Project acronym BRIDGE
Project Bridging the gap between Gas Emissions and geophysical observations at active volcanoes
Researcher (PI) Alessandro Aiuppa
Host Institution (HI) UNIVERSITA DEGLI STUDI DI PALERMO
Country Italy
Call Details Starting Grant (StG), PE10, ERC-2012-StG_20111012
Summary In spite of their significance in a variety of volcanological aspects, gas observations at volcanoes have lagged behind geophysical studies for a long time. This has primarily reflected the inherent technical limitations met by gas geochemists in capturing volcanic gas properties (chemistry and flux) at high-rate (1 Hz), and using permanent instrumental arrays. The poor temporal resolution of volcanic gas observations has, in addition, precluded the real-time analysis of fast-occurring volcanic processes, as those occurring shortly prior to eruptions, therefore generally limiting the use of gas geochemistry in volcanic hazard assessment. However, the recent progresses made by modern multi-component/high frequency measurement techniques now open the way for decisive step ahead in the current state-of-the-art to be finally attempted.
The BRIDGE research proposal has the ambitious goals to bridge the existing technological gap between geochemical and geophysical observations at volcanoes. This will be achieved by designing, setting up, and deploying in the field, innovative instruments for 1 Hz observations of volcanic SO2 and CO2 fluxes. From this, the co-acquired volcanic gas and geophysical information will be then combined within a single interpretative framework, therefore contributing to fill our current gap of knowledge on fast (timescales of seconds/minutes) degassing processes, and to deeper exploration of the role played by gas exsolution from (and migration through) silicate liquids as effective source mechanism of the physical signals (e.g., LP and VLP seismicity, and tremor) measured at volcanoes. Finally, this combined volcanic gas-geophysical approach will be used to yield improved modelling/understanding of a variety of volcanic features, including modes/rates of gas separation from magmas, mechanisms of gas flow in conduits, and trigger mechanisms of explosive volcanic eruptions.
Summary
In spite of their significance in a variety of volcanological aspects, gas observations at volcanoes have lagged behind geophysical studies for a long time. This has primarily reflected the inherent technical limitations met by gas geochemists in capturing volcanic gas properties (chemistry and flux) at high-rate (1 Hz), and using permanent instrumental arrays. The poor temporal resolution of volcanic gas observations has, in addition, precluded the real-time analysis of fast-occurring volcanic processes, as those occurring shortly prior to eruptions, therefore generally limiting the use of gas geochemistry in volcanic hazard assessment. However, the recent progresses made by modern multi-component/high frequency measurement techniques now open the way for decisive step ahead in the current state-of-the-art to be finally attempted.
The BRIDGE research proposal has the ambitious goals to bridge the existing technological gap between geochemical and geophysical observations at volcanoes. This will be achieved by designing, setting up, and deploying in the field, innovative instruments for 1 Hz observations of volcanic SO2 and CO2 fluxes. From this, the co-acquired volcanic gas and geophysical information will be then combined within a single interpretative framework, therefore contributing to fill our current gap of knowledge on fast (timescales of seconds/minutes) degassing processes, and to deeper exploration of the role played by gas exsolution from (and migration through) silicate liquids as effective source mechanism of the physical signals (e.g., LP and VLP seismicity, and tremor) measured at volcanoes. Finally, this combined volcanic gas-geophysical approach will be used to yield improved modelling/understanding of a variety of volcanic features, including modes/rates of gas separation from magmas, mechanisms of gas flow in conduits, and trigger mechanisms of explosive volcanic eruptions.
Max ERC Funding
1 496 222 €
Duration
Start date: 2012-10-01, End date: 2016-09-30
Project acronym BrightEyes
Project Multi-Parameter Live-Cell Observation of Biomolecular Processes with Single-Photon Detector Array
Researcher (PI) Giuseppe Vicidomini
Host Institution (HI) FONDAZIONE ISTITUTO ITALIANO DI TECNOLOGIA
Country Italy
Call Details Consolidator Grant (CoG), PE7, ERC-2018-COG
Summary Fluorescence single-molecule (SM) detection techniques have the potential to provide insights into the complex functions, structures and interactions of individual, specifically labelled biomolecules. However, current SM techniques work properly only when the biomolecule is observed in controlled environments, e.g., immobilized on a glass surface. Observation of biomolecular processes in living (multi)cellular environments – which is fundamental for sound biological conclusion – always comes with a price, such as invasiveness, limitations in the accessible information and constraints in the spatial and temporal scales.
