, 2013, 2014) are challenging earlier notions by showing complexities in terrestrial PF-Carbon remobilization and extensive venting of methane from subsea PF/hydrates. The objective of the CC-Top Program is to transform descriptive and data-lean pictures into quantitative understanding of the CC system, to pin down the present and predict future releases from these “Sleeping Giants” of the global carbon system.
The CC-Top program combines unique Arctic field capacities with powerful molecular-isotopic characterization of PF-carbon/methane to break through on:
The “awakening” of terrestrial PF-C pools: CC-Top will employ great pan-arctic rivers as natural integrators and by probing the δ13C/Δ14C and molecular fingerprints, apportion release fluxes of different PF-C pools.
The ESAO subsea cryosphere/methane: CC-Top will use recent spatially-extensive observations, deep sediment cores and gap-filling expeditions to (i) estimate distribution of subsea PF and hydrates; (ii) establish thermal state (thawing rate) of subsea PF-C; (iii) apportion sources of releasing methane btw subsea-PF, shallow hydrates vs seepage from the deep petroleum megapool using source-diagnostic triple-isotope fingerprinting.
Arctic Ocean slope hydrates: CC-Top will investigate sites (discovered by us 2008-2014) of collapsed hydrates venting methane, to characterize geospatial distribution and causes of destabilization.
Summary
The enormous quantities of frozen carbon in the Arctic, held in shallow soils and sediments, act as “capacitors” of the global carbon system. Thawing permafrost (PF) and collapsing methane hydrates are top candidates to cause a net transfer of carbon from land/ocean to the atmosphere this century, yet uncertainties abound.
Our program targets the East Siberian Arctic Ocean (ESAO), the World’s largest shelf sea, as it holds 80% of coastal PF, 80% of subsea PF and 75% of shallow hydrates. Our initial findings (e.g., Science, 2010; Nature, 2012; PNAS; 2013; Nature Geoscience, 2013, 2014) are challenging earlier notions by showing complexities in terrestrial PF-Carbon remobilization and extensive venting of methane from subsea PF/hydrates. The objective of the CC-Top Program is to transform descriptive and data-lean pictures into quantitative understanding of the CC system, to pin down the present and predict future releases from these “Sleeping Giants” of the global carbon system.
The CC-Top program combines unique Arctic field capacities with powerful molecular-isotopic characterization of PF-carbon/methane to break through on:
The “awakening” of terrestrial PF-C pools: CC-Top will employ great pan-arctic rivers as natural integrators and by probing the δ13C/Δ14C and molecular fingerprints, apportion release fluxes of different PF-C pools.
The ESAO subsea cryosphere/methane: CC-Top will use recent spatially-extensive observations, deep sediment cores and gap-filling expeditions to (i) estimate distribution of subsea PF and hydrates; (ii) establish thermal state (thawing rate) of subsea PF-C; (iii) apportion sources of releasing methane btw subsea-PF, shallow hydrates vs seepage from the deep petroleum megapool using source-diagnostic triple-isotope fingerprinting.
Arctic Ocean slope hydrates: CC-Top will investigate sites (discovered by us 2008-2014) of collapsed hydrates venting methane, to characterize geospatial distribution and causes of destabilization.
Max ERC Funding
2 499 756 €
Duration
Start date: 2016-11-01, End date: 2021-10-31
Project acronym DYCON
Project Dynamic Control and Numerics of Partial Differential Equations
Researcher (PI) Enrique Zuazua
Host Institution (HI) FUNDACION DEUSTO
Country Spain
Call Details Advanced Grant (AdG), PE1, ERC-2015-AdG
Summary This project aims at making a breakthrough contribution in the broad area of Control of Partial Differential Equations (PDE) and their numerical approximation methods by addressing key unsolved issues appearing systematically in real-life applications.
To this end, we pursue three objectives: 1) to contribute with new key theoretical methods and results, 2) to develop the corresponding numerical tools, and 3) to build up new computational software, the DYCON-COMP computational platform, thereby bridging the gap to applications.
