Project acronym 3D-QUEST
Project 3D-Quantum Integrated Optical Simulation
Researcher (PI) Fabio Sciarrino
Host Institution (HI) UNIVERSITA DEGLI STUDI DI ROMA LA SAPIENZA
Country Italy
Call Details Starting Grant (StG), PE2, ERC-2012-StG_20111012
Summary "Quantum information was born from the merging of classical information and quantum physics. Its main objective consists of understanding the quantum nature of information and learning how to process it by using physical systems which operate by following quantum mechanics laws. Quantum simulation is a fundamental instrument to investigate phenomena of quantum systems dynamics, such as quantum transport, particle localizations and energy transfer, quantum-to-classical transition, and even quantum improved computation, all tasks that are hard to simulate with classical approaches. Within this framework integrated photonic circuits have a strong potential to realize quantum information processing by optical systems.
The aim of 3D-QUEST is to develop and implement quantum simulation by exploiting 3-dimensional integrated photonic circuits. 3D-QUEST is structured to demonstrate the potential of linear optics to implement a computational power beyond the one of a classical computer. Such ""hard-to-simulate"" scenario is disclosed when multiphoton-multimode platforms are realized. The 3D-QUEST research program will focus on three tasks of growing difficulty.
A-1. To simulate bosonic-fermionic dynamics with integrated optical systems acting on 2 photon entangled states.
A-2. To pave the way towards hard-to-simulate, scalable quantum linear optical circuits by investigating m-port interferometers acting on n-photon states with n>2.
A-3. To exploit 3-dimensional integrated structures for the observation of new quantum optical phenomena and for the quantum simulation of more complex scenarios.
3D-QUEST will exploit the potential of the femtosecond laser writing integrated waveguides. This technique will be adopted to realize 3-dimensional capabilities and high flexibility, bringing in this way the optical quantum simulation in to new regime."
Summary
"Quantum information was born from the merging of classical information and quantum physics. Its main objective consists of understanding the quantum nature of information and learning how to process it by using physical systems which operate by following quantum mechanics laws. Quantum simulation is a fundamental instrument to investigate phenomena of quantum systems dynamics, such as quantum transport, particle localizations and energy transfer, quantum-to-classical transition, and even quantum improved computation, all tasks that are hard to simulate with classical approaches. Within this framework integrated photonic circuits have a strong potential to realize quantum information processing by optical systems.
The aim of 3D-QUEST is to develop and implement quantum simulation by exploiting 3-dimensional integrated photonic circuits. 3D-QUEST is structured to demonstrate the potential of linear optics to implement a computational power beyond the one of a classical computer. Such ""hard-to-simulate"" scenario is disclosed when multiphoton-multimode platforms are realized. The 3D-QUEST research program will focus on three tasks of growing difficulty.
A-1. To simulate bosonic-fermionic dynamics with integrated optical systems acting on 2 photon entangled states.
A-2. To pave the way towards hard-to-simulate, scalable quantum linear optical circuits by investigating m-port interferometers acting on n-photon states with n>2.
A-3. To exploit 3-dimensional integrated structures for the observation of new quantum optical phenomena and for the quantum simulation of more complex scenarios.
3D-QUEST will exploit the potential of the femtosecond laser writing integrated waveguides. This technique will be adopted to realize 3-dimensional capabilities and high flexibility, bringing in this way the optical quantum simulation in to new regime."
Max ERC Funding
1 474 800 €
Duration
Start date: 2012-08-01, End date: 2017-07-31
Project acronym A-LIFE
Project Absorbing aerosol layers in a changing climate: aging, lifetime and dynamics
Researcher (PI) Bernadett Barbara Weinzierl
Host Institution (HI) UNIVERSITAT WIEN
Country Austria
Call Details Starting Grant (StG), PE10, ERC-2014-STG
Summary Aerosols (i.e. tiny particles suspended in the air) are regularly transported in huge amounts over long distances impacting air quality, health, weather and climate thousands of kilometers downwind of the source. Aerosols affect the atmospheric radiation budget through scattering and absorption of solar radiation and through their role as cloud/ice nuclei.
In particular, light absorption by aerosol particles such as mineral dust and black carbon (BC; thought to be the second strongest contribution to current global warming after CO2) is of fundamental importance from a climate perspective because the presence of absorbing particles (1) contributes to solar radiative forcing, (2) heats absorbing aerosol layers, (3) can evaporate clouds and (4) change atmospheric dynamics.
