Project acronym ACCELERATES
Project Acceleration in Extreme Shocks: from the microphysics to laboratory and astrophysics scenarios
Researcher (PI) Luis Miguel De Oliveira E Silva
Host Institution (HI) INSTITUTO SUPERIOR TECNICO
Country Portugal
Call Details Advanced Grant (AdG), PE2, ERC-2010-AdG_20100224
Summary What is the origin of cosmic rays, what are the dominant acceleration mechanisms in relativistic shocks, how do cosmic rays self-consistently influence the shock dynamics, how are relativistic collisionless shocks formed are longstanding scientific questions, closely tied to extreme plasma physics processes, and where a close interplay between the micro-instabilities and the global dynamics is critical.
Relativistic shocks are closely connected with the propagation of intense streams of particles pervasive in many astrophysical scenarios. The possibility of exciting shocks in the laboratory will also be available very soon with multi-PW lasers or intense relativistic particle beams.
Computational modeling is now established as a prominent research tool, by enabling the fully kinetic modeling of these systems for the first time. With the fast paced developments in high performance computing, the time is ripe for a focused research programme on simulation-based studies of relativistic shocks. This proposal therefore focuses on using self-consistent ab initio massively parallel simulations to study the physics of relativistic shocks, bridging the gap between the multidimensional microphysics of shock onset, formation, and propagation and the global system dynamics. Particular focus will be given to the shock acceleration mechanisms and the radiation signatures of the various physical processes, with the goal of solving some of the central questions in plasma/relativistic phenomena in astrophysics and in the laboratory, and opening new avenues between theoretical/massive computational studies, laboratory experiments and astrophysical observations.
Summary
What is the origin of cosmic rays, what are the dominant acceleration mechanisms in relativistic shocks, how do cosmic rays self-consistently influence the shock dynamics, how are relativistic collisionless shocks formed are longstanding scientific questions, closely tied to extreme plasma physics processes, and where a close interplay between the micro-instabilities and the global dynamics is critical.
Relativistic shocks are closely connected with the propagation of intense streams of particles pervasive in many astrophysical scenarios. The possibility of exciting shocks in the laboratory will also be available very soon with multi-PW lasers or intense relativistic particle beams.
Computational modeling is now established as a prominent research tool, by enabling the fully kinetic modeling of these systems for the first time. With the fast paced developments in high performance computing, the time is ripe for a focused research programme on simulation-based studies of relativistic shocks. This proposal therefore focuses on using self-consistent ab initio massively parallel simulations to study the physics of relativistic shocks, bridging the gap between the multidimensional microphysics of shock onset, formation, and propagation and the global system dynamics. Particular focus will be given to the shock acceleration mechanisms and the radiation signatures of the various physical processes, with the goal of solving some of the central questions in plasma/relativistic phenomena in astrophysics and in the laboratory, and opening new avenues between theoretical/massive computational studies, laboratory experiments and astrophysical observations.
Max ERC Funding
1 588 800 €
Duration
Start date: 2011-06-01, End date: 2016-07-31
Project acronym AGNES
Project ACTIVE AGEING – RESILIENCE AND EXTERNAL SUPPORT AS MODIFIERS OF THE DISABLEMENT OUTCOME
Researcher (PI) Taina Tuulikki RANTANEN
Host Institution (HI) JYVASKYLAN YLIOPISTO
Country Finland
Call Details Advanced Grant (AdG), SH3, ERC-2015-AdG
Summary The goals are 1. To develop a scale assessing the diversity of active ageing with four dimensions that are ability (what people can do), activity (what people do do), ambition (what are the valued activities that people want to do), and autonomy (how satisfied people are with the opportunity to do valued activities); 2. To examine health and physical and psychological functioning as the determinants and social and build environment, resilience and personal skills as modifiers of active ageing; 3. To develop a multicomponent sustainable intervention aiming to promote active ageing (methods: counselling, information technology, help from volunteers); 4. To test the feasibility and effectiveness on the intervention; and 5. To study cohort effects on the phenotypes on the pathway to active ageing.