The field of PDEs, together with numerical approximation and simulation methods and control theory, have evolved significantly in the last decades in a cross-fertilization process, to address the challenging demands of industrial and cross-disciplinary applications such as, for instance, the management of natural resources, meteorology, aeronautics, oil industry, biomedicine, human and animal collective behaviour, etc. Despite these efforts, some of the key issues still remain unsolved, either because of a lack of analytical understanding, of the absence of efficient numerical solvers, or of a combination of both.
This project identifies and focuses on six key topics that play a central role in most of the processes arising in applications, but which are still poorly understood: control of parameter dependent problems; long time horizon control; control under constraints; inverse design of time-irreversible models; memory models and hybrid PDE/ODE models, and finite versus infinite-dimensional dynamical systems.
These topics cannot be handled by superposing the state of the art in the various disciplines, due to the unexpected interactive phenomena that may emerge, for instance, in the fine numerical approximation of control problems. The coordinated and focused effort that we aim at developing is timely and much needed in order to solve these issues and bridge the gap from modelling to control, computer simulations and applications.
Summary
This project aims at making a breakthrough contribution in the broad area of Control of Partial Differential Equations (PDE) and their numerical approximation methods by addressing key unsolved issues appearing systematically in real-life applications.
To this end, we pursue three objectives: 1) to contribute with new key theoretical methods and results, 2) to develop the corresponding numerical tools, and 3) to build up new computational software, the DYCON-COMP computational platform, thereby bridging the gap to applications.
The field of PDEs, together with numerical approximation and simulation methods and control theory, have evolved significantly in the last decades in a cross-fertilization process, to address the challenging demands of industrial and cross-disciplinary applications such as, for instance, the management of natural resources, meteorology, aeronautics, oil industry, biomedicine, human and animal collective behaviour, etc. Despite these efforts, some of the key issues still remain unsolved, either because of a lack of analytical understanding, of the absence of efficient numerical solvers, or of a combination of both.
This project identifies and focuses on six key topics that play a central role in most of the processes arising in applications, but which are still poorly understood: control of parameter dependent problems; long time horizon control; control under constraints; inverse design of time-irreversible models; memory models and hybrid PDE/ODE models, and finite versus infinite-dimensional dynamical systems.
These topics cannot be handled by superposing the state of the art in the various disciplines, due to the unexpected interactive phenomena that may emerge, for instance, in the fine numerical approximation of control problems. The coordinated and focused effort that we aim at developing is timely and much needed in order to solve these issues and bridge the gap from modelling to control, computer simulations and applications.
Max ERC Funding
2 065 125 €
Duration
Start date: 2016-10-01, End date: 2022-09-30
Project acronym EYEGET
Project Gene therapy of inherited retinal diseases
Researcher (PI) Alberto AURICCHIO
Host Institution (HI) FONDAZIONE TELETHON
Country Italy
Call Details Advanced Grant (AdG), LS7, ERC-2015-AdG
Summary Inherited retinal degenerations (IRDs) are a major cause of blindness worldwide. IRD patients witness inexorable progressive vision loss as no therapy is currently available. In the last decade my group has significantly contributed to a change of this scenario by developing efficient adeno-associated viral (AAV) vectors for retinal gene therapy that are safe and effective in humans. The objective of EYEGET (EYE GEne Therapy) is to overcome some of the current major limitations in the field of retinal gene therapy to expand initial therapeutic successes to a larger number of IRDs. To achieve this, we propose to use four parallel, highly innovative and complementary approaches: i. expansion of the limited AAV cargo capacity by a novel methodology based on co-administration of multiple AAVs that reassemble in target retinal cells and reconstitute large genes; ii. targeting of frequent dominant gain-of-function mutations that cause RP using state-of-the-art AAV-mediated genome editing technologies; iii. induction of retinal cells clearance of toxic IRD products by AAV-mediated activation of autophagy and lysosomal function; iv. development of methodologies to directly convert fibroblasts to photoreceptors that can be transplanted in retinas from IRD patients with advanced PR loss and for whom in vivo gene therapy is no longer an option. We will use a combination of in vitro and in vivo state-of-the-art technologies including novel AAV vector design, high content screening of drugs that enhance AAV transduction, genome editing, and advanced in vivo retinal phenotyping to obtain proof-of-concept for each of these therapeutic strategies. The results from this study may impact the quality of life of millions of people worldwide by providing a cure based on gene and/or cell therapy for a large group of IRDs.
