Project acronym ANTILEAK
Project Development of antagonists of vascular leakage
Researcher (PI) Pipsa SAHARINEN
Host Institution (HI) HELSINGIN YLIOPISTO
Country Finland
Call Details Consolidator Grant (CoG), LS4, ERC-2017-COG
Summary Dysregulation of capillary permeability is a severe problem in critically ill patients, but the mechanisms involved are poorly understood. Further, there are no targeted therapies to stabilize leaky vessels in various common, potentially fatal diseases, such as systemic inflammation and sepsis, which affect millions of people annually. Although a multitude of signals that stimulate opening of endothelial cell-cell junctions leading to permeability have been characterized using cellular and in vivo models, approaches to reverse the harmful process of capillary leakage in disease conditions are yet to be identified. I propose to explore a novel autocrine endothelial permeability regulatory system as a potentially universal mechanism that antagonizes vascular stabilizing ques and sustains vascular leakage in inflammation. My group has identified inflammation-induced mechanisms that switch vascular stabilizing factors into molecules that destabilize vascular barriers, and identified tools to prevent the barrier disruption. Building on these discoveries, my group will use mouse genetics, structural biology and innovative, systematic antibody development coupled with gene editing and gene silencing technology, in order to elucidate mechanisms of vascular barrier breakdown and repair in systemic inflammation. The expected outcomes include insights into endothelial cell signaling and permeability regulation, and preclinical proof-of-concept antibodies to control endothelial activation and vascular leakage in systemic inflammation and sepsis models. Ultimately, the new knowledge and preclinical tools developed in this project may facilitate future development of targeted approaches against vascular leakage.
Summary
Dysregulation of capillary permeability is a severe problem in critically ill patients, but the mechanisms involved are poorly understood. Further, there are no targeted therapies to stabilize leaky vessels in various common, potentially fatal diseases, such as systemic inflammation and sepsis, which affect millions of people annually. Although a multitude of signals that stimulate opening of endothelial cell-cell junctions leading to permeability have been characterized using cellular and in vivo models, approaches to reverse the harmful process of capillary leakage in disease conditions are yet to be identified. I propose to explore a novel autocrine endothelial permeability regulatory system as a potentially universal mechanism that antagonizes vascular stabilizing ques and sustains vascular leakage in inflammation. My group has identified inflammation-induced mechanisms that switch vascular stabilizing factors into molecules that destabilize vascular barriers, and identified tools to prevent the barrier disruption. Building on these discoveries, my group will use mouse genetics, structural biology and innovative, systematic antibody development coupled with gene editing and gene silencing technology, in order to elucidate mechanisms of vascular barrier breakdown and repair in systemic inflammation. The expected outcomes include insights into endothelial cell signaling and permeability regulation, and preclinical proof-of-concept antibodies to control endothelial activation and vascular leakage in systemic inflammation and sepsis models. Ultimately, the new knowledge and preclinical tools developed in this project may facilitate future development of targeted approaches against vascular leakage.
Max ERC Funding
1 999 770 €
Duration
Start date: 2018-05-01, End date: 2023-04-30
Project acronym BHIVE
Project Bio-derived HIgh Value polymers through novel Enzyme function
Researcher (PI) Emma Rusi Master
Host Institution (HI) AALTO KORKEAKOULUSAATIO SR
Country Finland
Call Details Consolidator Grant (CoG), LS9, ERC-2014-CoG
Summary Recent advances in systems-level study of cells and organisms have revealed the enormous potential to live more sustainably through better use of biological processes. Plants sustainably synthesize the most abundant and diverse materials on Earth. By applying recent advances in life science technology, we can better harness renewable plant resources and bioconversion processes, to develop environmentally and politically sustainable human enterprise and lifestyles. At the same time, the global market for high-value biochemicals and bioplastics from forest and agricultural sources is rapidly increasing, which presents new opportunities for forest and agricultural sectors.
