ERC FUNDED PROJECTS

The realization of high-performance micro-supercapacitors is currently a big challenge but the ineluctable applications requiring such miniaturized energy storage devices are continuously emerging, from wearable electronic gadgets to wireless sensor networks. Although they store less energy than micro-batteries, micro-supercapacitors can be charged and discharged very rapidly and exhibit a quasi-unlimited lifetime. The global scientific research is consequently largely focused on the improvement of their capacitance and energetic performances. However, to date, they are still far from being able to power sensors or electronic components. Here I propose a 3D paradigm shift of micro-supercapacitor design to ensure increased energy storage capacities. Hydrous ruthenium dioxide (RuO2) is a pseudocapacitive material for supercapacitor electrode well-known for its high capacitance. A thin-film of ruthenium will be deposited by atomic layer deposition (ALD), followed by an electrochemical oxidation process, onto a high-surface-area 3D current collector prepared via an ingenious dynamic template built with hydrogen bubbles. The structural features of these 3D architectures will be controllably tailored by the processing methodologies. These electrodes will be combined with an innovative electrolyte in solid form (a protic ionogel) able to operate over an extended cell voltage. In a parallel investigation, we will develop a fundamental understanding of electrochemical reactions occurring at the nanoscale with a FIB-patterned (Focused Ion Beam) RuO2 nano-supercapacitor. The resulting 3D micro-supercapacitors should display extremely high power, long lifetime and – for the first time – energy densities competing or even exceeding that of micro-batteries. As a key achievement, prototypes will be designed using a new concept based on a self-adaptative micro-supercapacitors matrix, which arranges itself according to the global amount of energy stored.

1 673 438 €

Start date: 2018-04-01, End date: 2023-03-31

Homologous recombination (HR) is a conserved DNA double-strand breaks (DSB) repair pathway that uniquely uses an intact DNA molecule as a template. Genome-wide homology search is carried out by a nucleoprotein filament (NPF) assembled on the ssDNA flanking the DSB, and whose product is a “D-loop” joint molecule. Beyond accurate DSB repair, this capacity of HR to spatially associates homologous molecules is also harnessed for homolog pairing in meiosis. The goal of “3D-loop” is to tackle two long lasting conundrums: the fundamental homology search mechanism that achieves accurate and efficient identification of a single homologous donor in the vastness of the genome and nucleus, and how this mechanism is adapted for the purpose of homologs attachment in meiosis. I overcame the main hurdle to study these core steps of HR by developing a suite of proximity ligation-based methodologies and experimental systems to physically detect joint molecules in yeast cells. It revealed elaborate regulation controlling D-loop dynamics and a novel class of joint molecules. This proposal builds upon these methodologies and findings to first address basic properties of the homology sampling process by the NPF and the role of D-loop dynamics, with the long-term goal to establish a quantitative framework of homology search in mitotic cells (WP1). Second, the meiosis-specific regulation of homology search leading to homolog pairing likely integrates chromosomal-scale information. Genome re-synthesis and engineering approaches will be deployed to (i) achieve a quantitative and dynamic cartography of the cytological and molecular events of meiosis over a large chromosomal region, (ii) probe cis-acting regulations at the chromosomal scale, and (iii) revisit the molecular paradigm for crossover formation (WP2). We expect this project to shed light on the fundamental process of homology search and its involvement in the chromosome pairing phenomenon lying at the basis of sexual reproduction.

1 499 779 €

Start date: 2020-01-01, End date: 2024-12-31

Nanostructures drive the world around us. Every modern electronic device contains integrated circuits and nano-electronics to provide its functionality. Advances in nanotechnology directly impact society by enabling smartphones, autonomous devices, the internet of things, data storage, and essentially all forms of advanced technology. Fabricating such nanostructures crucially depends on having the tools to make them visible without destroying them. Modern nanodevices often have complex three-dimensional architectures with small features in all dimensions. While imaging methods that achieve nanometer-scale resolution exist, there are currently no compact tools that can look inside 3D nanostructures made out of metals and semiconductors without damaging their delicate internal structure. I will address this challenge by developing compact tools to image 3D nanostructures in a non-invasive way. Even though most nanostructures are completely opaque to visible light, I will develop light-based methods, combined with computational imaging techniques developed in my previous ERC project, to look inside them with unprecedented resolution and contrast. Light-based imaging is unparalleled in speed and versatility, and allows contact-free detection. My proposal is to: 1) Use compact laser-produced soft-X-ray sources to image nanostructures with high 3D resolution and element-sensitive contrast; 2) Use laser-induced ultrasound pulses to image complex 3D nanostructures, even through strongly absorbing materials; 3) Employ computational imaging methods to reconstruct high-resolution 3D object images from the resulting complex diffraction signals. I will forge a coordinated research program to bring these concepts to reality. This program provides exciting prospects for fundamental science and industrial metrology. I will go beyond the state-of-the-art in nano-imaging, to extend our vision into the complex interior of the smallest structures found in science and technology.

2 000 000 €

Start date: 2020-10-01, End date: 2025-09-30

Currently fuels, plastics, and drugs are predominantly manufactured from oil. A transition towards renewable resources critically depends on new catalysts, for instance to convert small molecules (such as solar or biomass derived hydrogen, carbon monoxide, water and carbon dioxide) into more complex ones (such as oxygenates, containing oxygen atoms in their structure). Catalyst development now often depends on trial and error rather than rational design, as the heterogeneity of these composite systems hampers detailed understanding of the role of each of the components. I propose 3D model catalysts as a novel enabling tool to overcome this problem. Their well-defined nature allows unprecedented precision in the variation of structural parameters (morphology, spatial distribution) of the individual components, while at the same time they mimic real catalysts closely enough to allow testing under industrially relevant conditions. Using this approach I will address fundamental questions, such as: * What are the mechanisms (structural, electronic, chemical) by which non-metal promoters influence the functionality of copper-based catalysts? * Which nanoalloys can be formed, how does their composition influence the surface active sites and catalytic functionality under reaction conditions? * Which size and interface effects occur, and how can we use them to tune the actitivity and selectivity towards desired products? Our 3D model catalysts will be assembled from ordered mesoporous silica and carbon support materials and Cu-based promoted and bimetallic nanoparticles. The combination with high resolution characterization and testing under realistic conditions allows detailed insight into the role of the different components; critical for the rational design of novel catalysts for a future more sustainable production of chemicals and fuels from renewable resources.

1 999 625 €

Start date: 2015-09-01, End date: 2020-11-30