Summary
Inherited retinal degenerations (IRDs) are a major cause of blindness worldwide. IRD patients witness inexorable progressive vision loss as no therapy is currently available. In the last decade my group has significantly contributed to a change of this scenario by developing efficient adeno-associated viral (AAV) vectors for retinal gene therapy that are safe and effective in humans. The objective of EYEGET (EYE GEne Therapy) is to overcome some of the current major limitations in the field of retinal gene therapy to expand initial therapeutic successes to a larger number of IRDs. To achieve this, we propose to use four parallel, highly innovative and complementary approaches: i. expansion of the limited AAV cargo capacity by a novel methodology based on co-administration of multiple AAVs that reassemble in target retinal cells and reconstitute large genes; ii. targeting of frequent dominant gain-of-function mutations that cause RP using state-of-the-art AAV-mediated genome editing technologies; iii. induction of retinal cells clearance of toxic IRD products by AAV-mediated activation of autophagy and lysosomal function; iv. development of methodologies to directly convert fibroblasts to photoreceptors that can be transplanted in retinas from IRD patients with advanced PR loss and for whom in vivo gene therapy is no longer an option. We will use a combination of in vitro and in vivo state-of-the-art technologies including novel AAV vector design, high content screening of drugs that enhance AAV transduction, genome editing, and advanced in vivo retinal phenotyping to obtain proof-of-concept for each of these therapeutic strategies. The results from this study may impact the quality of life of millions of people worldwide by providing a cure based on gene and/or cell therapy for a large group of IRDs.
Max ERC Funding
2 499 564 €
Duration
Start date: 2017-01-01, End date: 2022-12-31
Project acronym FIRSTORM
Project Modeling first-order Mott transitions
Researcher (PI) Michele FABRIZIO
Host Institution (HI) SCUOLA INTERNAZIONALE SUPERIORE DI STUDI AVANZATI DI TRIESTE
Country Italy
Call Details Advanced Grant (AdG), PE3, ERC-2015-AdG
Summary Mott insulators are “unsuccessful metals”, where conduction is impeded by strong Coulomb repulsion. Their use in microelectronics started to be seriously considered in the 1990s, when first reports of field-effect switches appeared. These attempts were motivated by the expectation that the dielectric breakdown in Mott insulators could suddenly release all formerly localized carriers, a significant potential for nanometer scaling. Over the very last years striking experimental data on narrow-gap Mott insulators have finally materialized that expectation disclosing an unprecedented scenario where the metal phase actually stabilized was only metastable at equilibrium, which foreshadows exciting potential applications. These new data call for an urgent theoretical understanding so far missing. In fact, the conventional portrait of Mott insulators has overlooked that Mott transitions are mostly 1st order, implying an extended insulator-metal coexistence. As a result, bias or light may nucleate long-lived metastable metal droplets within the stable insulator, as indeed seen in experiments. The unexpected 1st order nature of dielectric breakdown in Mott insulators and its poorly explored but important conceptual and practical consequences are the scope of my theoretical project. I will model known Mott insulators identifying the variety of mechanisms (Coulomb, lattice distortions) that support and boost the 1st order character of the Mott transition. I will model and study insulator-metal coexistence and associated novel phenomena such as those related to nucleation and wetting at the interface, including possible unexplored role of quantum fluctuations. I will then simulate in model calculations the spatially inhomogeneous dynamics and non-equilibrium pathways across the 1st order Mott transition, relating the results to ongoing experiments in top groups. The outcome of this project is expected to yield immediate conceptual as well as later technological consequences.
