Project acronym 0MSPIN
Project Spintronics based on relativistic phenomena in systems with zero magnetic moment
Researcher (PI) Tomáš Jungwirth
Host Institution (HI) FYZIKALNI USTAV AV CR V.V.I
Call Details Advanced Grant (AdG), PE3, ERC-2010-AdG_20100224
Summary The 0MSPIN project consists of an extensive integrated theoretical, experimental and device development programme of research opening a radical new approach to spintronics. Spintronics has the potential to supersede existing storage and memory applications, and to provide alternatives to current CMOS technology. Ferromagnetic matels used in all current spintronics applications may make it impractical to realise the full potential of spintronics. Metals are unsuitable for transistor and information processing applications, for opto-electronics, or for high-density integration. The 0MSPIN project aims to remove the major road-block holding back the development of spintronics in a radical way: removing the ferromagnetic component from key active parts or from the whole of the spintronic devices. This approach is based on exploiting the combination of exchange and spin-orbit coupling phenomena and material systems with zero macroscopic moment. The goal of the 0MSPIN is to provide a new paradigm by which spintronics can enter the realms of conventional semiconductors in both fundamental condensed matter research and in information technologies. In the central part of the proposal, the research towards this goal is embedded within a materials science project whose aim is to introduce into physics and microelectronics an entirely new class of semiconductors. 0MSPIN seeks to exploit three classes of material systems: (1) Antiferromagnetic bi-metallic 3d-5d alloys (e.g. Mn2Au). (2) Antiferromagnetic I-II-V semiconductors (e.g. LiMnAs). (3) Non-magnetic spin-orbit coupled semiconductors with injected spin-polarized currents (e.g. 2D III-V structures). Proof of concept devices operating at high temperatures will be fabricated to show-case new functionalities offered by zero-moment systems for sensing and memory applications, information processing, and opto-electronics technologies.
Summary
The 0MSPIN project consists of an extensive integrated theoretical, experimental and device development programme of research opening a radical new approach to spintronics. Spintronics has the potential to supersede existing storage and memory applications, and to provide alternatives to current CMOS technology. Ferromagnetic matels used in all current spintronics applications may make it impractical to realise the full potential of spintronics. Metals are unsuitable for transistor and information processing applications, for opto-electronics, or for high-density integration. The 0MSPIN project aims to remove the major road-block holding back the development of spintronics in a radical way: removing the ferromagnetic component from key active parts or from the whole of the spintronic devices. This approach is based on exploiting the combination of exchange and spin-orbit coupling phenomena and material systems with zero macroscopic moment. The goal of the 0MSPIN is to provide a new paradigm by which spintronics can enter the realms of conventional semiconductors in both fundamental condensed matter research and in information technologies. In the central part of the proposal, the research towards this goal is embedded within a materials science project whose aim is to introduce into physics and microelectronics an entirely new class of semiconductors. 0MSPIN seeks to exploit three classes of material systems: (1) Antiferromagnetic bi-metallic 3d-5d alloys (e.g. Mn2Au). (2) Antiferromagnetic I-II-V semiconductors (e.g. LiMnAs). (3) Non-magnetic spin-orbit coupled semiconductors with injected spin-polarized currents (e.g. 2D III-V structures). Proof of concept devices operating at high temperatures will be fabricated to show-case new functionalities offered by zero-moment systems for sensing and memory applications, information processing, and opto-electronics technologies.
Max ERC Funding
1 938 000 €
Duration
Start date: 2011-06-01, End date: 2016-05-31
Project acronym 20SInhibitor
Project Selective 20S proteasome inhibition for multiple myeloma therapy
Researcher (PI) Michal SHARON
Host Institution (HI) WEIZMANN INSTITUTE OF SCIENCE
Call Details Proof of Concept (PoC), ERC-2018-PoC
Summary Multiple myeloma (MM) is a cancer of plasma cells, that is incurable, and the second most common form of blood cancer. Proteasome inhibitors (PIs) are considered a mainstay in the treatment of MM and mantle cell lymphoma (MCL). Current drugs, based on PIs however, target the chymotrypsin-like activity of the 20S proteasome, and inhibit the activities of both the 20S and 26S proteasomes. Thus, it is possible that selective drug intervention specifically inhibiting only the 20S proteasomes will reduce toxicity, and minimize the deleterious side effects of the current therapeutic regimens.