Considering this prominent role of aerosols, vertically-resolved in-situ data on absorbing aerosols are surprisingly scarce and aerosol-dynamic interactions are poorly understood in general. This is, as recognized in the last IPCC report, a serious barrier for taking the accuracy of climate models and predictions to the next level. To overcome this barrier, I propose to investigate aging, lifetime and dynamics of absorbing aerosol layers with a holistic end-to-end approach including laboratory studies, airborne field experiments and numerical model simulations.
Building on the internationally recognized results of my aerosol research group and my long-term experience with airborne aerosol measurements, the time seems ripe to systematically bridge the gap between in-situ measurements of aerosol microphysical and optical properties and the assessment of dynamical interactions of absorbing particles with aerosol layer lifetime through model simulations.
The outcomes of this project will provide fundamental new understanding of absorbing aerosol layers in the climate system and important information for addressing the benefits of BC emission controls for mitigating climate change.
Summary
Aerosols (i.e. tiny particles suspended in the air) are regularly transported in huge amounts over long distances impacting air quality, health, weather and climate thousands of kilometers downwind of the source. Aerosols affect the atmospheric radiation budget through scattering and absorption of solar radiation and through their role as cloud/ice nuclei.
In particular, light absorption by aerosol particles such as mineral dust and black carbon (BC; thought to be the second strongest contribution to current global warming after CO2) is of fundamental importance from a climate perspective because the presence of absorbing particles (1) contributes to solar radiative forcing, (2) heats absorbing aerosol layers, (3) can evaporate clouds and (4) change atmospheric dynamics.
Considering this prominent role of aerosols, vertically-resolved in-situ data on absorbing aerosols are surprisingly scarce and aerosol-dynamic interactions are poorly understood in general. This is, as recognized in the last IPCC report, a serious barrier for taking the accuracy of climate models and predictions to the next level. To overcome this barrier, I propose to investigate aging, lifetime and dynamics of absorbing aerosol layers with a holistic end-to-end approach including laboratory studies, airborne field experiments and numerical model simulations.
Building on the internationally recognized results of my aerosol research group and my long-term experience with airborne aerosol measurements, the time seems ripe to systematically bridge the gap between in-situ measurements of aerosol microphysical and optical properties and the assessment of dynamical interactions of absorbing particles with aerosol layer lifetime through model simulations.
The outcomes of this project will provide fundamental new understanding of absorbing aerosol layers in the climate system and important information for addressing the benefits of BC emission controls for mitigating climate change.
Max ERC Funding
1 987 980 €
Duration
Start date: 2015-10-01, End date: 2021-09-30
Project acronym ABINITIODGA
Project Ab initio Dynamical Vertex Approximation
Researcher (PI) Karsten Held
Host Institution (HI) TECHNISCHE UNIVERSITAET WIEN
Country Austria
Call Details Starting Grant (StG), PE3, ERC-2012-StG_20111012
Summary Some of the most fascinating physical phenomena are experimentally observed in strongly correlated electron systems and, on the theoretical side, only poorly understood hitherto. The aim of the ERC project AbinitioDGA is the development, implementation and application of a new, 21th century method for the ab initio calculation of materials with such strong electronic correlations. AbinitioDGA includes strong electronic correlations on all time and length scales and hence is a big step beyond the state-of-the-art methods, such as the local density approximation, dynamical mean field theory, and the GW approach (Green function G times screened interaction W). It has the potential for an extraordinary high impact not only in the field of computational materials science but also for a better understanding of quantum critical heavy fermion systems, high-temperature superconductors, and transport through nano- and heterostructures. These four physical problems and related materials will be studied within the ERC project, besides the methodological development.
On the technical side, AbinitioDGA realizes Hedin's idea to include vertex corrections beyond the GW approximation. All vertex corrections which can be traced back to a fully irreducible local vertex and the bare non-local Coulomb interaction are included. This way, AbinitioDGA does not only contain the GW physics of screened exchange and the strong local correlations of dynamical mean field theory but also non-local correlations beyond on all length scales. Through the latter, AbinitioDGA can prospectively describe phenomena such as quantum criticality, spin-fluctuation mediated superconductivity, and weak localization corrections to the conductivity. Nonetheless, the computational effort is still manageable even for realistic materials calculations, making the considerable effort to implement AbinitioDGA worthwhile.