Summary
Mott insulators are “unsuccessful metals”, where conduction is impeded by strong Coulomb repulsion. Their use in microelectronics started to be seriously considered in the 1990s, when first reports of field-effect switches appeared. These attempts were motivated by the expectation that the dielectric breakdown in Mott insulators could suddenly release all formerly localized carriers, a significant potential for nanometer scaling. Over the very last years striking experimental data on narrow-gap Mott insulators have finally materialized that expectation disclosing an unprecedented scenario where the metal phase actually stabilized was only metastable at equilibrium, which foreshadows exciting potential applications. These new data call for an urgent theoretical understanding so far missing. In fact, the conventional portrait of Mott insulators has overlooked that Mott transitions are mostly 1st order, implying an extended insulator-metal coexistence. As a result, bias or light may nucleate long-lived metastable metal droplets within the stable insulator, as indeed seen in experiments. The unexpected 1st order nature of dielectric breakdown in Mott insulators and its poorly explored but important conceptual and practical consequences are the scope of my theoretical project. I will model known Mott insulators identifying the variety of mechanisms (Coulomb, lattice distortions) that support and boost the 1st order character of the Mott transition. I will model and study insulator-metal coexistence and associated novel phenomena such as those related to nucleation and wetting at the interface, including possible unexplored role of quantum fluctuations. I will then simulate in model calculations the spatially inhomogeneous dynamics and non-equilibrium pathways across the 1st order Mott transition, relating the results to ongoing experiments in top groups. The outcome of this project is expected to yield immediate conceptual as well as later technological consequences.
Max ERC Funding
1 422 684 €
Duration
Start date: 2016-09-01, End date: 2022-02-28
Project acronym GeCo
Project Data-Driven Genomic Computing
Researcher (PI) stefano CERI
Host Institution (HI) POLITECNICO DI MILANO
Country Italy
Call Details Advanced Grant (AdG), PE6, ERC-2015-AdG
Summary Next-generation sequencing technology has dramatically reduced the cost and time of reading the DNA. Huge investments are targeted to sequencing the DNA of large populations, and repositories of well-curated sequence data are being collected. Answers to fundamental biomedical problems are hidden in these data, e.g. how cancer arises, how driving mutations occur, how much cancer is dependent on environment. But genomic computing has not comparatively evolved. Bioinformatics has been driven by specific needs and distracted from a foundational approach; hundreds of methods solve individual problems, but miss the broad perspective.
The objective of GeCo is to rethink genomic computing through the lens of basic data management. We will first design the data model, using few general abstractions that guarantee interoperability between existing data formats. Next, we will design a new-generation query language inspired by classic relational algebra and extended with orthogonal, domain-specific abstractions for genomics. Query processing will trace metadata and computation steps, opening doors to the seamless integration of descriptive statistics and high-level data analysis (e.g., DNA region clustering and extraction of regulatory networks).
Genomic computing is a “big data” problem, therefore we will also achieve computational efficiency by using parallel computing on both clusters and public clouds; the choice of a suitable data model and of computational abstractions will boost performance in a principled way. The resulting technology will be applicable to individual and federated repositories, and will be exploited for providing integrated access to curated data, made available by large consortia, through user-friendly search services. Our most far-fetching vision is to move towards an Internet of Genomes exploiting data indexing and crawling. The PI’s background in distributed data, data modelling, query processing and search will drive a radical paradigm shift.
Summary
Next-generation sequencing technology has dramatically reduced the cost and time of reading the DNA. Huge investments are targeted to sequencing the DNA of large populations, and repositories of well-curated sequence data are being collected. Answers to fundamental biomedical problems are hidden in these data, e.g. how cancer arises, how driving mutations occur, how much cancer is dependent on environment. But genomic computing has not comparatively evolved. Bioinformatics has been driven by specific needs and distracted from a foundational approach; hundreds of methods solve individual problems, but miss the broad perspective.