Our preliminary work revealed a family of 20S proteasome inhibitors, which we termed Catalytic Core Regulators (CCRs) that selectively target the 20S proteasome rather than the 26S complex. Based on sequence motif and structural elements of the CCRs we have designed an artificial protein that is capable of inhibiting the 20S proteasome. We anticipate that these findings will lead to the design of synthetic proteins, peptides or peptidomimetic compounds targeting cancer cells more specifically. This specificity will pose the compounds in an attractive light for using them in various therapeutic applications.
What is exciting from the commercialization perspective, is that pharmaceutical research has switched to revisit the use of peptides as therapeutics. Pharmaceutical companies have seen the development of peptides as a promising direction to lower their risk position. Overall, peptide therapeutics have a 20% chance of receiving regulatory approval, a probability that is 50% higher than that for the approval of small molecules, which form the basis of so called traditional drugs.
In the project, we will carry out actions, which will equip us with the sufficient IP protection strategy, business strategy, industry networks and initial contacts for taking the innovation out from the laboratory to next phase in developing therapy first for MM and MCL later on.
Summary
Multiple myeloma (MM) is a cancer of plasma cells, that is incurable, and the second most common form of blood cancer. Proteasome inhibitors (PIs) are considered a mainstay in the treatment of MM and mantle cell lymphoma (MCL). Current drugs, based on PIs however, target the chymotrypsin-like activity of the 20S proteasome, and inhibit the activities of both the 20S and 26S proteasomes. Thus, it is possible that selective drug intervention specifically inhibiting only the 20S proteasomes will reduce toxicity, and minimize the deleterious side effects of the current therapeutic regimens.
Our preliminary work revealed a family of 20S proteasome inhibitors, which we termed Catalytic Core Regulators (CCRs) that selectively target the 20S proteasome rather than the 26S complex. Based on sequence motif and structural elements of the CCRs we have designed an artificial protein that is capable of inhibiting the 20S proteasome. We anticipate that these findings will lead to the design of synthetic proteins, peptides or peptidomimetic compounds targeting cancer cells more specifically. This specificity will pose the compounds in an attractive light for using them in various therapeutic applications.
What is exciting from the commercialization perspective, is that pharmaceutical research has switched to revisit the use of peptides as therapeutics. Pharmaceutical companies have seen the development of peptides as a promising direction to lower their risk position. Overall, peptide therapeutics have a 20% chance of receiving regulatory approval, a probability that is 50% higher than that for the approval of small molecules, which form the basis of so called traditional drugs.
In the project, we will carry out actions, which will equip us with the sufficient IP protection strategy, business strategy, industry networks and initial contacts for taking the innovation out from the laboratory to next phase in developing therapy first for MM and MCL later on.