“If You Can Measure It, You Can Change It.” Active ageing assessment needs conceptual progress, which I propose to do. A quantifiable scale will be developed that captures the diversity of active ageing stemming from the WHO definition of active ageing as the process of optimizing opportunities for health and participation in the society for all people in line with their needs, goals and capacities as they age. I will collect cross-sectional data (N=1000, ages 75, 80 and 85 years) and model the pathway to active ageing with state-of-the art statistical methods. By doing this I will create novel knowledge on preconditions for active ageing. The collected cohort data will be compared to a pre-existing cohort data that was collected 25 years ago to obtain knowledge about changes over time in functioning of older people. A randomized controlled trial (N=200) will be conducted to assess the effectiveness of the envisioned intervention promoting active ageing through participation. The project will regenerate ageing research by launching a novel scale, by training young scientists, by creating new concepts and theory development and by producing evidence for active ageing promotion
Summary
The goals are 1. To develop a scale assessing the diversity of active ageing with four dimensions that are ability (what people can do), activity (what people do do), ambition (what are the valued activities that people want to do), and autonomy (how satisfied people are with the opportunity to do valued activities); 2. To examine health and physical and psychological functioning as the determinants and social and build environment, resilience and personal skills as modifiers of active ageing; 3. To develop a multicomponent sustainable intervention aiming to promote active ageing (methods: counselling, information technology, help from volunteers); 4. To test the feasibility and effectiveness on the intervention; and 5. To study cohort effects on the phenotypes on the pathway to active ageing.
“If You Can Measure It, You Can Change It.” Active ageing assessment needs conceptual progress, which I propose to do. A quantifiable scale will be developed that captures the diversity of active ageing stemming from the WHO definition of active ageing as the process of optimizing opportunities for health and participation in the society for all people in line with their needs, goals and capacities as they age. I will collect cross-sectional data (N=1000, ages 75, 80 and 85 years) and model the pathway to active ageing with state-of-the art statistical methods. By doing this I will create novel knowledge on preconditions for active ageing. The collected cohort data will be compared to a pre-existing cohort data that was collected 25 years ago to obtain knowledge about changes over time in functioning of older people. A randomized controlled trial (N=200) will be conducted to assess the effectiveness of the envisioned intervention promoting active ageing through participation. The project will regenerate ageing research by launching a novel scale, by training young scientists, by creating new concepts and theory development and by producing evidence for active ageing promotion
Max ERC Funding
2 044 364 €
Duration
Start date: 2016-09-01, End date: 2021-08-31
Project acronym ALEM
Project ADDITIONAL LOSSES IN ELECTRICAL MACHINES
Researcher (PI) Matti Antero Arkkio
Host Institution (HI) AALTO KORKEAKOULUSAATIO SR
Country Finland
Call Details Advanced Grant (AdG), PE8, ERC-2013-ADG
Summary "Electrical motors consume about 40 % of the electrical energy produced in the European Union. About 90 % of this energy is converted to mechanical work. However, 0.5-2.5 % of it goes to so called additional load losses whose exact origins are unknown. Our ambitious aim is to reveal the origins of these losses, build up numerical tools for modeling them and optimize electrical motors to minimize the losses.
As the hypothesis of the research, we assume that the additional losses mainly result from the deterioration of the core materials during the manufacturing process of the machine. By calorimetric measurements, we have found that the core losses of electrical machines may be twice as large as comprehensive loss models predict. The electrical steel sheets are punched, welded together and shrink fit to the frame. This causes residual strains in the core sheets deteriorating their magnetic characteristics. The cutting burrs make galvanic contacts between the sheets and form paths for inter-lamination currents. Another potential source of additional losses are the circulating currents between the parallel strands of random-wound armature windings. The stochastic nature of these potential sources of additional losses puts more challenge on the research.