The objective of GeCo is to rethink genomic computing through the lens of basic data management. We will first design the data model, using few general abstractions that guarantee interoperability between existing data formats. Next, we will design a new-generation query language inspired by classic relational algebra and extended with orthogonal, domain-specific abstractions for genomics. Query processing will trace metadata and computation steps, opening doors to the seamless integration of descriptive statistics and high-level data analysis (e.g., DNA region clustering and extraction of regulatory networks).
Genomic computing is a “big data” problem, therefore we will also achieve computational efficiency by using parallel computing on both clusters and public clouds; the choice of a suitable data model and of computational abstractions will boost performance in a principled way. The resulting technology will be applicable to individual and federated repositories, and will be exploited for providing integrated access to curated data, made available by large consortia, through user-friendly search services. Our most far-fetching vision is to move towards an Internet of Genomes exploiting data indexing and crawling. The PI’s background in distributed data, data modelling, query processing and search will drive a radical paradigm shift.
Max ERC Funding
2 500 000 €
Duration
Start date: 2016-09-01, End date: 2021-08-31
Project acronym GravBHs
Project A New Strategy for Gravity and Black Holes
Researcher (PI) ROBERTO ALEJANDRO EMPARAN GARCIA DE SALAZAR
Host Institution (HI) UNIVERSITAT DE BARCELONA
Country Spain
Call Details Advanced Grant (AdG), PE2, ERC-2015-AdG
Summary General Relativity (GR) encompasses a huge variety of physical phenomena, from the collision of astrophysical black holes, to the dynamics (via holography) of strongly-coupled plasmas and the spontaneous symmetry-breaking in superconductors. Black holes play a central role in all this. However, their equations are exceedingly hard to solve. The apparent lack of a generic tunable parameter that allows to solve the theory perturbatively (like the electric coupling constant in electrodynamics, or the rank of the gauge group in large-N Yang-Mills theory) is arguably the single most important obstacle for generic efficient approaches to the physics of strong gravity and black holes. I argue that one natural parameter suggests itself: GR can be defined in an arbitrary number of dimensions D. Recently I have demonstrated that the limit of large D is optimally tailored for the investigation of black holes, classical and potentially also quantum. Explicit preliminary studies have proved that the concept is sound, powerful, and applicable even in four dimensions.
This encourages the pursuit of a full-scale program with two major goals:
(A) Reformulating GR and Black Hole physics around the large-D limit in terms of an effective membrane theory of black holes, coupled (non-perturbatively in 1/D) to an effective theory for gravitational radiation.
(B) Resolution of outstanding problems in gravitational physics, in particular of problems of direct relevance to cosmic censorship (critical collapse, endpoint of black brane instabilities), and of the quantum theory of black holes.
With the new tools of (A), a large number of additional problems in black hole physics and in holographic duality can be solved, which guarantee very substantial fallback objectives. These include black hole collisions, black hole phase diagrams, instabilities, holographic dynamics of finite-temperature systems, and potentially any problem that can be formulated in an arbitrary number of dimensions.
Summary
General Relativity (GR) encompasses a huge variety of physical phenomena, from the collision of astrophysical black holes, to the dynamics (via holography) of strongly-coupled plasmas and the spontaneous symmetry-breaking in superconductors. Black holes play a central role in all this. However, their equations are exceedingly hard to solve. The apparent lack of a generic tunable parameter that allows to solve the theory perturbatively (like the electric coupling constant in electrodynamics, or the rank of the gauge group in large-N Yang-Mills theory) is arguably the single most important obstacle for generic efficient approaches to the physics of strong gravity and black holes. I argue that one natural parameter suggests itself: GR can be defined in an arbitrary number of dimensions D. Recently I have demonstrated that the limit of large D is optimally tailored for the investigation of black holes, classical and potentially also quantum. Explicit preliminary studies have proved that the concept is sound, powerful, and applicable even in four dimensions.