The overall objective of the BrightEyes project is to break the above limitations by creating a novel SM approach compatible with the state-of-the-art biomolecule-labelling protocols, able to track a biomolecule deep inside (multi)cellular environments – with temporal resolution in the microsecond scale, and with hundreds of micrometres tracking range – and simultaneously observe its structural changes, its nano- and micro-environments.
Specifically, by exploring a novel single-photon detectors array, the BrightEyes project will implement an optical system, able to continuously (i) track in real-time the biomolecule of interest from which to decode its dynamics and interactions; (ii) measure the nano-environment fluorescence spectroscopy properties, such as lifetime, photon-pair correlation and intensity, from which to extract the biochemical properties of the nano-environment, the structural properties of the biomolecule – via SM-FRET and anti-bunching – and the interactions of the biomolecule with other biomolecular species – via STED-FCS; (iii) visualize the sub-cellular structures within the micro-environment with sub-diffraction spatial resolution – via STED and image scanning microscopy.
This unique paradigm will enable unprecedented studies of biomolecular behaviours, interactions and self-organization at near-physiological conditions.
Summary
Fluorescence single-molecule (SM) detection techniques have the potential to provide insights into the complex functions, structures and interactions of individual, specifically labelled biomolecules. However, current SM techniques work properly only when the biomolecule is observed in controlled environments, e.g., immobilized on a glass surface. Observation of biomolecular processes in living (multi)cellular environments – which is fundamental for sound biological conclusion – always comes with a price, such as invasiveness, limitations in the accessible information and constraints in the spatial and temporal scales.
The overall objective of the BrightEyes project is to break the above limitations by creating a novel SM approach compatible with the state-of-the-art biomolecule-labelling protocols, able to track a biomolecule deep inside (multi)cellular environments – with temporal resolution in the microsecond scale, and with hundreds of micrometres tracking range – and simultaneously observe its structural changes, its nano- and micro-environments.
Specifically, by exploring a novel single-photon detectors array, the BrightEyes project will implement an optical system, able to continuously (i) track in real-time the biomolecule of interest from which to decode its dynamics and interactions; (ii) measure the nano-environment fluorescence spectroscopy properties, such as lifetime, photon-pair correlation and intensity, from which to extract the biochemical properties of the nano-environment, the structural properties of the biomolecule – via SM-FRET and anti-bunching – and the interactions of the biomolecule with other biomolecular species – via STED-FCS; (iii) visualize the sub-cellular structures within the micro-environment with sub-diffraction spatial resolution – via STED and image scanning microscopy.
This unique paradigm will enable unprecedented studies of biomolecular behaviours, interactions and self-organization at near-physiological conditions.
Max ERC Funding
1 861 250 €
Duration
Start date: 2019-09-01, End date: 2024-08-31
Project acronym BRSCDP-TEA
Project Bounded rationality and social concerns in decision processes: theory, experiments, and applications
Researcher (PI) Massimo Marinacci
Host Institution (HI) UNIVERSITA COMMERCIALE LUIGI BOCCONI
Country Italy
Call Details Advanced Grant (AdG), SH1, ERC-2008-AdG
Summary In the field of economics, individual decision making is the basic building block for studying complex environments such as markets, political systems, and social dynamics. Individual decision making is embodied in the neoclassical economically rational agent, whose only concern is the maximization of utility from his own material consumption. Two qualities of this agent are especially important for the research we will undertake: He has perfect understanding of the problems he faces - today and in the future - and unbounded computational ability to solve them. He also has no regard for the consumption of other members of the society or for their feelings about his actions. Huge empirical and experimental evidence shows that departure from these qualities is robust and significant. The failure of the existing models to incorporate bounded rationality and social concerns has proven critical in socially relevant and complex situations such as lifetime consumption and saving, taxation and expenditure policy, labour search and wage determination. The objective of this project is to bring these phenomena into the framework of neoclassical economics, to test their implications, and to tackle important applications. A novel and central feature of our approach is the attempt to retain the parsimonious methodological approach of economic modelling, which has scored groundbreaking successes in matters such as the design of auctions, markets, contracts, and voting mechanisms. Our project envisions the development of theory on individual decision making, the use of experiments to illuminate and test the theory, and the concrete application of theory - mainly to financial markets. The project will push the frontiers of the understanding of the above mentioned socially relevant situations. The explanatory power of our approach will be guaranteed by the continuous feed-back between theory and evidence- experimental and neuroexperimental, and by a departure from ad hoc modelling.