Summary
Some of the most fascinating physical phenomena are experimentally observed in strongly correlated electron systems and, on the theoretical side, only poorly understood hitherto. The aim of the ERC project AbinitioDGA is the development, implementation and application of a new, 21th century method for the ab initio calculation of materials with such strong electronic correlations. AbinitioDGA includes strong electronic correlations on all time and length scales and hence is a big step beyond the state-of-the-art methods, such as the local density approximation, dynamical mean field theory, and the GW approach (Green function G times screened interaction W). It has the potential for an extraordinary high impact not only in the field of computational materials science but also for a better understanding of quantum critical heavy fermion systems, high-temperature superconductors, and transport through nano- and heterostructures. These four physical problems and related materials will be studied within the ERC project, besides the methodological development.
On the technical side, AbinitioDGA realizes Hedin's idea to include vertex corrections beyond the GW approximation. All vertex corrections which can be traced back to a fully irreducible local vertex and the bare non-local Coulomb interaction are included. This way, AbinitioDGA does not only contain the GW physics of screened exchange and the strong local correlations of dynamical mean field theory but also non-local correlations beyond on all length scales. Through the latter, AbinitioDGA can prospectively describe phenomena such as quantum criticality, spin-fluctuation mediated superconductivity, and weak localization corrections to the conductivity. Nonetheless, the computational effort is still manageable even for realistic materials calculations, making the considerable effort to implement AbinitioDGA worthwhile.
Max ERC Funding
1 491 090 €
Duration
Start date: 2013-01-01, End date: 2018-07-31
Project acronym ACTIVENP
Project Active and low loss nano photonics (ActiveNP)
Researcher (PI) Thomas Arno Klar
Host Institution (HI) UNIVERSITAT LINZ
Country Austria
Call Details Starting Grant (StG), PE3, ERC-2010-StG_20091028
Summary This project aims at designing novel hybrid nanophotonic devices comprising metallic nanostructures and active elements such as dye molecules or colloidal quantum dots. Three core objectives, each going far beyond the state of the art, shall be tackled: (i) Metamaterials containing gain materials: Metamaterials introduce magnetism to the optical frequency range and hold promise to create entirely novel devices for light manipulation. Since present day metamaterials are extremely absorptive, it is of utmost importance to fight losses. The ground-breaking approach of this proposal is to incorporate fluorescing species into the nanoscale metallic metastructures in order to compensate losses by stimulated emission. (ii) The second objective exceeds the ansatz of compensating losses and will reach out for lasing action. Individual metallic nanostructures such as pairs of nanoparticles will form novel and unusual nanometre sized resonators for laser action. State of the art microresonators still have a volume of at least half of the wavelength cubed. Noble metal nanoparticle resonators scale down this volume by a factor of thousand allowing for truly nanoscale coherent light sources. (iii) A third objective concerns a substantial improvement of nonlinear effects. This will be accomplished by drastically sharpened resonances of nanoplasmonic devices surrounded by active gain materials. An interdisciplinary team of PhD students and a PostDoc will be assembled, each scientist being uniquely qualified to cover one of the expertise fields: Design, spectroscopy, and simulation. The project s outcome is twofold: A substantial expansion of fundamental understanding of nanophotonics and practical devices such as nanoscopic lasers and low loss metamaterials.
Summary
This project aims at designing novel hybrid nanophotonic devices comprising metallic nanostructures and active elements such as dye molecules or colloidal quantum dots. Three core objectives, each going far beyond the state of the art, shall be tackled: (i) Metamaterials containing gain materials: Metamaterials introduce magnetism to the optical frequency range and hold promise to create entirely novel devices for light manipulation. Since present day metamaterials are extremely absorptive, it is of utmost importance to fight losses. The ground-breaking approach of this proposal is to incorporate fluorescing species into the nanoscale metallic metastructures in order to compensate losses by stimulated emission. (ii) The second objective exceeds the ansatz of compensating losses and will reach out for lasing action. Individual metallic nanostructures such as pairs of nanoparticles will form novel and unusual nanometre sized resonators for laser action. State of the art microresonators still have a volume of at least half of the wavelength cubed. Noble metal nanoparticle resonators scale down this volume by a factor of thousand allowing for truly nanoscale coherent light sources. (iii) A third objective concerns a substantial improvement of nonlinear effects. This will be accomplished by drastically sharpened resonances of nanoplasmonic devices surrounded by active gain materials. An interdisciplinary team of PhD students and a PostDoc will be assembled, each scientist being uniquely qualified to cover one of the expertise fields: Design, spectroscopy, and simulation. The project s outcome is twofold: A substantial expansion of fundamental understanding of nanophotonics and practical devices such as nanoscopic lasers and low loss metamaterials.