Max ERC Funding
150 000 €
Duration
Start date: 2019-04-01, End date: 2020-09-30
Project acronym 2D-4-CO2
Project DESIGNING 2D NANOSHEETS FOR CO2 REDUCTION AND INTEGRATION INTO vdW HETEROSTRUCTURES FOR ARTIFICIAL PHOTOSYNTHESIS
Researcher (PI) Damien VOIRY
Host Institution (HI) CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
Call Details Starting Grant (StG), PE8, ERC-2018-STG
Summary CO2 reduction reaction (CO2RR) holds great promise for conversion of the green-house gas carbon dioxide into chemical fuels. The absence of catalytic materials demonstrating high performance and high selectivity currently hampers practical demonstration. CO2RR is also limited by the low solubility of CO2 in the electrolyte solution and therefore electrocatalytic reactions in gas phase using gas diffusion electrodes would be preferred. 2D materials have recently emerged as a novel class of electrocatalytic materials thanks to their rich structures and electronic properties. The synthesis of novel 2D catalysts and their implementation into photocatalytic systems would be a major step towards the development of devices for storing solar energy in the form of chemical fuels. With 2D-4-CO2, I propose to: 1) develop novel class of CO2RR catalysts based on conducting 2D nanosheets and 2) demonstrate photocatalytic conversion of CO2 into chemical fuels using structure engineered gas diffusion electrodes made of 2D conducting catalysts. To reach this goal, the first objective of 2D-4-CO2 is to provide guidelines for the development of novel cutting-edge 2D catalysts towards CO2 conversion into chemical fuel. This will be possible by using a multidisciplinary approach based on 2D materials engineering, advanced methods of characterization and novel designs of gas diffusion electrodes for the reduction of CO2 in gas phase. The second objective is to develop practical photocatalytic systems using van der Waals (vdW) heterostructures for the efficient conversion of CO2 into chemical fuels. vdW heterostructures will consist in rational designs of 2D materials and 2D-like materials deposited by atomic layer deposition in order to achieve highly efficient light conversion and prolonged stability. This project will not only enable a deeper understanding of the CO2RR but it will also provide practical strategies for large-scale application of CO2RR for solar fuel production.
Summary
CO2 reduction reaction (CO2RR) holds great promise for conversion of the green-house gas carbon dioxide into chemical fuels. The absence of catalytic materials demonstrating high performance and high selectivity currently hampers practical demonstration. CO2RR is also limited by the low solubility of CO2 in the electrolyte solution and therefore electrocatalytic reactions in gas phase using gas diffusion electrodes would be preferred. 2D materials have recently emerged as a novel class of electrocatalytic materials thanks to their rich structures and electronic properties. The synthesis of novel 2D catalysts and their implementation into photocatalytic systems would be a major step towards the development of devices for storing solar energy in the form of chemical fuels. With 2D-4-CO2, I propose to: 1) develop novel class of CO2RR catalysts based on conducting 2D nanosheets and 2) demonstrate photocatalytic conversion of CO2 into chemical fuels using structure engineered gas diffusion electrodes made of 2D conducting catalysts. To reach this goal, the first objective of 2D-4-CO2 is to provide guidelines for the development of novel cutting-edge 2D catalysts towards CO2 conversion into chemical fuel. This will be possible by using a multidisciplinary approach based on 2D materials engineering, advanced methods of characterization and novel designs of gas diffusion electrodes for the reduction of CO2 in gas phase. The second objective is to develop practical photocatalytic systems using van der Waals (vdW) heterostructures for the efficient conversion of CO2 into chemical fuels. vdW heterostructures will consist in rational designs of 2D materials and 2D-like materials deposited by atomic layer deposition in order to achieve highly efficient light conversion and prolonged stability. This project will not only enable a deeper understanding of the CO2RR but it will also provide practical strategies for large-scale application of CO2RR for solar fuel production.