The overall aim of BHIVE is to illuminate uncharted regions of genome and metagenome sequences to discover entirely new protein families that can be used to sustainably synthesize novel, high-value biomaterials from renewable plant resources. The approach will include three parallel research thrusts: 1) strategic analysis of transcriptome and metagenome sequences to identify proteins with entirely unknown function relevant to biomass (lignocellulose) transformation, 2) mapping of uncharted regions within phylogenetic trees of poorly characterized enzyme families with recognized potential to modify the chemistry and biophysical properties of plant polysaccharides, and 3) the design and development of novel enzyme screens to directly address the increasing limitations of existing assays to uncover entirely new protein functions. BHIVE will be unique in its undivided focus on characterizing lignocellulose-active proteins encoded by the 30-40% of un-annotated sequence, or genomic “dark matter”, typical of nearly all genome sequences. In this way, BHIVE tackles a key constraint to fully realizing the societal and environmental benefits of the genomics era.
Summary
Recent advances in systems-level study of cells and organisms have revealed the enormous potential to live more sustainably through better use of biological processes. Plants sustainably synthesize the most abundant and diverse materials on Earth. By applying recent advances in life science technology, we can better harness renewable plant resources and bioconversion processes, to develop environmentally and politically sustainable human enterprise and lifestyles. At the same time, the global market for high-value biochemicals and bioplastics from forest and agricultural sources is rapidly increasing, which presents new opportunities for forest and agricultural sectors.
The overall aim of BHIVE is to illuminate uncharted regions of genome and metagenome sequences to discover entirely new protein families that can be used to sustainably synthesize novel, high-value biomaterials from renewable plant resources. The approach will include three parallel research thrusts: 1) strategic analysis of transcriptome and metagenome sequences to identify proteins with entirely unknown function relevant to biomass (lignocellulose) transformation, 2) mapping of uncharted regions within phylogenetic trees of poorly characterized enzyme families with recognized potential to modify the chemistry and biophysical properties of plant polysaccharides, and 3) the design and development of novel enzyme screens to directly address the increasing limitations of existing assays to uncover entirely new protein functions. BHIVE will be unique in its undivided focus on characterizing lignocellulose-active proteins encoded by the 30-40% of un-annotated sequence, or genomic “dark matter”, typical of nearly all genome sequences. In this way, BHIVE tackles a key constraint to fully realizing the societal and environmental benefits of the genomics era.
Max ERC Funding
1 977 781 €
Duration
Start date: 2015-09-01, End date: 2020-12-31
Project acronym BIZEB
Project Bio-Imaging of Zoonotic and Emerging Bunyaviruses
Researcher (PI) Juha Huiskonen
Host Institution (HI) HELSINGIN YLIOPISTO
Country Finland
Call Details Consolidator Grant (CoG), LS1, ERC-2014-CoG
Summary We aim to understand host cell entry of enveloped viruses at molecular level. A crucial step in this process is when the viral membrane fuses with the cell membrane. Similarly to cell–cell fusion, this step is mediated by fusion proteins (classes I–III). Several medically important viruses, notably dengue and many bunyaviruses, harbour a class II fusion protein. Class II fusion protein structures have been solved in pre- and post-fusion conformation and in some cases different factors promoting fusion have been determined. However, questions about the most important steps of this key process remain unanswered. I will focus on the entry mechanism of bunyaviruses by using cutting-edge, high spatial and temporal resolution bio-imaging techniques. These viruses have been chosen as a model system to maximise the significance of the project: they form an emerging viral threat to humans and animals, no approved vaccines or antivirals exist for human use and they are less studied than other class II fusion protein systems. Cryo-electron microscopy and tomography will be used to solve high-resolution structures (up to ~3 Å) of viruses, in addition to virus–receptor and virus–membrane complexes. Advanced fluorescence microscopy techniques will be used to probe the dynamics of virus entry and fusion in vivo and in vitro. Deciphering key steps in virus entry is expected to contribute to rational vaccine and drug design. During this project I aim to establish a world-class laboratory in structural and cellular biology of emerging viruses. The project greatly benefits from our unique biosafety level 3 laboratory offering advanced bio-imaging techniques. Furthermore it will also pave way for similar projects on other infectious viruses. Finally the novel computational image processing methods developed in this project will be broadly applicable for the analysis of flexible biological structures, which often pose the most challenging yet interesting questions in structural biology.