Summary
In the field of economics, individual decision making is the basic building block for studying complex environments such as markets, political systems, and social dynamics. Individual decision making is embodied in the neoclassical economically rational agent, whose only concern is the maximization of utility from his own material consumption. Two qualities of this agent are especially important for the research we will undertake: He has perfect understanding of the problems he faces - today and in the future - and unbounded computational ability to solve them. He also has no regard for the consumption of other members of the society or for their feelings about his actions. Huge empirical and experimental evidence shows that departure from these qualities is robust and significant. The failure of the existing models to incorporate bounded rationality and social concerns has proven critical in socially relevant and complex situations such as lifetime consumption and saving, taxation and expenditure policy, labour search and wage determination. The objective of this project is to bring these phenomena into the framework of neoclassical economics, to test their implications, and to tackle important applications. A novel and central feature of our approach is the attempt to retain the parsimonious methodological approach of economic modelling, which has scored groundbreaking successes in matters such as the design of auctions, markets, contracts, and voting mechanisms. Our project envisions the development of theory on individual decision making, the use of experiments to illuminate and test the theory, and the concrete application of theory - mainly to financial markets. The project will push the frontiers of the understanding of the above mentioned socially relevant situations. The explanatory power of our approach will be guaranteed by the continuous feed-back between theory and evidence- experimental and neuroexperimental, and by a departure from ad hoc modelling.
Max ERC Funding
1 399 800 €
Duration
Start date: 2009-01-01, End date: 2013-12-31
Project acronym CA2PVM
Project Multi-field and multi-scale Computational Approach to design and durability of PhotoVoltaic Modules
Researcher (PI) Marco Paggi
Host Institution (HI) SCUOLA IMT (ISTITUZIONI, MERCATI, TECNOLOGIE) ALTI STUDI DI LUCCA
Country Italy
Call Details Starting Grant (StG), PE8, ERC-2012-StG_20111012
Summary "Photovoltaics (PV) based on Silicon (Si) semiconductors is one the most growing technology in the World for renewable, sustainable, non-polluting, widely available clean energy sources. Theoretical and applied research aims at increasing the conversion efficiency of PV modules and their lifetime. The Si crystalline microstructure has an important role on both issues. Grain boundaries introduce additional resistance and reduce the conversion efficiency. Moreover, they are prone to microcracking, thus influencing the lifetime. At present, the existing standard qualification tests are not sufficient to provide a quantitative definition of lifetime, since all the possible failure mechanisms are not accounted for. In this proposal, an innovative computational approach to design and durability assessment of PV modules is put forward. The aim is to complement real tests by virtual (numerical) simulations. To achieve a predictive stage, a challenging multi-field (multi-physics) computational approach is proposed, coupling the nonlinear elastic field, the thermal field and the electric field. To model real PV modules, an adaptive multi-scale and multi-field strategy will be proposed by introducing error indicators based on the gradients of the involved fields. This numerical approach will be applied to determine the upper bound to the probability of failure of the system. This statistical assessment will involve an optimization analysis that will be efficiently handled by a Mathematica-based hybrid symbolic-numerical framework. Standard and non-standard experimental testing on Si cells and PV modules will also be performed to complement and validate the numerical approach. The new methodology based on the challenging integration of advanced physical and mathematical modelling, innovative computational methods and non-standard experimental techniques is expected to have a significant impact on the design, qualification and lifetime assessment of complex PV systems."