Max ERC Funding
1 499 931 €
Duration
Start date: 2019-01-01, End date: 2023-12-31
Project acronym 2D-PnictoChem
Project Chemistry and Interface Control of Novel 2D-Pnictogen Nanomaterials
Researcher (PI) Gonzalo ABELLAN SAEZ
Host Institution (HI) UNIVERSITAT DE VALENCIA
Call Details Starting Grant (StG), PE5, ERC-2018-STG
Summary 2D-PnictoChem aims at exploring the Chemistry of a novel class of graphene-like 2D layered
elemental materials of group 15, the pnictogens: P, As, Sb, and Bi. In the last few years, these materials
have taken the field of Materials Science by storm since they can outperform and/or complement graphene
properties. Their strongly layer-dependent unique properties range from semiconducting to metallic,
including high carrier mobilities, tunable bandgaps, strong spin-orbit coupling or transparency. However,
the Chemistry of pnictogens is still in its infancy, remaining largely unexplored. This is the niche that
2D-PnictoChem aims to fill. By mastering the interface chemistry, we will develop the assembly of 2Dpnictogens
in complex hybrid heterostructures for the first time. Success will rely on a cross-disciplinary
approach combining both Inorganic- and Organic Chemistry with Solid-state Physics, including: 1)
Synthetizing and exfoliating high quality ultra-thin layer pnictogens, providing reliable access down to
the monolayer limit. 2) Achieving their chemical functionalization via both non-covalent and covalent
approaches in order to tailor at will their properties, decipher reactivity patterns and enable controlled
doping avenues. 3) Developing hybrid architectures through a precise chemical control of the interface,
in order to promote unprecedented access to novel heterostructures. 4) Exploring novel applications
concepts achieving outstanding performances. These are all priorities in the European Union agenda
aimed at securing an affordable, clean energy future by developing more efficient hybrid systems for
batteries, electronic devices or applications in catalysis. The opportunity is unique to reduce Europe’s
dependence on external technology and the PI’s background is ideally suited to tackle these objectives,
counting as well on a multidisciplinary team of international collaborators.
Summary
2D-PnictoChem aims at exploring the Chemistry of a novel class of graphene-like 2D layered
elemental materials of group 15, the pnictogens: P, As, Sb, and Bi. In the last few years, these materials
have taken the field of Materials Science by storm since they can outperform and/or complement graphene
properties. Their strongly layer-dependent unique properties range from semiconducting to metallic,
including high carrier mobilities, tunable bandgaps, strong spin-orbit coupling or transparency. However,
the Chemistry of pnictogens is still in its infancy, remaining largely unexplored. This is the niche that
2D-PnictoChem aims to fill. By mastering the interface chemistry, we will develop the assembly of 2Dpnictogens
in complex hybrid heterostructures for the first time. Success will rely on a cross-disciplinary
approach combining both Inorganic- and Organic Chemistry with Solid-state Physics, including: 1)
Synthetizing and exfoliating high quality ultra-thin layer pnictogens, providing reliable access down to
the monolayer limit. 2) Achieving their chemical functionalization via both non-covalent and covalent
approaches in order to tailor at will their properties, decipher reactivity patterns and enable controlled
doping avenues. 3) Developing hybrid architectures through a precise chemical control of the interface,
in order to promote unprecedented access to novel heterostructures. 4) Exploring novel applications
concepts achieving outstanding performances. These are all priorities in the European Union agenda
aimed at securing an affordable, clean energy future by developing more efficient hybrid systems for
batteries, electronic devices or applications in catalysis. The opportunity is unique to reduce Europe’s
dependence on external technology and the PI’s background is ideally suited to tackle these objectives,
counting as well on a multidisciplinary team of international collaborators.
Max ERC Funding
1 499 419 €
Duration
Start date: 2018-11-01, End date: 2023-10-31
Project acronym 2D4QT
Project 2D Materials for Quantum Technology
Researcher (PI) Christoph STAMPFER
Host Institution (HI) RHEINISCH-WESTFAELISCHE TECHNISCHE HOCHSCHULE AACHEN
Call Details Consolidator Grant (CoG), PE3, ERC-2018-COG
Summary Since its discovery, graphene has been indicated as a promising platform for quantum technologies (QT). The number of theoretical proposal dedicated to this vision has grown steadily, exploring a wide range of directions, ranging from spin and valley qubits, to topologically-protected states. The experimental confirmation of these ideas lagged so far significantly behind, mostly because of material quality problems. The quality of graphene-based devices has however improved dramatically in the past five years, thanks to the advent of the so-called van der Waals (vdW) heteostructures - artificial solids formed by mechanically stacking layers of different two dimensional (2D) materials, such as graphene, hexagonal boron nitride and transition metal dichalcogenides. These new advances open now finally the door to put several of those theoretical proposals to test.