Summary
We aim to understand host cell entry of enveloped viruses at molecular level. A crucial step in this process is when the viral membrane fuses with the cell membrane. Similarly to cell–cell fusion, this step is mediated by fusion proteins (classes I–III). Several medically important viruses, notably dengue and many bunyaviruses, harbour a class II fusion protein. Class II fusion protein structures have been solved in pre- and post-fusion conformation and in some cases different factors promoting fusion have been determined. However, questions about the most important steps of this key process remain unanswered. I will focus on the entry mechanism of bunyaviruses by using cutting-edge, high spatial and temporal resolution bio-imaging techniques. These viruses have been chosen as a model system to maximise the significance of the project: they form an emerging viral threat to humans and animals, no approved vaccines or antivirals exist for human use and they are less studied than other class II fusion protein systems. Cryo-electron microscopy and tomography will be used to solve high-resolution structures (up to ~3 Å) of viruses, in addition to virus–receptor and virus–membrane complexes. Advanced fluorescence microscopy techniques will be used to probe the dynamics of virus entry and fusion in vivo and in vitro. Deciphering key steps in virus entry is expected to contribute to rational vaccine and drug design. During this project I aim to establish a world-class laboratory in structural and cellular biology of emerging viruses. The project greatly benefits from our unique biosafety level 3 laboratory offering advanced bio-imaging techniques. Furthermore it will also pave way for similar projects on other infectious viruses. Finally the novel computational image processing methods developed in this project will be broadly applicable for the analysis of flexible biological structures, which often pose the most challenging yet interesting questions in structural biology.
Max ERC Funding
1 998 375 €
Duration
Start date: 2015-04-01, End date: 2020-03-31
Project acronym CapTherPV
Project Integration of Capacitor, Thermoelectric and PhotoVoltaic thin films for efficient energy conversion and storage
Researcher (PI) Isabel Maria Das Merces Ferreira
Host Institution (HI) NOVA ID FCT - ASSOCIACAO PARA A INOVACAO E DESENVOLVIMENTO DA FCT
Country Portugal
Call Details Consolidator Grant (CoG), PE8, ERC-2014-CoG
Summary The possibility of having a unique device that converts thermal and photonics energy into electrical energy and simultaneously stores it, is something dreamed by the PI since the beginning of her research career. To achieve that goal, this project aims to gather, in a single substrate, solar cells with up-conversion nanoparticles, thermoelectrics and graphene super-capacitor, all made of thin films. These three main components will be developed separately and integrated sequentially. The innovation proposed is not limited to the integration of components, but rely in ground-breaking concepts: 1) thermoelectric elements based on thin film (TE-TF) oxides; 2) plasmonic nanoparticles for up conversion of near infrared radiation to visible emission in solar cells; 3) graphene super-capacitors; 4) integration and optimization of all components in a single CapTherPV device. This ambitious project will bring new insights at large area, low cost and flexible energy harvesting and comes from an old idea of combining energy conversion and storage that has been pursued by the PI. She started her career in amorphous silicon thin film solar cells, later she started the development of thin film batteries and more recently started a research line in thermoelectric films. If approved, this project will give financial support to consolidate the research being carried out and will give independence to the PI in terms of resources and creative think. More importantly, will facilitate the concretization of the dream that has been pursued with hard work.
Summary
The possibility of having a unique device that converts thermal and photonics energy into electrical energy and simultaneously stores it, is something dreamed by the PI since the beginning of her research career. To achieve that goal, this project aims to gather, in a single substrate, solar cells with up-conversion nanoparticles, thermoelectrics and graphene super-capacitor, all made of thin films. These three main components will be developed separately and integrated sequentially. The innovation proposed is not limited to the integration of components, but rely in ground-breaking concepts: 1) thermoelectric elements based on thin film (TE-TF) oxides; 2) plasmonic nanoparticles for up conversion of near infrared radiation to visible emission in solar cells; 3) graphene super-capacitors; 4) integration and optimization of all components in a single CapTherPV device. This ambitious project will bring new insights at large area, low cost and flexible energy harvesting and comes from an old idea of combining energy conversion and storage that has been pursued by the PI. She started her career in amorphous silicon thin film solar cells, later she started the development of thin film batteries and more recently started a research line in thermoelectric films. If approved, this project will give financial support to consolidate the research being carried out and will give independence to the PI in terms of resources and creative think. More importantly, will facilitate the concretization of the dream that has been pursued with hard work.