Summary
"Photovoltaics (PV) based on Silicon (Si) semiconductors is one the most growing technology in the World for renewable, sustainable, non-polluting, widely available clean energy sources. Theoretical and applied research aims at increasing the conversion efficiency of PV modules and their lifetime. The Si crystalline microstructure has an important role on both issues. Grain boundaries introduce additional resistance and reduce the conversion efficiency. Moreover, they are prone to microcracking, thus influencing the lifetime. At present, the existing standard qualification tests are not sufficient to provide a quantitative definition of lifetime, since all the possible failure mechanisms are not accounted for. In this proposal, an innovative computational approach to design and durability assessment of PV modules is put forward. The aim is to complement real tests by virtual (numerical) simulations. To achieve a predictive stage, a challenging multi-field (multi-physics) computational approach is proposed, coupling the nonlinear elastic field, the thermal field and the electric field. To model real PV modules, an adaptive multi-scale and multi-field strategy will be proposed by introducing error indicators based on the gradients of the involved fields. This numerical approach will be applied to determine the upper bound to the probability of failure of the system. This statistical assessment will involve an optimization analysis that will be efficiently handled by a Mathematica-based hybrid symbolic-numerical framework. Standard and non-standard experimental testing on Si cells and PV modules will also be performed to complement and validate the numerical approach. The new methodology based on the challenging integration of advanced physical and mathematical modelling, innovative computational methods and non-standard experimental techniques is expected to have a significant impact on the design, qualification and lifetime assessment of complex PV systems."
Max ERC Funding
1 483 980 €
Duration
Start date: 2012-12-01, End date: 2017-11-30
Project acronym CALDER
Project Cryogenic wide-Area Light Detectors
with Excellent Resolution
Researcher (PI) Marco Vignati
Host Institution (HI) ISTITUTO NAZIONALE DI FISICA NUCLEARE
Country Italy
Call Details Starting Grant (StG), PE2, ERC-2013-StG
Summary "In the comprehension of fundamental laws of nature, particle physics is now facing two important questions:
1) What is the nature of the neutrino, is it a standard (Dirac) particle or a Majorana particle? The nature of the neutrino plays a crucial role in the global framework of particle interactions and in cosmology. The only practicable way to answer this question is to search for a nuclear process called ""neutrinoless double beta decay"" (0nuDBD).
2) What is the so called ""dark matter"" made of? Astrophysical observations suggest that the largest part of the mass of the Universe is composed by a form of matter other than atoms and known matter constituents. We still do not know what dark matter is made of because its rate of interaction with ordinary matter is really low, thus making the direct experimental detection extremely difficult.
Both 0nuDBD and dark matter interactions are rare processes and can be detected using the same experimental technique. Bolometers are promising devices and their combination with light detectors provides the identification of interacting particles, a powerful tool to reduce the background.
The goal of CALDER is to realize a new type of light detectors to improve the upcoming generation of bolometric experiments. The detectors will be designed to feature unprecedented energy resolution and reliability, to ensure an almost complete particle identification. In case of success, CUORE, a 0nuDBD experiment in construction, would gain in sensitivity by up to a factor 6. LUCIFER, a 0nuDBD experiment already implementing the light detection, could be sensitive also to dark matter interactions, thus increasing its research potential. The light detectors will be based on Kinetic Inductance Detectors (KIDs), a new technology that proved its potential in astrophysical applications but that is still new in the field of particle physics and rare event searches."
Summary
"In the comprehension of fundamental laws of nature, particle physics is now facing two important questions:
1) What is the nature of the neutrino, is it a standard (Dirac) particle or a Majorana particle? The nature of the neutrino plays a crucial role in the global framework of particle interactions and in cosmology. The only practicable way to answer this question is to search for a nuclear process called ""neutrinoless double beta decay"" (0nuDBD).
2) What is the so called ""dark matter"" made of? Astrophysical observations suggest that the largest part of the mass of the Universe is composed by a form of matter other than atoms and known matter constituents. We still do not know what dark matter is made of because its rate of interaction with ordinary matter is really low, thus making the direct experimental detection extremely difficult.
Both 0nuDBD and dark matter interactions are rare processes and can be detected using the same experimental technique. Bolometers are promising devices and their combination with light detectors provides the identification of interacting particles, a powerful tool to reduce the background.
The goal of CALDER is to realize a new type of light detectors to improve the upcoming generation of bolometric experiments. The detectors will be designed to feature unprecedented energy resolution and reliability, to ensure an almost complete particle identification. In case of success, CUORE, a 0nuDBD experiment in construction, would gain in sensitivity by up to a factor 6. LUCIFER, a 0nuDBD experiment already implementing the light detection, could be sensitive also to dark matter interactions, thus increasing its research potential. The light detectors will be based on Kinetic Inductance Detectors (KIDs), a new technology that proved its potential in astrophysical applications but that is still new in the field of particle physics and rare event searches."