The goal of this project is to assess experimentally the potential of graphene-based heterostructures for QT applications. Specifically, I will push the development of an advanced technological platform for vdW heterostructures, which will allow to give quantitative answers to the following open questions: i) what are the relaxation and coherence times of spin and valley qubits in isotopically purified bilayer graphene (BLG); ii) what is the efficiency of a Cooper-pair splitter based on BLG; and iii) what are the characteristic energy scales of topologically protected quantum states engineered in graphene-based heterostructures.
At the end of this project, I aim at being in the position of saying whether graphene is the horse-worth-betting-on predicted by theory, or whether it still hides surprises in terms of fundamental physics. The technological advancements developed in this project for integrating nanostructured layers into vdW heterostructures will reach even beyond this goal, opening the door to new research directions and possible applications.
Summary
Since its discovery, graphene has been indicated as a promising platform for quantum technologies (QT). The number of theoretical proposal dedicated to this vision has grown steadily, exploring a wide range of directions, ranging from spin and valley qubits, to topologically-protected states. The experimental confirmation of these ideas lagged so far significantly behind, mostly because of material quality problems. The quality of graphene-based devices has however improved dramatically in the past five years, thanks to the advent of the so-called van der Waals (vdW) heteostructures - artificial solids formed by mechanically stacking layers of different two dimensional (2D) materials, such as graphene, hexagonal boron nitride and transition metal dichalcogenides. These new advances open now finally the door to put several of those theoretical proposals to test.
The goal of this project is to assess experimentally the potential of graphene-based heterostructures for QT applications. Specifically, I will push the development of an advanced technological platform for vdW heterostructures, which will allow to give quantitative answers to the following open questions: i) what are the relaxation and coherence times of spin and valley qubits in isotopically purified bilayer graphene (BLG); ii) what is the efficiency of a Cooper-pair splitter based on BLG; and iii) what are the characteristic energy scales of topologically protected quantum states engineered in graphene-based heterostructures.
At the end of this project, I aim at being in the position of saying whether graphene is the horse-worth-betting-on predicted by theory, or whether it still hides surprises in terms of fundamental physics. The technological advancements developed in this project for integrating nanostructured layers into vdW heterostructures will reach even beyond this goal, opening the door to new research directions and possible applications.
Max ERC Funding
1 806 250 €
Duration
Start date: 2019-09-01, End date: 2024-08-31
Project acronym 2DTHERMS
Project Design of new thermoelectric devices based on layered and field modulated nanostructures of strongly correlated electron systems
Researcher (PI) Jose Francisco Rivadulla Fernandez
Host Institution (HI) UNIVERSIDAD DE SANTIAGO DE COMPOSTELA
Call Details Starting Grant (StG), PE3, ERC-2010-StG_20091028
Summary Design of new thermoelectric devices based on layered and field modulated nanostructures of strongly correlated electron systems
Summary
Design of new thermoelectric devices based on layered and field modulated nanostructures of strongly correlated electron systems
Max ERC Funding
1 427 190 €
Duration
Start date: 2010-11-01, End date: 2015-10-31
Project acronym 2shRNA
Project 2shRNA branched nanobinders as promising therapeutic tools for combined cancer therapy
Researcher (PI) Modesto Orozco López
Host Institution (HI) FUNDACIO INSTITUT DE RECERCA BIOMEDICA (IRB BARCELONA)
Call Details Proof of Concept (PoC), ERC-2018-PoC
Summary This project aims to optimize and validate a promising therapeutic tool for combined cancer therapy, 2shRNA, in an ex vivo model system.