Max ERC Funding
1 494 756 €
Duration
Start date: 2010-10-01, End date: 2015-09-30
Project acronym AGEnTh
Project Atomic Gauge and Entanglement Theories
Researcher (PI) Marcello DALMONTE
Host Institution (HI) SCUOLA INTERNAZIONALE SUPERIORE DI STUDI AVANZATI DI TRIESTE
Country Italy
Call Details Starting Grant (StG), PE2, ERC-2017-STG
Summary AGEnTh is an interdisciplinary proposal which aims at theoretically investigating atomic many-body systems (cold atoms and trapped ions) in close connection to concepts from quantum information, condensed matter, and high energy physics. The main goals of this programme are to:
I) Find to scalable schemes for the measurements of entanglement properties, and in particular entanglement spectra, by proposing a shifting paradigm to access entanglement focused on entanglement Hamiltonians and field theories instead of probing density matrices;
II) Show how atomic gauge theories (including dynamical gauge fields) are ideal candidates for the realization of long-sought, highly-entangled states of matter, in particular topological superconductors supporting parafermion edge modes, and novel classes of quantum spin liquids emerging from clustering;
III) Develop new implementation strategies for the realization of gauge symmetries of paramount importance, such as discrete and SU(N)xSU(2)xU(1) groups, and establish a theoretical framework for the understanding of atomic physics experiments within the light-from-chaos scenario pioneered in particle physics.
These objectives are at the cutting-edge of fundamental science, and represent a coherent effort aimed at underpinning unprecedented regimes of strongly interacting quantum matter by addressing the basic aspects of probing, many-body physics, and implementations. The results are expected to (i) build up and establish qualitatively new synergies between the aforementioned communities, and (ii) stimulate an intense theoretical and experimental activity focused on both entanglement and atomic gauge theories.
In order to achieve those, AGEnTh builds: (1) on my background working at the interface between atomic physics and quantum optics from one side, and many-body theory on the other, and (2) on exploratory studies which I carried out to mitigate the conceptual risks associated with its high-risk/high-gain goals.
Summary
AGEnTh is an interdisciplinary proposal which aims at theoretically investigating atomic many-body systems (cold atoms and trapped ions) in close connection to concepts from quantum information, condensed matter, and high energy physics. The main goals of this programme are to:
I) Find to scalable schemes for the measurements of entanglement properties, and in particular entanglement spectra, by proposing a shifting paradigm to access entanglement focused on entanglement Hamiltonians and field theories instead of probing density matrices;
II) Show how atomic gauge theories (including dynamical gauge fields) are ideal candidates for the realization of long-sought, highly-entangled states of matter, in particular topological superconductors supporting parafermion edge modes, and novel classes of quantum spin liquids emerging from clustering;
III) Develop new implementation strategies for the realization of gauge symmetries of paramount importance, such as discrete and SU(N)xSU(2)xU(1) groups, and establish a theoretical framework for the understanding of atomic physics experiments within the light-from-chaos scenario pioneered in particle physics.
These objectives are at the cutting-edge of fundamental science, and represent a coherent effort aimed at underpinning unprecedented regimes of strongly interacting quantum matter by addressing the basic aspects of probing, many-body physics, and implementations. The results are expected to (i) build up and establish qualitatively new synergies between the aforementioned communities, and (ii) stimulate an intense theoretical and experimental activity focused on both entanglement and atomic gauge theories.
In order to achieve those, AGEnTh builds: (1) on my background working at the interface between atomic physics and quantum optics from one side, and many-body theory on the other, and (2) on exploratory studies which I carried out to mitigate the conceptual risks associated with its high-risk/high-gain goals.