Max ERC Funding
1 999 375 €
Duration
Start date: 2015-07-01, End date: 2021-09-30
Project acronym CATCH
Project Cross-dimensional Activation of Two-Dimensional Semiconductors for Photocatalytic Heterojunctions
Researcher (PI) Wei CAO
Host Institution (HI) OULUN YLIOPISTO
Country Finland
Call Details Consolidator Grant (CoG), PE8, ERC-2020-COG
Summary Spacetime defines existence and evolution of materials. A key path to human’s sustainability through materials innovation can hardly circumvent materials dimensionalities. Despite numerous studies in electrically distinct 2D semiconductors, the route to engage them in high-performance photocatalysts remains elusive. Herein, CATCH proposes a cross-dimensional activation strategy of 2D semiconductors to implement practical photocatalysis. It operates electronic structures of dimensionally paradoxical 2D semiconductors and spatially limited nD (n=0-2) guests, directs charge migration processes, mass-produces advanced catalysts and elucidates time-evolved catalysis. Synergic impacts crossing 2D-nD will lead to > 95%/hour rates for pollutant removal and >20% quantum efficiencies for H2 evolution under visible light. CATCH enumerates chemical coordination and writes reaction equations with sub-nanosecond precision.
CATCH employs density functional theory optimization and data mining prediction to select most probable heterojunctional peers from hetero/homo- dimensions. Through facile but efficient wet and dry synthesis, nanostructures will be bonded to basal planes or brinks of 2D slabs. CATCH benefits in-house techniques for product characterizations and refinements and emphasizes on cutting-edge in situ studies to unveil photocatalysis at advanced photon sources. Assisted with theoretical modelling, ambient and time-evolved experiments will illustrate photocatalytic dynamics and kinetics in mixed spacetime.
CATCH unites low-dimensional materials designs by counting physical and electronic merits from spacetime confinements. It metrologically elaborates photocatalysis in an elevated 2D+nD+t, alters passages of materials combinations crossing dimensions, and directs future photocatalyst designs. Standing on cross-dimensional materials innovation and photocatalysis study, CATCH breaks the deadlock of practical photocatalysis that eventually leads to sustainability.
Summary
Spacetime defines existence and evolution of materials. A key path to human’s sustainability through materials innovation can hardly circumvent materials dimensionalities. Despite numerous studies in electrically distinct 2D semiconductors, the route to engage them in high-performance photocatalysts remains elusive. Herein, CATCH proposes a cross-dimensional activation strategy of 2D semiconductors to implement practical photocatalysis. It operates electronic structures of dimensionally paradoxical 2D semiconductors and spatially limited nD (n=0-2) guests, directs charge migration processes, mass-produces advanced catalysts and elucidates time-evolved catalysis. Synergic impacts crossing 2D-nD will lead to > 95%/hour rates for pollutant removal and >20% quantum efficiencies for H2 evolution under visible light. CATCH enumerates chemical coordination and writes reaction equations with sub-nanosecond precision.
CATCH employs density functional theory optimization and data mining prediction to select most probable heterojunctional peers from hetero/homo- dimensions. Through facile but efficient wet and dry synthesis, nanostructures will be bonded to basal planes or brinks of 2D slabs. CATCH benefits in-house techniques for product characterizations and refinements and emphasizes on cutting-edge in situ studies to unveil photocatalysis at advanced photon sources. Assisted with theoretical modelling, ambient and time-evolved experiments will illustrate photocatalytic dynamics and kinetics in mixed spacetime.
CATCH unites low-dimensional materials designs by counting physical and electronic merits from spacetime confinements. It metrologically elaborates photocatalysis in an elevated 2D+nD+t, alters passages of materials combinations crossing dimensions, and directs future photocatalyst designs. Standing on cross-dimensional materials innovation and photocatalysis study, CATCH breaks the deadlock of practical photocatalysis that eventually leads to sustainability.
Max ERC Funding
1 999 946 €
Duration
Start date: 2021-05-01, End date: 2026-04-30
Project acronym CAVITYQPD
Project Cavity quantum phonon dynamics
Researcher (PI) Mika Antero Sillanpaeae
Host Institution (HI) AALTO KORKEAKOULUSAATIO SR
Country Finland
Call Details Consolidator Grant (CoG), PE3, ERC-2013-CoG
Summary "Large bodies usually follow the classical equations of motion. Deviations from this can be called
macroscopic quantum behavior. These phenomena have been experimentally verified with cavity Quantum
Electro Dynamics (QED), trapped ions, and superconducting Josephson junction systems. Recently, evidence
was obtained that also moving objects can display such behavior. These objects are micromechanical
resonators (MR), which can measure tens of microns in size and are hence quite macroscopic. The degree of
freedom is their vibrations: phonons.