Combined therapies are of great significance nowadays, due to their key role in fighting, for instances, resistance processes during cancer treatment. Nonetheless, the drug combinations approved to date face several problems, such as cooperative toxicity effects, lack of efficiency and poor bioavailability. We have designed and synthesized 2shRNA, a new bifunctional RNA tool that can simultaneously attack two therapeutic targets involved in drug resistance pathways, and that can additionally bind other molecules such as peptide carriers or fluorophores, to improve delivery and efficacy. The 2shRNA nanostructure displayed low toxicity and excellent anti-proliferative properties in resistant HER2+ breast cancer cell lines. The present proposal is aimed at optimizing and validating this novel and promising RNA tool by combining state-of-the-art bioinformatics design and cycles of chemical refinement with biological evaluation in PDx-derived primary cell cultures and biodistribution studies in PDx mouse models. The proposed strategy presents a novel therapeutic approach with great potential to circumvent drug resistance in breast cancer, which is a major health challenge for our society. The ability of our biostable RNA tool to administer two drugs in a single dose could improve the quality of life of the patients, as fewer doses might be needed to stall disease progression.
Summary
This project aims to optimize and validate a promising therapeutic tool for combined cancer therapy, 2shRNA, in an ex vivo model system.
Combined therapies are of great significance nowadays, due to their key role in fighting, for instances, resistance processes during cancer treatment. Nonetheless, the drug combinations approved to date face several problems, such as cooperative toxicity effects, lack of efficiency and poor bioavailability. We have designed and synthesized 2shRNA, a new bifunctional RNA tool that can simultaneously attack two therapeutic targets involved in drug resistance pathways, and that can additionally bind other molecules such as peptide carriers or fluorophores, to improve delivery and efficacy. The 2shRNA nanostructure displayed low toxicity and excellent anti-proliferative properties in resistant HER2+ breast cancer cell lines. The present proposal is aimed at optimizing and validating this novel and promising RNA tool by combining state-of-the-art bioinformatics design and cycles of chemical refinement with biological evaluation in PDx-derived primary cell cultures and biodistribution studies in PDx mouse models. The proposed strategy presents a novel therapeutic approach with great potential to circumvent drug resistance in breast cancer, which is a major health challenge for our society. The ability of our biostable RNA tool to administer two drugs in a single dose could improve the quality of life of the patients, as fewer doses might be needed to stall disease progression.
Max ERC Funding
150 000 €
Duration
Start date: 2019-01-01, End date: 2020-06-30
Project acronym 3-TOP
Project Exploring the physics of 3-dimensional topological insulators
Researcher (PI) Laurens Wigbolt Molenkamp
Host Institution (HI) JULIUS-MAXIMILIANS-UNIVERSITAT WURZBURG
Call Details Advanced Grant (AdG), PE3, ERC-2010-AdG_20100224
Summary Topological insulators constitute a novel class of materials where the topological details of the bulk band structure induce a robust surface state on the edges of the material. While transport data for 2-dimensional topological insulators have recently become available, experiments on their 3-dimensional counterparts are mainly limited to photoelectron spectroscopy. At the same time, a plethora of interesting novel physical phenomena have been predicted to occur in such systems.
In this proposal, we sketch an approach to tackle the transport and magnetic properties of the surface states in these materials. This starts with high quality layer growth, using molecular beam epitaxy, of bulk layers of HgTe, Bi2Se3 and Bi2Te3, which are the prime candidates to show the novel physics expected in this field. The existence of the relevant surface states will be assessed spectroscopically, but from there on research will focus on fabricating and characterizing nanostructures designed to elucidate the transport and magnetic properties of the topological surfaces using electrical, optical and scanning probe techniques. Apart from a general characterization of the Dirac band structure of the surface states, research will focus on the predicted magnetic monopole-like response of the system to an electrical test charge. In addition, much effort will be devoted to contacting the surface state with superconducting and magnetic top layers, with the final aim of demonstrating Majorana fermion behavior. As a final benefit, growth of thin high quality thin Bi2Se3 or Bi2Te3 layers could allow for a demonstration of the (2-dimensional) quantum spin Hall effect at room temperature - offering a road map to dissipation-less transport for the semiconductor industry.