Max ERC Funding
1 055 317 €
Duration
Start date: 2018-05-01, End date: 2023-04-30
Project acronym AISENS
Project New generation of high sensitive atom interferometers
Researcher (PI) Marco Fattori
Host Institution (HI) CONSIGLIO NAZIONALE DELLE RICERCHE
Country Italy
Call Details Starting Grant (StG), PE2, ERC-2010-StG_20091028
Summary Interferometers are fundamental tools for the study of nature laws and for the precise measurement and control of the physical world. In the last century, the scientific and technological progress has proceeded in parallel with a constant improvement of interferometric performances. For this reason, the challenge of conceiving and realizing new generations of interferometers with broader ranges of operation and with higher sensitivities is always open and actual.
Despite the introduction of laser devices has deeply improved the way of developing and performing interferometric measurements with light, the atomic matter wave analogous, i.e. the Bose-Einstein condensate (BEC), has not yet triggered any revolution in precision interferometry. However, thanks to recent improvements on the control of the quantum properties of ultra-cold atomic gases, and new original ideas on the creation and manipulation of quantum entangled particles, the field of atom interferometry is now mature to experience a big step forward.
The system I want to realize is a Mach-Zehnder spatial interferometer operating with trapped BECs. Undesired decoherence sources will be suppressed by implementing BECs with tunable interactions in ultra-stable optical potentials. Entangled states will be used to improve the sensitivity of the sensor beyond the standard quantum limit to ideally reach the ultimate, Heisenberg, limit set by quantum mechanics. The resulting apparatus will show unprecedented spatial resolution and will overcome state-of-the-art interferometers with cold (non condensed) atomic gases.
A successful completion of this project will lead to a new generation of interferometers for the immediate application to local inertial measurements with unprecedented resolution. In addition, we expect to develop experimental capabilities which might find application well beyond quantum interferometry and crucially contribute to the broader emerging field of quantum-enhanced technologies.
Summary
Interferometers are fundamental tools for the study of nature laws and for the precise measurement and control of the physical world. In the last century, the scientific and technological progress has proceeded in parallel with a constant improvement of interferometric performances. For this reason, the challenge of conceiving and realizing new generations of interferometers with broader ranges of operation and with higher sensitivities is always open and actual.
Despite the introduction of laser devices has deeply improved the way of developing and performing interferometric measurements with light, the atomic matter wave analogous, i.e. the Bose-Einstein condensate (BEC), has not yet triggered any revolution in precision interferometry. However, thanks to recent improvements on the control of the quantum properties of ultra-cold atomic gases, and new original ideas on the creation and manipulation of quantum entangled particles, the field of atom interferometry is now mature to experience a big step forward.
The system I want to realize is a Mach-Zehnder spatial interferometer operating with trapped BECs. Undesired decoherence sources will be suppressed by implementing BECs with tunable interactions in ultra-stable optical potentials. Entangled states will be used to improve the sensitivity of the sensor beyond the standard quantum limit to ideally reach the ultimate, Heisenberg, limit set by quantum mechanics. The resulting apparatus will show unprecedented spatial resolution and will overcome state-of-the-art interferometers with cold (non condensed) atomic gases.
A successful completion of this project will lead to a new generation of interferometers for the immediate application to local inertial measurements with unprecedented resolution. In addition, we expect to develop experimental capabilities which might find application well beyond quantum interferometry and crucially contribute to the broader emerging field of quantum-enhanced technologies.
Max ERC Funding
1 068 000 €
Duration
Start date: 2011-01-01, End date: 2015-12-31
Project acronym ANGULON
Project Angulon: physics and applications of a new quasiparticle
Researcher (PI) Mikhail Lemeshko
Host Institution (HI) INSTITUTE OF SCIENCE AND TECHNOLOGY AUSTRIA
Country Austria
Call Details Starting Grant (StG), PE3, ERC-2018-STG
Summary This project aims to develop a universal approach to angular momentum in quantum many-body systems based on the angulon quasiparticle recently discovered by the PI. We will establish a general theory of angulons in and out of equilibrium, and apply it to a variety of experimentally studied problems, ranging from chemical dynamics in solvents to solid-state systems (e.g. angular momentum transfer in the Einstein-de Haas effect and ultrafast magnetism).
The concept of angular momentum is ubiquitous across physics, whether one deals with nuclear collisions, chemical reactions, or formation of galaxies. In the microscopic world, quantum rotations are described by non-commuting operators. This makes the angular momentum theory extremely involved, even for systems consisting of only a few interacting particles, such as gas-phase atoms or molecules.