Max ERC Funding
1 176 758 €
Duration
Start date: 2014-03-01, End date: 2019-02-28
Project acronym CAPABLE
Project Composite integrated photonic platform by femtosecond laser micromachining
Researcher (PI) Roberto OSELLAME
Host Institution (HI) CONSIGLIO NAZIONALE DELLE RICERCHE
Country Italy
Call Details Advanced Grant (AdG), PE7, ERC-2016-ADG
Summary The quantum technology revolution promises a transformational impact on the society and economics worldwide. It will enable breakthrough advancements in such diverse fields as secure communications, computing, metrology, and imaging. Quantum photonics, which recently received an incredible boost by the use of integrated optical circuits, is an excellent technological platform to enable such revolution, as it already plays a relevant role in many of the above applications. However, some major technical roadblocks needs to be overcome. Currently, the various components required for a complete quantum photonic system are produced on very different materials by dedicated fabrication technologies, as no single material is able to fulfil all the requirements for single-photon generation, manipulation, storage and detection. This project proposes a new hybrid approach for integrated quantum photonic systems based on femtosecond laser microfabrication (FLM), enabling the innovative miniaturization of various components on different materials, but with a single tool and with very favourable integration capabilities.
This project will mainly focus on two major breakthroughs: the first one will be increasing the complexity achievable in the photonic platform and demonstrating unprecedented quantum computation capability; the second one will be the integration in the platform of multiple single-photon quantum memories and their interconnection.
Achievement of these goals will only be possible by taking full advantage of the unique features of FLM, from the possibility to machine very different materials, to the 3D capabilities in waveguide writing and selective material removal.
The successful demonstration and functional validation of this hybrid, integrated photonic platform will represent a significant leap for photonic microsystems in quantum computing and quantum communications.
Summary
The quantum technology revolution promises a transformational impact on the society and economics worldwide. It will enable breakthrough advancements in such diverse fields as secure communications, computing, metrology, and imaging. Quantum photonics, which recently received an incredible boost by the use of integrated optical circuits, is an excellent technological platform to enable such revolution, as it already plays a relevant role in many of the above applications. However, some major technical roadblocks needs to be overcome. Currently, the various components required for a complete quantum photonic system are produced on very different materials by dedicated fabrication technologies, as no single material is able to fulfil all the requirements for single-photon generation, manipulation, storage and detection. This project proposes a new hybrid approach for integrated quantum photonic systems based on femtosecond laser microfabrication (FLM), enabling the innovative miniaturization of various components on different materials, but with a single tool and with very favourable integration capabilities.
This project will mainly focus on two major breakthroughs: the first one will be increasing the complexity achievable in the photonic platform and demonstrating unprecedented quantum computation capability; the second one will be the integration in the platform of multiple single-photon quantum memories and their interconnection.
Achievement of these goals will only be possible by taking full advantage of the unique features of FLM, from the possibility to machine very different materials, to the 3D capabilities in waveguide writing and selective material removal.
The successful demonstration and functional validation of this hybrid, integrated photonic platform will represent a significant leap for photonic microsystems in quantum computing and quantum communications.
Max ERC Funding
2 381 875 €
Duration
Start date: 2017-10-01, End date: 2022-09-30
Project acronym CAPTUR3D
Project CAPTURING THE PHYSICS OF LIFE ON 3D-TRAFFICKING SUBCELLULAR NANOSYSTEMS
Researcher (PI) Francesco CARDARELLI
Host Institution (HI) SCUOLA NORMALE SUPERIORE
Country Italy
Call Details Consolidator Grant (CoG), PE3, ERC-2019-COG
Summary Which physical principles govern life regulation at the level of subcellular, membrane-enclosed nanosystems, such as transport vesicles and organelles? How do they achieve controlled movements across the crowded intracellular world? Which is the structural and functional organization of their surface and their lumen? This is only a small subset of key open questions that the biophysical approach envisaged here will allow to answer directly within living matter, for the first time.
Thus far, state-of-the-art optical microscopy tools for delivering quantitative information in living matter failed to subtract the natural 3D movement of subcellular nanosystems while preserving the spatial and temporal resolution required to probe their structure and function at the molecular level.
CAPTUR3D will tackle this bottleneck. An excitation light-beam will be focused in a periodic orbit around the nanosystem of interest and used to localize its position with unprecedented spatial (~10 nm) and temporal (~1000 Hz frequency response) resolution. Such privileged observation point will push biophysical investigations to a new level. For the first time, state-of-the-art imaging technologies and analytical tools (e.g. fluorescence correlation spectroscopy), will be used to perform molecular investigations on a moving, nanoscopic reference system.