This encourages the pursuit of a full-scale program with two major goals:
(A) Reformulating GR and Black Hole physics around the large-D limit in terms of an effective membrane theory of black holes, coupled (non-perturbatively in 1/D) to an effective theory for gravitational radiation.
(B) Resolution of outstanding problems in gravitational physics, in particular of problems of direct relevance to cosmic censorship (critical collapse, endpoint of black brane instabilities), and of the quantum theory of black holes.
With the new tools of (A), a large number of additional problems in black hole physics and in holographic duality can be solved, which guarantee very substantial fallback objectives. These include black hole collisions, black hole phase diagrams, instabilities, holographic dynamics of finite-temperature systems, and potentially any problem that can be formulated in an arbitrary number of dimensions.
Max ERC Funding
2 138 825 €
Duration
Start date: 2016-10-01, End date: 2021-09-30
Project acronym INTENT
Project Structured Reactors with INTensified ENergy Transfer for Breakthrough Catalytic Technologies
Researcher (PI) Enrico TRONCONI
Host Institution (HI) POLITECNICO DI MILANO
Country Italy
Call Details Advanced Grant (AdG), PE8, ERC-2015-AdG
Summary Critically important heterogeneous catalytic reactions for energy conversion and chemicals production have been run for several decades in fixed bed reactors randomly packed with catalyst pellets, whose operation is intrinsically limited by slow heat removal/supply. There is urgent need for a new generation of process equipment and chemical reactors to address the current quest for process intensification. I propose that a game-changing alternative is provided by structured reactors wherein the catalyst is washcoated onto or packed into structured substrates, like honeycomb monoliths, open-cell foams or other cellular materials, fabricated with highly conductive metallic (Al, Cu) materials. The goal of this project is to fully elucidate fundamental and engineering properties of such novel conductive structured catalysts, investigate new concepts for their design, manufacturing, catalytic activation and operation (e.g. 3D printing, packed foams, energy supply by solar irradiation), and demonstrate their potential for a quantum leap in the intensification of three crucial catalytic processes for the production of energy vectors: i) distributed H2 generation via efficient small-size reformers; ii) conversion of syngas to clean synthetic fuels in compact (e.g. skid-mounted) reactors; iii) production of solar H2. To this purpose I will combine advanced CFD modelling with lab-scale experimentation in order to identify the optimal structure-performance relation of existing and novel substrates, use such new knowledge to design optimized prototypes, apply unconventional additive manufacturing technologies for their production, and construct a semi-industrial tubular pilot reactor to test them at a representative scale. The project results will enable novel reactor designs based on tuning geometry, materials and configurations of the conductive internals to match the activity - selectivity demands of specific process applications, while impacting also other research areas.
Summary
Critically important heterogeneous catalytic reactions for energy conversion and chemicals production have been run for several decades in fixed bed reactors randomly packed with catalyst pellets, whose operation is intrinsically limited by slow heat removal/supply. There is urgent need for a new generation of process equipment and chemical reactors to address the current quest for process intensification. I propose that a game-changing alternative is provided by structured reactors wherein the catalyst is washcoated onto or packed into structured substrates, like honeycomb monoliths, open-cell foams or other cellular materials, fabricated with highly conductive metallic (Al, Cu) materials. The goal of this project is to fully elucidate fundamental and engineering properties of such novel conductive structured catalysts, investigate new concepts for their design, manufacturing, catalytic activation and operation (e.g. 3D printing, packed foams, energy supply by solar irradiation), and demonstrate their potential for a quantum leap in the intensification of three crucial catalytic processes for the production of energy vectors: i) distributed H2 generation via efficient small-size reformers; ii) conversion of syngas to clean synthetic fuels in compact (e.g. skid-mounted) reactors; iii) production of solar H2. To this purpose I will combine advanced CFD modelling with lab-scale experimentation in order to identify the optimal structure-performance relation of existing and novel substrates, use such new knowledge to design optimized prototypes, apply unconventional additive manufacturing technologies for their production, and construct a semi-industrial tubular pilot reactor to test them at a representative scale. The project results will enable novel reactor designs based on tuning geometry, materials and configurations of the conductive internals to match the activity - selectivity demands of specific process applications, while impacting also other research areas.