Furthermore, in most experiments the behavior of quantum particles is inevitably altered by a many-body environment of some kind. For example, molecular rotation – and therefore reactivity – depends on the presence of a solvent, electronic angular momentum in solids is coupled to lattice phonons, highly excited atomic levels can be perturbed by a surrounding ultracold gas. If approached in a brute-force fashion, understanding angular momentum in such systems is an impossible task, since a macroscopic number of particles is involved.
Recently, the PI and his team have shown that this challenge can be met by introducing a new quasiparticle – the angulon. In 2017, the PI has demonstrated the existence of angulons by comparing his theory with 20 years of measurements on molecules rotating in superfluids. Most importantly, the angulon concept allows one to gain analytical insights inaccessible to the state-of-the-art techniques of condensed matter and chemical physics. The angulon approach holds the promise of opening up a new interdisciplinary research area with applications reaching far beyond what is proposed here.
Summary
This project aims to develop a universal approach to angular momentum in quantum many-body systems based on the angulon quasiparticle recently discovered by the PI. We will establish a general theory of angulons in and out of equilibrium, and apply it to a variety of experimentally studied problems, ranging from chemical dynamics in solvents to solid-state systems (e.g. angular momentum transfer in the Einstein-de Haas effect and ultrafast magnetism).
The concept of angular momentum is ubiquitous across physics, whether one deals with nuclear collisions, chemical reactions, or formation of galaxies. In the microscopic world, quantum rotations are described by non-commuting operators. This makes the angular momentum theory extremely involved, even for systems consisting of only a few interacting particles, such as gas-phase atoms or molecules.
Furthermore, in most experiments the behavior of quantum particles is inevitably altered by a many-body environment of some kind. For example, molecular rotation – and therefore reactivity – depends on the presence of a solvent, electronic angular momentum in solids is coupled to lattice phonons, highly excited atomic levels can be perturbed by a surrounding ultracold gas. If approached in a brute-force fashion, understanding angular momentum in such systems is an impossible task, since a macroscopic number of particles is involved.
Recently, the PI and his team have shown that this challenge can be met by introducing a new quasiparticle – the angulon. In 2017, the PI has demonstrated the existence of angulons by comparing his theory with 20 years of measurements on molecules rotating in superfluids. Most importantly, the angulon concept allows one to gain analytical insights inaccessible to the state-of-the-art techniques of condensed matter and chemical physics. The angulon approach holds the promise of opening up a new interdisciplinary research area with applications reaching far beyond what is proposed here.
Max ERC Funding
1 499 588 €
Duration
Start date: 2019-02-01, End date: 2024-01-31
Project acronym AQSuS
Project Analog Quantum Simulation using Superconducting Qubits
Researcher (PI) Gerhard KIRCHMAIR
Host Institution (HI) UNIVERSITAET INNSBRUCK
Country Austria
Call Details Starting Grant (StG), PE3, ERC-2016-STG
Summary AQSuS aims at experimentally implementing analogue quantum simulation of interacting spin models in two-dimensional geometries. The proposed experimental approach paves the way to investigate a broad range of currently inaccessible quantum phenomena, for which existing analytical and numerical methods reach their limitations. Developing precisely controlled interacting quantum systems in 2D is an important current goal well beyond the field of quantum simulation and has applications in e.g. solid state physics, computing and metrology.
To access these models, I propose to develop a novel circuit quantum-electrodynamics (cQED) platform based on the 3D transmon qubit architecture. This platform utilizes the highly engineerable properties and long coherence times of these qubits. A central novel idea behind AQSuS is to exploit the spatial dependence of the naturally occurring dipolar interactions between the qubits to engineer the desired spin-spin interactions. This approach avoids the complicated wiring, typical for other cQED experiments and reduces the complexity of the experimental setup. The scheme is therefore directly scalable to larger systems. The experimental goals are:
1) Demonstrate analogue quantum simulation of an interacting spin system in 1D & 2D.
2) Establish methods to precisely initialize the state of the system, control the interactions and readout single qubit states and multi-qubit correlations.
3) Investigate unobserved quantum phenomena on 2D geometries e.g. kagome and triangular lattices.
4) Study open system dynamics with interacting spin systems.
AQSuS builds on my backgrounds in both superconducting qubits and quantum simulation with trapped-ions. With theory collaborators my young research group and I have recently published an article in PRB [9] describing and analysing the proposed platform. The ERC starting grant would allow me to open a big new research direction and capitalize on the foundations established over the last two years.