Summary
Topological insulators constitute a novel class of materials where the topological details of the bulk band structure induce a robust surface state on the edges of the material. While transport data for 2-dimensional topological insulators have recently become available, experiments on their 3-dimensional counterparts are mainly limited to photoelectron spectroscopy. At the same time, a plethora of interesting novel physical phenomena have been predicted to occur in such systems.
In this proposal, we sketch an approach to tackle the transport and magnetic properties of the surface states in these materials. This starts with high quality layer growth, using molecular beam epitaxy, of bulk layers of HgTe, Bi2Se3 and Bi2Te3, which are the prime candidates to show the novel physics expected in this field. The existence of the relevant surface states will be assessed spectroscopically, but from there on research will focus on fabricating and characterizing nanostructures designed to elucidate the transport and magnetic properties of the topological surfaces using electrical, optical and scanning probe techniques. Apart from a general characterization of the Dirac band structure of the surface states, research will focus on the predicted magnetic monopole-like response of the system to an electrical test charge. In addition, much effort will be devoted to contacting the surface state with superconducting and magnetic top layers, with the final aim of demonstrating Majorana fermion behavior. As a final benefit, growth of thin high quality thin Bi2Se3 or Bi2Te3 layers could allow for a demonstration of the (2-dimensional) quantum spin Hall effect at room temperature - offering a road map to dissipation-less transport for the semiconductor industry.
Max ERC Funding
2 419 590 €
Duration
Start date: 2011-04-01, End date: 2016-03-31
Project acronym 3CBIOTECH
Project Cold Carbon Catabolism of Microbial Communities underprinning a Sustainable Bioenergy and Biorefinery Economy
Researcher (PI) Gavin James Collins
Host Institution (HI) NATIONAL UNIVERSITY OF IRELAND GALWAY
Call Details Starting Grant (StG), LS9, ERC-2010-StG_20091118
Summary The applicant will collaborate with Irish, European and U.S.-based colleagues to develop a sustainable biorefinery and bioenergy industry in Ireland and Europe. The focus of this ERC Starting Grant will be the application of classical microbiological, physiological and real-time polymerase chain reaction (PCR)-based assays, to qualitatively and quantitatively characterize microbial communities underpinning novel and innovative, low-temperature, anaerobic waste (and other biomass) conversion technologies, including municipal wastewater treatment and, demonstration- and full-scale biorefinery applications.
Anaerobic digestion (AD) is a naturally-occurring process, which is widely applied for the conversion of waste to methane-containing biogas. Low-temperature (<20 degrees C) AD has been applied by the applicant as a cost-effective alternative to mesophilic (c. 35C) AD for the treatment of several waste categories. However, the microbiology of low-temperature AD is poorly understood. The applicant will work with microbial consortia isolated from anaerobic bioreactors, which have been operated for long-term experiments (>3.5 years), and include organic acid-oxidizing, hydrogen-producing syntrophic microbes and hydrogen-consuming methanogens. A major focus of the project will be the ecophysiology of psychrotolerant and psychrophilic methanogens already identified and cultivated by the applicant. The project will also investigate the role(s) of poorly-understood Crenarchaeota populations and homoacetogenic bacteria, in complex consortia. The host organization is a leading player in the microbiology of waste-to-energy applications. The applicant will train a team of scientists in all aspects of the microbiology and bioengineering of biomass conversion systems.
Summary
The applicant will collaborate with Irish, European and U.S.-based colleagues to develop a sustainable biorefinery and bioenergy industry in Ireland and Europe. The focus of this ERC Starting Grant will be the application of classical microbiological, physiological and real-time polymerase chain reaction (PCR)-based assays, to qualitatively and quantitatively characterize microbial communities underpinning novel and innovative, low-temperature, anaerobic waste (and other biomass) conversion technologies, including municipal wastewater treatment and, demonstration- and full-scale biorefinery applications.