The insulin secretory granule (ISG) is selected as a paradigmatic case study. Key open issues at the ISG level are selected, namely: (i) ISG-environment interactions and their role in directing ISG trafficking, (ii) ISG-membrane spatiotemporal organization, (iii) ISG-lumen structural and functional organization, (iv) ISG alterations in type-2 diabetes (T2D). These issues will be tackled directly within human-derived Langherans islets.
CAPTUR3D is envisioned not only to foster our knowledge on T2D physiopathology but also to concomitantly drive an unprecedented revolution in the way we address living matter at the subcellular scale.
Summary
Which physical principles govern life regulation at the level of subcellular, membrane-enclosed nanosystems, such as transport vesicles and organelles? How do they achieve controlled movements across the crowded intracellular world? Which is the structural and functional organization of their surface and their lumen? This is only a small subset of key open questions that the biophysical approach envisaged here will allow to answer directly within living matter, for the first time.
Thus far, state-of-the-art optical microscopy tools for delivering quantitative information in living matter failed to subtract the natural 3D movement of subcellular nanosystems while preserving the spatial and temporal resolution required to probe their structure and function at the molecular level.
CAPTUR3D will tackle this bottleneck. An excitation light-beam will be focused in a periodic orbit around the nanosystem of interest and used to localize its position with unprecedented spatial (~10 nm) and temporal (~1000 Hz frequency response) resolution. Such privileged observation point will push biophysical investigations to a new level. For the first time, state-of-the-art imaging technologies and analytical tools (e.g. fluorescence correlation spectroscopy), will be used to perform molecular investigations on a moving, nanoscopic reference system.
The insulin secretory granule (ISG) is selected as a paradigmatic case study. Key open issues at the ISG level are selected, namely: (i) ISG-environment interactions and their role in directing ISG trafficking, (ii) ISG-membrane spatiotemporal organization, (iii) ISG-lumen structural and functional organization, (iv) ISG alterations in type-2 diabetes (T2D). These issues will be tackled directly within human-derived Langherans islets.
CAPTUR3D is envisioned not only to foster our knowledge on T2D physiopathology but also to concomitantly drive an unprecedented revolution in the way we address living matter at the subcellular scale.
Max ERC Funding
1 985 750 €
Duration
Start date: 2021-03-01, End date: 2026-02-28
Project acronym CARBONANOBRIDGE
Project Neuron Networking with Nano Bridges via the Synthesis and Integration of Functionalized Carbon Nanotubes
Researcher (PI) Maurizio Prato
Host Institution (HI) UNIVERSITA DEGLI STUDI DI TRIESTE
Country Italy
Call Details Advanced Grant (AdG), PE5, ERC-2008-AdG
Summary We propose the development of novel nanodevices, such as nanoscale bridges and nanovectors, based on functionalized carbon nanotubes (CNT) for manipulating neurons and neuronal network activity in vitro. The main aim is to put forward innovative solutions that have the potential to circumvent the problems currently faced by spinal cord lesions or by neurodegenerative diseases. The unifying theme is to use recent advances in chemistry and nanotechnology to gain insight into the functioning of hybrid neuronal/CNT networks, relevant for the development of novel implantable devices to control neuronal signaling and improve synapse formation in a controlled fashion. The proposal s core strategy is to exploit the expertise of the PI in the chemical control of CNT properties to develop devices reaching various degrees of functional integration with the physiological electrical activity of cells and their networks, and to understand how such global dynamics are orchestrated when integrated by different substrates. An unconventional strategy will be represented by the electrical characterization of micro and nano patterned substrates by AFM and conductive tip AFM, both before and after neurons have grown on the substrates. We will also use the capability of AFM to identify critical positions in the neuronal network, while delivering time-dependent chemical stimulations. We will apply nanotechnology to contemporary neuroscience in the perspective of novel neuro-implantable devices and drug nanovectors, engineered to treat neurological and neurodegenerative lesions. The scientific strategy at the core of the proposal is the convergence between nanotechnology, chemistry and neurobiology. Such convergence, beyond helping understand the functioning and malfunctioning of the brain, can stimulate further research in this area and may ultimately lead to a new generation of nanomedicine applications in neurology and to new opportunities for the health care industry.