Summary
AQSuS aims at experimentally implementing analogue quantum simulation of interacting spin models in two-dimensional geometries. The proposed experimental approach paves the way to investigate a broad range of currently inaccessible quantum phenomena, for which existing analytical and numerical methods reach their limitations. Developing precisely controlled interacting quantum systems in 2D is an important current goal well beyond the field of quantum simulation and has applications in e.g. solid state physics, computing and metrology.
To access these models, I propose to develop a novel circuit quantum-electrodynamics (cQED) platform based on the 3D transmon qubit architecture. This platform utilizes the highly engineerable properties and long coherence times of these qubits. A central novel idea behind AQSuS is to exploit the spatial dependence of the naturally occurring dipolar interactions between the qubits to engineer the desired spin-spin interactions. This approach avoids the complicated wiring, typical for other cQED experiments and reduces the complexity of the experimental setup. The scheme is therefore directly scalable to larger systems. The experimental goals are:
1) Demonstrate analogue quantum simulation of an interacting spin system in 1D & 2D.
2) Establish methods to precisely initialize the state of the system, control the interactions and readout single qubit states and multi-qubit correlations.
3) Investigate unobserved quantum phenomena on 2D geometries e.g. kagome and triangular lattices.
4) Study open system dynamics with interacting spin systems.
AQSuS builds on my backgrounds in both superconducting qubits and quantum simulation with trapped-ions. With theory collaborators my young research group and I have recently published an article in PRB [9] describing and analysing the proposed platform. The ERC starting grant would allow me to open a big new research direction and capitalize on the foundations established over the last two years.
Max ERC Funding
1 498 515 €
Duration
Start date: 2017-04-01, End date: 2022-03-31
Project acronym AuDACE
Project Attosecond Dynamics in Advanced Materials
Researcher (PI) Matteo LUCCHINI
Host Institution (HI) POLITECNICO DI MILANO
Country Italy
Call Details Starting Grant (StG), PE2, ERC-2019-STG
Summary Speed and performances of contemporary digital electronics are limited by the available device architectures and heat dissipation. Two-dimensional (2D) materials are emerging as one of the main candidates for designing new structures capable to overcome the current device limitations and foster the establishment of the electronics of the future. Due to the electron confinement in two directions, they are characterised by exotic physical, electronic and chemical properties, which are neither fully investigated nor understood. In particular, the lack of suitable tools hinders the possibility to study the ultrafast processes unfolding during light-matter interaction. Nevertheless, a clear understanding is required in order to leverage the unique properties of 2D materials. AuDACE aims to enter this unexplored region and investigate ultrafast electron, exciton and spin dynamics happening in advanced materials on time scales below few femtoseconds with unprecedented and ground-breaking possible outcome.
To reach this ambitious goal AuDACE will go beyond the state of the art and develop an innovative pump-probe beamline for transient absorption and reflectivity measurements based on arbitrarily polarised attosecond pulses in a two-foci geometry. Once the experimental techniques are established, my team and I will concentrate on ultrafast exciton dynamics in monolayer transition metal dichalcogenides (ML-TMDCs). In the final phase, AuDACE will focus on a new class of materials such as ferromagnetic ML-TMDCs to investigate the elusive physical mechanism responsible for ultrafast spin and magnetic dynamics. For the first time, a comprehensive investigation of these phenomena will become feasible on these little studied time scales. Due to the wide spectrum of relevant applications for 2D materials, I expect the outcome of AuDACE to have a crucial impact on the development of many key technological areas like optoelectronics, spintronics, valleytronics and photovoltaics.
Summary
Speed and performances of contemporary digital electronics are limited by the available device architectures and heat dissipation. Two-dimensional (2D) materials are emerging as one of the main candidates for designing new structures capable to overcome the current device limitations and foster the establishment of the electronics of the future. Due to the electron confinement in two directions, they are characterised by exotic physical, electronic and chemical properties, which are neither fully investigated nor understood. In particular, the lack of suitable tools hinders the possibility to study the ultrafast processes unfolding during light-matter interaction. Nevertheless, a clear understanding is required in order to leverage the unique properties of 2D materials. AuDACE aims to enter this unexplored region and investigate ultrafast electron, exciton and spin dynamics happening in advanced materials on time scales below few femtoseconds with unprecedented and ground-breaking possible outcome.