I propose experimental research in order to push quantum mechanics closer to the classical world than ever
before. I will try find quantum behavior in the most classical objects, that is, slowly moving bodies. I will use
MR's, accessed via electrical resonators. Part of it will be in analogy to the previously studied macroscopic
systems, but with photons replaced by phonons. The experiments are done in a cryogenic temperature mostly
in dilution refrigerator. The work will open up new perspectives on how nature works, and can have
technological implications.
The first basic setup is the coupling of MR to microwave cavity resonators. This is a direct analogy to
optomechanics, and can be called circuit optomechanics. The goals will be phonon state transfer via a cavity
bus, construction of squeezed states and of phonon-cavity entanglement. The second setup is to boost the
optomechanical coupling with a Josephson junction system, and reach the single-phonon strong-coupling for
the first time. The third setup is the coupling of MR to a Josephson junction artificial atom. Here we will
access the MR same way as the motion of a trapped ions is coupled to their internal transitions. In this setup,
I am proposing to construct exotic quantum states of motion, and finally entangle and transfer phonons over
mm-distance via cavity-coupled qubits. I believe within the project it is possible to perform rudimentary Bell
measurement with phonons."
Summary
"Large bodies usually follow the classical equations of motion. Deviations from this can be called
macroscopic quantum behavior. These phenomena have been experimentally verified with cavity Quantum
Electro Dynamics (QED), trapped ions, and superconducting Josephson junction systems. Recently, evidence
was obtained that also moving objects can display such behavior. These objects are micromechanical
resonators (MR), which can measure tens of microns in size and are hence quite macroscopic. The degree of
freedom is their vibrations: phonons.
I propose experimental research in order to push quantum mechanics closer to the classical world than ever
before. I will try find quantum behavior in the most classical objects, that is, slowly moving bodies. I will use
MR's, accessed via electrical resonators. Part of it will be in analogy to the previously studied macroscopic
systems, but with photons replaced by phonons. The experiments are done in a cryogenic temperature mostly
in dilution refrigerator. The work will open up new perspectives on how nature works, and can have
technological implications.
The first basic setup is the coupling of MR to microwave cavity resonators. This is a direct analogy to
optomechanics, and can be called circuit optomechanics. The goals will be phonon state transfer via a cavity
bus, construction of squeezed states and of phonon-cavity entanglement. The second setup is to boost the
optomechanical coupling with a Josephson junction system, and reach the single-phonon strong-coupling for
the first time. The third setup is the coupling of MR to a Josephson junction artificial atom. Here we will
access the MR same way as the motion of a trapped ions is coupled to their internal transitions. In this setup,
I am proposing to construct exotic quantum states of motion, and finally entangle and transfer phonons over
mm-distance via cavity-coupled qubits. I believe within the project it is possible to perform rudimentary Bell
measurement with phonons."
Max ERC Funding
2 004 283 €
Duration
Start date: 2015-01-01, End date: 2019-12-31
Project acronym CeraText
Project Tailoring Microstructure and Architecture to Build Ceramic Components with Unprecedented Damage Tolerance
Researcher (PI) Raul BERMEJO
Host Institution (HI) MONTANUNIVERSITAET LEOBEN
Country Austria
Call Details Consolidator Grant (CoG), PE8, ERC-2018-COG
Summary Advanced ceramics are often combined with metals, polymers or other ceramics to produce structural and functional systems with exceptional properties. Examples are resistors and capacitors in microelectronics, piezo-ceramic actuators in car injection devices, and bio-implants for hip joint replacements. However, a critical issue affecting the functionality, lifetime and reliability of such systems is the initiation and uncontrolled propagation of cracks in the brittle ceramic parts, yielding in some cases rejection rates up to 70% of components production.