Summary
We propose the development of novel nanodevices, such as nanoscale bridges and nanovectors, based on functionalized carbon nanotubes (CNT) for manipulating neurons and neuronal network activity in vitro. The main aim is to put forward innovative solutions that have the potential to circumvent the problems currently faced by spinal cord lesions or by neurodegenerative diseases. The unifying theme is to use recent advances in chemistry and nanotechnology to gain insight into the functioning of hybrid neuronal/CNT networks, relevant for the development of novel implantable devices to control neuronal signaling and improve synapse formation in a controlled fashion. The proposal s core strategy is to exploit the expertise of the PI in the chemical control of CNT properties to develop devices reaching various degrees of functional integration with the physiological electrical activity of cells and their networks, and to understand how such global dynamics are orchestrated when integrated by different substrates. An unconventional strategy will be represented by the electrical characterization of micro and nano patterned substrates by AFM and conductive tip AFM, both before and after neurons have grown on the substrates. We will also use the capability of AFM to identify critical positions in the neuronal network, while delivering time-dependent chemical stimulations. We will apply nanotechnology to contemporary neuroscience in the perspective of novel neuro-implantable devices and drug nanovectors, engineered to treat neurological and neurodegenerative lesions. The scientific strategy at the core of the proposal is the convergence between nanotechnology, chemistry and neurobiology. Such convergence, beyond helping understand the functioning and malfunctioning of the brain, can stimulate further research in this area and may ultimately lead to a new generation of nanomedicine applications in neurology and to new opportunities for the health care industry.
Max ERC Funding
2 500 000 €
Duration
Start date: 2009-02-01, End date: 2014-01-31
Project acronym CARDIOEPIGEN
Project Epigenetics and microRNAs in Myocardial Function and Disease
Researcher (PI) Gianluigi Condorelli
Host Institution (HI) HUMANITAS MIRASOLE SPA
Country Italy
Call Details Advanced Grant (AdG), LS4, ERC-2011-ADG_20110310
Summary Heart failure (HF) is the ultimate outcome of many cardiovascular diseases. Re-expression of fetal genes in the adult heart contributes to development of HF. Two mechanisms involved in the control of gene expression are epigenetics and microRNAs (miRs). We propose a project on epigenetic and miR-mediated mechanisms leading to HF.
Epigenetics refers to heritable modification of DNA and histones that does not modify the genetic code. Depending on the type of modification and on the site affected, these chemical changes up- or down-regulate transcription of specific genes. Despite it being a major player in gene regulation, epigenetics has been only partly investigated in HF. miRs are regulatory RNAs that target mRNAs for inhibition. Dysregulation of the cardiac miR signature occurs in HF. miR expression may itself be under epigenetic control, constituting a miR-epigenetic regulatory network. To our knowledge, this possibility has not been studied yet.
Our specific hypothesis is that the profile of DNA/histone methylation and the cross-talk between epigenetic enzymes and miRs have fundamental roles in defining the characteristics of cells during cardiac development and that the dysregulation of these processes determines the deleterious nature of the stressed heart’s gene programme. We will test this first through a genome-wide study of DNA/histone methylation to generate maps of the main methylation modifications occurring in the genome of cardiac cells treated with a pro-hypertrophy regulator and of a HF model. We will then investigate the role of epigenetic enzymes deemed important in HF, through the generation and study of knockout mice models. Finally, we will test the possible therapeutic potential of modulating epigenetic genes.
We hope to further understand the pathological mechanisms leading to HF and to generate data instrumental to the development of diagnostic and therapeutic strategies for this disease.
Summary
Heart failure (HF) is the ultimate outcome of many cardiovascular diseases. Re-expression of fetal genes in the adult heart contributes to development of HF. Two mechanisms involved in the control of gene expression are epigenetics and microRNAs (miRs). We propose a project on epigenetic and miR-mediated mechanisms leading to HF.
Epigenetics refers to heritable modification of DNA and histones that does not modify the genetic code. Depending on the type of modification and on the site affected, these chemical changes up- or down-regulate transcription of specific genes. Despite it being a major player in gene regulation, epigenetics has been only partly investigated in HF. miRs are regulatory RNAs that target mRNAs for inhibition. Dysregulation of the cardiac miR signature occurs in HF. miR expression may itself be under epigenetic control, constituting a miR-epigenetic regulatory network. To our knowledge, this possibility has not been studied yet.