Max ERC Funding
2 484 648 €
Duration
Start date: 2016-11-01, End date: 2022-04-30
Project acronym LEAPS
Project Light effected autonomous molecular pumps: Towards active transporters and actuating materials
Researcher (PI) Alberto Credi
Host Institution (HI) ALMA MATER STUDIORUM - UNIVERSITA DI BOLOGNA
Country Italy
Call Details Advanced Grant (AdG), PE5, ERC-2015-AdG
Summary The crucial role played by molecular motors in major biological processes gives a clue on the potential of these nanoscale devices for technology. Their exploitation depends on our ability to build working and robust artificial systems, and to interface them with their environment or other molecular constructs for using the motion to carry out tasks.
The goal of this project is to develop the first synthetic photochemical supramolecular pumps and to apply them for performing nanoscale transport functions and macroscopic actuation. The motor modules, which rely on a functioning and affordable minimalist design based on first principles and threaded topologies, operate autonomously away from equilibrium by using light as a clean energy source, can be switched on/off chemically, and are easy to make and functionalize. Appropriately designed motors will be embedded in the bilayer of vesicles to pump molecules across physically separated places, thereby photogenerating concentration gradients. In parallel we plan to arrange the pump modules in oligomeric tracks and investigate the autonomous, directional and processive displacement of a molecule over a few nm. These linear motors will be equipped with a cargo that can be loaded/unloaded with control, yielding the first man-made molecular transporters. Finally, we will integrate the pump components in polymeric scaffolds such that the photoinduced operation of the motors produces a non-equilibrium entanglement of the polymer chains, that can be eventually unravelled by chemical stimulation. Such materials may be used to convert, store, and reuse the energy of (sun)light upon demand.
All the above functionalities are unprecedented for wholly synthetic chemical structures. Their demonstration would be a landmark result in supramolecular chemistry and nanoscience, and open up radically new directions for nanotechnology, nanomedicine, and energy conversion.
Summary
The crucial role played by molecular motors in major biological processes gives a clue on the potential of these nanoscale devices for technology. Their exploitation depends on our ability to build working and robust artificial systems, and to interface them with their environment or other molecular constructs for using the motion to carry out tasks.
The goal of this project is to develop the first synthetic photochemical supramolecular pumps and to apply them for performing nanoscale transport functions and macroscopic actuation. The motor modules, which rely on a functioning and affordable minimalist design based on first principles and threaded topologies, operate autonomously away from equilibrium by using light as a clean energy source, can be switched on/off chemically, and are easy to make and functionalize. Appropriately designed motors will be embedded in the bilayer of vesicles to pump molecules across physically separated places, thereby photogenerating concentration gradients. In parallel we plan to arrange the pump modules in oligomeric tracks and investigate the autonomous, directional and processive displacement of a molecule over a few nm. These linear motors will be equipped with a cargo that can be loaded/unloaded with control, yielding the first man-made molecular transporters. Finally, we will integrate the pump components in polymeric scaffolds such that the photoinduced operation of the motors produces a non-equilibrium entanglement of the polymer chains, that can be eventually unravelled by chemical stimulation. Such materials may be used to convert, store, and reuse the energy of (sun)light upon demand.
All the above functionalities are unprecedented for wholly synthetic chemical structures. Their demonstration would be a landmark result in supramolecular chemistry and nanoscience, and open up radically new directions for nanotechnology, nanomedicine, and energy conversion.
Max ERC Funding
2 362 950 €
Duration
Start date: 2016-10-01, End date: 2022-09-30