The remarkable “damage tolerance” found in natural materials such as wood, bone or mollusc, has yet to be achieved in technical ceramics, where incipient damage is synonymous with catastrophic failure. Novel “multilayer designs” combining microstructure and architecture could change this situation. Recent work of the PI has shown that tuning the location of “protective” layers within a 3D multilayer ceramic can increase its fracture resistance by five times (from ~3.5 to ~17 MPa∙m1/2) relative to constituent bulk ceramic layers, while retaining high strength (~500 MPa). By orienting the grain structure, similar to the textured and organized microstructure found in natural systems such as nacre, the PI has shown that crack propagation can be controlled within the textured ceramic layer. Thus, I believe tailored microstructures with controlled grain boundaries engineered in a layer-by-layer 3D architectural design hold the key to a new generation of “damage tolerant” ceramics.
This proposal outlines a research program to establish new scientific principles for the fabrication of innovative ceramic components that exhibit unprecedented damage tolerance. The successful implementation of microstructural features (e.g. texture degree, tailored internal stresses, second phases, interfaces) in a layer-by-layer architecture will provide outstanding lifetime and reliability in both structural and functional ceramic devices.
Summary
Advanced ceramics are often combined with metals, polymers or other ceramics to produce structural and functional systems with exceptional properties. Examples are resistors and capacitors in microelectronics, piezo-ceramic actuators in car injection devices, and bio-implants for hip joint replacements. However, a critical issue affecting the functionality, lifetime and reliability of such systems is the initiation and uncontrolled propagation of cracks in the brittle ceramic parts, yielding in some cases rejection rates up to 70% of components production.
The remarkable “damage tolerance” found in natural materials such as wood, bone or mollusc, has yet to be achieved in technical ceramics, where incipient damage is synonymous with catastrophic failure. Novel “multilayer designs” combining microstructure and architecture could change this situation. Recent work of the PI has shown that tuning the location of “protective” layers within a 3D multilayer ceramic can increase its fracture resistance by five times (from ~3.5 to ~17 MPa∙m1/2) relative to constituent bulk ceramic layers, while retaining high strength (~500 MPa). By orienting the grain structure, similar to the textured and organized microstructure found in natural systems such as nacre, the PI has shown that crack propagation can be controlled within the textured ceramic layer. Thus, I believe tailored microstructures with controlled grain boundaries engineered in a layer-by-layer 3D architectural design hold the key to a new generation of “damage tolerant” ceramics.
This proposal outlines a research program to establish new scientific principles for the fabrication of innovative ceramic components that exhibit unprecedented damage tolerance. The successful implementation of microstructural features (e.g. texture degree, tailored internal stresses, second phases, interfaces) in a layer-by-layer architecture will provide outstanding lifetime and reliability in both structural and functional ceramic devices.
Max ERC Funding
1 985 000 €
Duration
Start date: 2019-05-01, End date: 2024-04-30
Project acronym CITRES
Project Chemistry and interface tailored lead-free relaxor thin films for energy storage capacitors
Researcher (PI) Marco Deluca
Host Institution (HI) MATERIALS CENTER LEOBEN FORSCHUNG GMBH
Country Austria
Call Details Consolidator Grant (CoG), PE8, ERC-2018-COG
Summary The goal of CITRES is to provide new energy storage devices with high power and energy density by developing novel multilayer ceramic capacitors (MLCCs) based on relaxor thin films (RTF).
Energy storage units for energy autonomous sensor systems for the Internet of Things (IoT) must possess high power and energy density to allow quick charge/recharge and long-time energy supply. Current energy storage devices cannot meet those demands: Batteries have large capacity but long charging/discharging times due to slow chemical reactions and ion diffusion. Ceramic dielectric capacitors – being based on ionic and electronic polarisation mechanisms – can deliver and take up power quickly, but store much less energy due to low dielectric breakdown strength (DBS), high losses, and leakage currents.
RTF are ideal candidates: (i) Thin film processing allows obtaining low porosity and defects, thus enhancing the DBS; (ii) slim polarisation hysteresis loops, intrinsic to relaxors, allow reducing the losses. High energy density can be achieved in RTF by maximising the polarisation and minimising the leakage currents. Both aspects are controlled by the amount, type and local distribution of chemical substituents in the RTF lattice, whereas the latter depends also on the chemistry of the electrode metal.
In CITRES, we will identify the influence of substituents on electric polarisation from atomic to macroscopic scale by combining multiscale atomistic modelling with advanced structural, chemical and electrical characterizations on several length scales both in the RTF bulk and at interfaces with various electrodes. This will allow for the first time the design of energy storage properties of RTF by chemical substitution and electrode selection.