Anaerobic digestion (AD) is a naturally-occurring process, which is widely applied for the conversion of waste to methane-containing biogas. Low-temperature (<20 degrees C) AD has been applied by the applicant as a cost-effective alternative to mesophilic (c. 35C) AD for the treatment of several waste categories. However, the microbiology of low-temperature AD is poorly understood. The applicant will work with microbial consortia isolated from anaerobic bioreactors, which have been operated for long-term experiments (>3.5 years), and include organic acid-oxidizing, hydrogen-producing syntrophic microbes and hydrogen-consuming methanogens. A major focus of the project will be the ecophysiology of psychrotolerant and psychrophilic methanogens already identified and cultivated by the applicant. The project will also investigate the role(s) of poorly-understood Crenarchaeota populations and homoacetogenic bacteria, in complex consortia. The host organization is a leading player in the microbiology of waste-to-energy applications. The applicant will train a team of scientists in all aspects of the microbiology and bioengineering of biomass conversion systems.
Max ERC Funding
1 499 797 €
Duration
Start date: 2011-05-01, End date: 2016-04-30
Project acronym 3D Cer-Met
Project 3D Thin-Walled Ceramic and Ceramic-Metal Components using Electrolytic Plasma Processing
Researcher (PI) Allan MATTHEWS
Host Institution (HI) THE UNIVERSITY OF MANCHESTER
Call Details Proof of Concept (PoC), ERC-2018-PoC
Summary This proposal relates to the Proof of Concept stage investigation of exciting new findings in the ERC Advanced Grant ‘IMPUNEP’ project relating to the study and use of plasma-based processes. These findings offer significant advantages for the creation of complex 3D ceramic and ceramic-metal products at relatively low cost in an environmentally friendly manner. The potential applications of this new technology are very wide-ranging, and include the creation of new products as diverse as healthcare devices, MEMS and aero/automotive parts. Before we properly and fully identify the most promising applications, we need to investigate key aspects of the performance of materials created by this new method. This aspect wasn’t envisaged in the original proposal and involves research into the mechanical properties (especially the strength and elastic modulus) of these 3D parts and their response to deformation and dynamic displacements, as well as their physical (including electrical) properties. These components will be highly resistant to attack by aggressive (e.g. acidic) media as well as highly tolerant to both low (cryogenic) and high (combustion) temperatures. The expected applications opened up by this new method to produce ceramic and ceramic-metal components of complex shape are extensive. Hence the need for this Proof of Concept study, which will focus on validating the process for 3D ceramic-metal and ceramic parts and evaluating the mechanical, chemical, electrical and physical attributes of the 3D shapes, and will explore their potential applications in this pre-demonstration phase.
Summary
This proposal relates to the Proof of Concept stage investigation of exciting new findings in the ERC Advanced Grant ‘IMPUNEP’ project relating to the study and use of plasma-based processes. These findings offer significant advantages for the creation of complex 3D ceramic and ceramic-metal products at relatively low cost in an environmentally friendly manner. The potential applications of this new technology are very wide-ranging, and include the creation of new products as diverse as healthcare devices, MEMS and aero/automotive parts. Before we properly and fully identify the most promising applications, we need to investigate key aspects of the performance of materials created by this new method. This aspect wasn’t envisaged in the original proposal and involves research into the mechanical properties (especially the strength and elastic modulus) of these 3D parts and their response to deformation and dynamic displacements, as well as their physical (including electrical) properties. These components will be highly resistant to attack by aggressive (e.g. acidic) media as well as highly tolerant to both low (cryogenic) and high (combustion) temperatures. The expected applications opened up by this new method to produce ceramic and ceramic-metal components of complex shape are extensive. Hence the need for this Proof of Concept study, which will focus on validating the process for 3D ceramic-metal and ceramic parts and evaluating the mechanical, chemical, electrical and physical attributes of the 3D shapes, and will explore their potential applications in this pre-demonstration phase.
Max ERC Funding
149 500 €
Duration
Start date: 2019-01-01, End date: 2020-03-31