Our specific hypothesis is that the profile of DNA/histone methylation and the cross-talk between epigenetic enzymes and miRs have fundamental roles in defining the characteristics of cells during cardiac development and that the dysregulation of these processes determines the deleterious nature of the stressed heart’s gene programme. We will test this first through a genome-wide study of DNA/histone methylation to generate maps of the main methylation modifications occurring in the genome of cardiac cells treated with a pro-hypertrophy regulator and of a HF model. We will then investigate the role of epigenetic enzymes deemed important in HF, through the generation and study of knockout mice models. Finally, we will test the possible therapeutic potential of modulating epigenetic genes.
We hope to further understand the pathological mechanisms leading to HF and to generate data instrumental to the development of diagnostic and therapeutic strategies for this disease.
Max ERC Funding
2 500 000 €
Duration
Start date: 2012-10-01, End date: 2018-09-30
Project acronym CAVE
Project Challenges and Advancements in Virtual Elements
Researcher (PI) Lourenco Beirao da veiga
Host Institution (HI) UNIVERSITA' DEGLI STUDI DI MILANO-BICOCCA
Country Italy
Call Details Consolidator Grant (CoG), PE1, ERC-2015-CoG
Summary The Virtual Element Method (VEM) is a novel technology for the discretization of partial differential equations (PDEs), that shares the same variational background as the Finite Element Method. First but not only, the VEM responds to the strongly increasing interest in using general polyhedral and polygonal meshes in the approximation of PDEs without the limit of using tetrahedral or hexahedral grids. By avoiding the explicit integration of the shape functions that span the discrete space and introducing an innovative construction of the stiffness matrixes, the VEM acquires very interesting properties and advantages with respect to more standard Galerkin methods, yet still keeping the same coding complexity. For instance, the VEM easily allows for polygonal/polyhedral meshes (even non-conforming) with non-convex elements and possibly with curved faces; it allows for discrete spaces of arbitrary C^k regularity on unstructured meshes.
The main scope of the project is to address the recent theoretical challenges posed by VEM and to assess whether this promising technology can achieve a breakthrough in applications. First, the theoretical and computational foundations of VEM will be made stronger. A deeper theoretical insight, supported by a wider numerical experience on benchmark problems, will be developed to gain a better understanding of the method's potentials and set the foundations for more applicative purposes. Second, we will focus our attention on two tough and up-to-date problems of practical interest: large deformation elasticity (where VEM can yield a dramatically more efficient handling of material inclusions, meshing of the domain and grid adaptivity, plus a much stronger robustness with respect to large grid distortions) and the cardiac bidomain model (where VEM can lead to a more accurate domain approximation through MRI data, a flexible refinement/de-refinement procedure along the propagation front, to an exact satisfaction of conservation laws).
Summary
The Virtual Element Method (VEM) is a novel technology for the discretization of partial differential equations (PDEs), that shares the same variational background as the Finite Element Method. First but not only, the VEM responds to the strongly increasing interest in using general polyhedral and polygonal meshes in the approximation of PDEs without the limit of using tetrahedral or hexahedral grids. By avoiding the explicit integration of the shape functions that span the discrete space and introducing an innovative construction of the stiffness matrixes, the VEM acquires very interesting properties and advantages with respect to more standard Galerkin methods, yet still keeping the same coding complexity. For instance, the VEM easily allows for polygonal/polyhedral meshes (even non-conforming) with non-convex elements and possibly with curved faces; it allows for discrete spaces of arbitrary C^k regularity on unstructured meshes.
The main scope of the project is to address the recent theoretical challenges posed by VEM and to assess whether this promising technology can achieve a breakthrough in applications. First, the theoretical and computational foundations of VEM will be made stronger. A deeper theoretical insight, supported by a wider numerical experience on benchmark problems, will be developed to gain a better understanding of the method's potentials and set the foundations for more applicative purposes. Second, we will focus our attention on two tough and up-to-date problems of practical interest: large deformation elasticity (where VEM can yield a dramatically more efficient handling of material inclusions, meshing of the domain and grid adaptivity, plus a much stronger robustness with respect to large grid distortions) and the cardiac bidomain model (where VEM can lead to a more accurate domain approximation through MRI data, a flexible refinement/de-refinement procedure along the propagation front, to an exact satisfaction of conservation laws).
Max ERC Funding
980 634 €
Duration
Start date: 2016-07-01, End date: 2021-06-30