To reach this ambitious goal AuDACE will go beyond the state of the art and develop an innovative pump-probe beamline for transient absorption and reflectivity measurements based on arbitrarily polarised attosecond pulses in a two-foci geometry. Once the experimental techniques are established, my team and I will concentrate on ultrafast exciton dynamics in monolayer transition metal dichalcogenides (ML-TMDCs). In the final phase, AuDACE will focus on a new class of materials such as ferromagnetic ML-TMDCs to investigate the elusive physical mechanism responsible for ultrafast spin and magnetic dynamics. For the first time, a comprehensive investigation of these phenomena will become feasible on these little studied time scales. Due to the wide spectrum of relevant applications for 2D materials, I expect the outcome of AuDACE to have a crucial impact on the development of many key technological areas like optoelectronics, spintronics, valleytronics and photovoltaics.
Max ERC Funding
1 466 250 €
Duration
Start date: 2020-02-01, End date: 2025-01-31
Project acronym B3YOND
Project Beyond nanofabrication via nanoscale phase engineering of matter
Researcher (PI) Edoardo ALBISETTI
Host Institution (HI) POLITECNICO DI MILANO
Country Italy
Call Details Starting Grant (StG), PE8, ERC-2020-STG
Summary B3YOND proposes a radically new approach to nanofabrication, based on using sub-10 nm confined thermal reactions for patterning and manipulating the physical properties of materials with unprecedented tunability and resolution. Throughout the past decades, the progress in micro- and nano-fabrication techniques has been one of the most powerful and ubiquitous driving forces in science and technology. Nowadays, conventional approaches to nanofabrication reached the fundamental physical limits for the downscaling of devices, so that the search for groundbreaking new paradigms has become vital for enabling significant technological advancement. This project aims to go substantially beyond conventional nanofabrication approaches, through the following ambitious research objectives:
1) Demonstrate a radically new approach to nanofabrication, phase-nanoengineering, based on directly crafting at the nanoscale the physical properties of thin-film materials, by using the recently developed thermally assisted scanning probe lithography (t-SPL) technique for producing highly localized and tunable thermally-induced phase changes.
2) Develop a new class of artificial nanomaterials with unprecedented electronic transport properties, which arise from the proximity and coexistence of different structural and electronic phases, tailored at the nanoscale.
3) Realize novel monolithic three-dimensional nanoelectronic platforms for beyond-CMOS computing, by exploiting the unique capabilities of t-SPL for obtaining sub-10 nm resolution patterning in three-dimensions.
By combining, in a highly multidisciplinary approach, some of the most promising recent advances in materials science, with the tremendous potential of t-SPL, this challenging project will enable disruptive conceptual and technological breakthroughs, beyond the conventional paradigms of nanofabrication.
Summary
B3YOND proposes a radically new approach to nanofabrication, based on using sub-10 nm confined thermal reactions for patterning and manipulating the physical properties of materials with unprecedented tunability and resolution. Throughout the past decades, the progress in micro- and nano-fabrication techniques has been one of the most powerful and ubiquitous driving forces in science and technology. Nowadays, conventional approaches to nanofabrication reached the fundamental physical limits for the downscaling of devices, so that the search for groundbreaking new paradigms has become vital for enabling significant technological advancement. This project aims to go substantially beyond conventional nanofabrication approaches, through the following ambitious research objectives:
1) Demonstrate a radically new approach to nanofabrication, phase-nanoengineering, based on directly crafting at the nanoscale the physical properties of thin-film materials, by using the recently developed thermally assisted scanning probe lithography (t-SPL) technique for producing highly localized and tunable thermally-induced phase changes.
2) Develop a new class of artificial nanomaterials with unprecedented electronic transport properties, which arise from the proximity and coexistence of different structural and electronic phases, tailored at the nanoscale.
3) Realize novel monolithic three-dimensional nanoelectronic platforms for beyond-CMOS computing, by exploiting the unique capabilities of t-SPL for obtaining sub-10 nm resolution patterning in three-dimensions.
By combining, in a highly multidisciplinary approach, some of the most promising recent advances in materials science, with the tremendous potential of t-SPL, this challenging project will enable disruptive conceptual and technological breakthroughs, beyond the conventional paradigms of nanofabrication.
Max ERC Funding
1 498 385 €
Duration
Start date: 2021-02-01, End date: 2026-01-31