The ground-breaking nature of CITRES resides in the design and realisation of RTF-based dielectric MLCCs with better energy storage performances than supercapacitors and batteries, thus enabling energy autonomy for IoT sensor systems.
Summary
The goal of CITRES is to provide new energy storage devices with high power and energy density by developing novel multilayer ceramic capacitors (MLCCs) based on relaxor thin films (RTF).
Energy storage units for energy autonomous sensor systems for the Internet of Things (IoT) must possess high power and energy density to allow quick charge/recharge and long-time energy supply. Current energy storage devices cannot meet those demands: Batteries have large capacity but long charging/discharging times due to slow chemical reactions and ion diffusion. Ceramic dielectric capacitors – being based on ionic and electronic polarisation mechanisms – can deliver and take up power quickly, but store much less energy due to low dielectric breakdown strength (DBS), high losses, and leakage currents.
RTF are ideal candidates: (i) Thin film processing allows obtaining low porosity and defects, thus enhancing the DBS; (ii) slim polarisation hysteresis loops, intrinsic to relaxors, allow reducing the losses. High energy density can be achieved in RTF by maximising the polarisation and minimising the leakage currents. Both aspects are controlled by the amount, type and local distribution of chemical substituents in the RTF lattice, whereas the latter depends also on the chemistry of the electrode metal.
In CITRES, we will identify the influence of substituents on electric polarisation from atomic to macroscopic scale by combining multiscale atomistic modelling with advanced structural, chemical and electrical characterizations on several length scales both in the RTF bulk and at interfaces with various electrodes. This will allow for the first time the design of energy storage properties of RTF by chemical substitution and electrode selection.
The ground-breaking nature of CITRES resides in the design and realisation of RTF-based dielectric MLCCs with better energy storage performances than supercapacitors and batteries, thus enabling energy autonomy for IoT sensor systems.
Max ERC Funding
1 996 519 €
Duration
Start date: 2019-04-01, End date: 2024-03-31
Project acronym CrowdLand
Project Harnessing the power of crowdsourcing to improve land cover and land-use information
Researcher (PI) Steffen Martin Fritz
Host Institution (HI) INTERNATIONALES INSTITUT FUER ANGEWANDTE SYSTEMANALYSE
Country Austria
Call Details Consolidator Grant (CoG), SH3, ERC-2013-CoG
Summary Information about land cover, land use and the change over time is used for a wide range of applications such as nature protection and biodiversity, forest and water management, urban and transport planning, natural hazard prevention and mitigation, agricultural policies and monitoring climate change. Furthermore, high quality spatially explicit information on land cover change is an essential input variable to land use change modelling, which is increasingly being used to better understand the potential impact of certain policies. The amount of observed land cover change also serves as an important indicator of how well different regional, national and European policies have been implemented.
However, outside Europe and outside the developed world in particular, information on land cover and land cover change in poorer countries is hardly available and no national or regional dense sample based monitoring approaches such as LUCAS exists which deliver sufficiently accurate land cover and land cover change information. Moreover in particular in developing countries, there is no or very little information on land-use and crop management. Only very limited data available from FAO and an incomplete coverage of sub-national statistics (e.g. IFPRI) are available.
This research project will assess the potential of using crowdsourcing to close these big data gaps in developing and developed countries with a number of case studies and different data collection methods. The CrowdLand project will be carried out in two very different environments, i.e. Austria and Kenya.The overall research objectives of this project are to 1) test the potential of using social gaming to collect land use information 2) test the potential of using mobile money to collect data in developing countries 3) understand the data quality collected via crowdsourcing 4) apply advanced methods to filter crowdsourced data in order to attain improved accuracy.
Summary
Information about land cover, land use and the change over time is used for a wide range of applications such as nature protection and biodiversity, forest and water management, urban and transport planning, natural hazard prevention and mitigation, agricultural policies and monitoring climate change. Furthermore, high quality spatially explicit information on land cover change is an essential input variable to land use change modelling, which is increasingly being used to better understand the potential impact of certain policies. The amount of observed land cover change also serves as an important indicator of how well different regional, national and European policies have been implemented.
However, outside Europe and outside the developed world in particular, information on land cover and land cover change in poorer countries is hardly available and no national or regional dense sample based monitoring approaches such as LUCAS exists which deliver sufficiently accurate land cover and land cover change information. Moreover in particular in developing countries, there is no or very little information on land-use and crop management. Only very limited data available from FAO and an incomplete coverage of sub-national statistics (e.g. IFPRI) are available.
This research project will assess the potential of using crowdsourcing to close these big data gaps in developing and developed countries with a number of case studies and different data collection methods. The CrowdLand project will be carried out in two very different environments, i.e. Austria and Kenya.The overall research objectives of this project are to 1) test the potential of using social gaming to collect land use information 2) test the potential of using mobile money to collect data in developing countries 3) understand the data quality collected via crowdsourcing 4) apply advanced methods to filter crowdsourced data in order to attain improved accuracy.
Max ERC Funding
1 397 200 €
Duration
Start date: 2014-04-01, End date: 2020-03-31
Project acronym Des.solve
Project When solids become liquids: natural deep eutectic solvents for chemical process engineering
Researcher (PI) Ana Rita CRUZ DUARTE
Host Institution (HI) NOVA ID FCT - ASSOCIACAO PARA A INOVACAO E DESENVOLVIMENTO DA FCT
Country Portugal
Call Details Consolidator Grant (CoG), PE8, ERC-2016-COG
Summary Sugars, aminoacids or organic acids are typically solid at room temperature. Nonetheless when combined at a particular molar fraction they present a high melting point depression, becoming liquids at room temperature. These are called Natural Deep Eutectic Solvents – NADES. NADES are envisaged to play a major role on different chemical engineering processes in the future. Nonetheless, there is a significant lack of knowledge on fundamental and basic research on NADES, which is hindering their industrial applications. For this reason it is important to extend the knowledge on these systems, boosting their application development. NADES applications go beyond chemical or materials engineering and cover a wide range of fields from biocatalysis, extraction, electrochemistry, carbon dioxide capture or biomedical applications. Des.solve encompasses four major themes of research: 1 – Development of NADES and therapeutic deep eutectic solvents – THEDES; 2 – Characterization of the obtained mixtures and computer simulation of NADES/THEDES properties; 3 – Phase behaviour of binary/ternary systems NADES/THEDES + carbon dioxide and thermodynamic modelling 4 – Application development. Starting from the development of novel NADES/THEDES which, by different characterization techniques, will be deeply studied and characterized, the essential raw-materials will be produced for the subsequent research activities. The envisaged research involves modelling and molecular simulations. Des.solve will be deeply engaged in application development, particularly in extraction, biocatalysis and pharmaceutical/biomedical applications. The knowledge that will be created in this proposal is expected not only to have a major impact in the scientific community, but also in society, economy and industry.
Summary
Sugars, aminoacids or organic acids are typically solid at room temperature. Nonetheless when combined at a particular molar fraction they present a high melting point depression, becoming liquids at room temperature. These are called Natural Deep Eutectic Solvents – NADES. NADES are envisaged to play a major role on different chemical engineering processes in the future. Nonetheless, there is a significant lack of knowledge on fundamental and basic research on NADES, which is hindering their industrial applications. For this reason it is important to extend the knowledge on these systems, boosting their application development. NADES applications go beyond chemical or materials engineering and cover a wide range of fields from biocatalysis, extraction, electrochemistry, carbon dioxide capture or biomedical applications. Des.solve encompasses four major themes of research: 1 – Development of NADES and therapeutic deep eutectic solvents – THEDES; 2 – Characterization of the obtained mixtures and computer simulation of NADES/THEDES properties; 3 – Phase behaviour of binary/ternary systems NADES/THEDES + carbon dioxide and thermodynamic modelling 4 – Application development. Starting from the development of novel NADES/THEDES which, by different characterization techniques, will be deeply studied and characterized, the essential raw-materials will be produced for the subsequent research activities. The envisaged research involves modelling and molecular simulations. Des.solve will be deeply engaged in application development, particularly in extraction, biocatalysis and pharmaceutical/biomedical applications. The knowledge that will be created in this proposal is expected not only to have a major impact in the scientific community, but also in society, economy and industry.
Max ERC Funding
1 877 006 €
Duration
Start date: 2017-03-01, End date: 2022-02-28