We shall develop a physical loss model that couples the mechanical strains and electromagnetic losses in electrical steel sheets and apply the new model for comprehensive loss analysis of electrical machines. The stochastic variables related to the core losses and circulating-current losses will be discretized together with the temporal and spatial discretization of the electromechanical field variables. The numerical stochastic loss model will be used to search for such machine constructions that are insensitive to the manufacturing defects. We shall validate the new numerical loss models by electromechanical and calorimetric measurements."
Summary
"Electrical motors consume about 40 % of the electrical energy produced in the European Union. About 90 % of this energy is converted to mechanical work. However, 0.5-2.5 % of it goes to so called additional load losses whose exact origins are unknown. Our ambitious aim is to reveal the origins of these losses, build up numerical tools for modeling them and optimize electrical motors to minimize the losses.
As the hypothesis of the research, we assume that the additional losses mainly result from the deterioration of the core materials during the manufacturing process of the machine. By calorimetric measurements, we have found that the core losses of electrical machines may be twice as large as comprehensive loss models predict. The electrical steel sheets are punched, welded together and shrink fit to the frame. This causes residual strains in the core sheets deteriorating their magnetic characteristics. The cutting burrs make galvanic contacts between the sheets and form paths for inter-lamination currents. Another potential source of additional losses are the circulating currents between the parallel strands of random-wound armature windings. The stochastic nature of these potential sources of additional losses puts more challenge on the research.
We shall develop a physical loss model that couples the mechanical strains and electromagnetic losses in electrical steel sheets and apply the new model for comprehensive loss analysis of electrical machines. The stochastic variables related to the core losses and circulating-current losses will be discretized together with the temporal and spatial discretization of the electromechanical field variables. The numerical stochastic loss model will be used to search for such machine constructions that are insensitive to the manufacturing defects. We shall validate the new numerical loss models by electromechanical and calorimetric measurements."
Max ERC Funding
2 489 949 €
Duration
Start date: 2014-03-01, End date: 2019-02-28
Project acronym AMETIST
Project Advanced III-V Materials and Processes Enabling Ultrahigh-efficiency ( 50%) Photovoltaics
Researcher (PI) Mircea Dorel GUINA
Host Institution (HI) TAMPEREEN KORKEAKOULUSAATIO SR
Country Finland
Call Details Advanced Grant (AdG), PE8, ERC-2015-AdG
Summary Compound semiconductor solar cells are providing the highest photovoltaic conversion efficiency, yet their performance lacks far behind the theoretical potential. This is a position we will challenge by engineering advanced III-V optoelectronics materials and heterostructures for better utilization of the solar spectrum, enabling efficiencies approaching practical limits. The work is strongly motivated by the global need for renewable energy sources. To this end, AMETIST framework is based on three vectors of excellence in: i) material science and epitaxial processes, ii) advanced solar cells exploiting nanophotonics concepts, and iii) new device fabrication technologies.
Novel heterostructures (e.g. GaInNAsSb, GaNAsBi), providing absorption in a broad spectral range from 0.7 eV to 1.4 eV, will be synthesized and monolithically integrated in tandem cells with up to 8-junctions. Nanophotonic methods for light-trapping, spectral and spatial control of solar radiation will be developed to further enhance the absorption. To ensure a high long-term impact, the project will validate the use of state-of-the-art molecular-beam-epitaxy processes for fabrication of economically viable ultra-high efficiency solar cells. The ultimate efficiency target is to reach a level of 55%. This would enable to generate renewable/ecological/sustainable energy at a levelized production cost below ~7 ¢/kWh, comparable or cheaper than fossil fuels. The work will also bring a new breath of developments for more efficient space photovoltaic systems.
AMETIST will leverage the leading position of the applicant in topical technology areas relevant for the project (i.e. epitaxy of III-N/Bi-V alloys and key achievements concerning GaInNAsSb-based tandem solar cells). Thus it renders a unique opportunity to capitalize on the group expertize and position Europe at the forefront in the global competition for demonstrating more efficient and economically viable photovoltaic technologies.
Summary
Compound semiconductor solar cells are providing the highest photovoltaic conversion efficiency, yet their performance lacks far behind the theoretical potential. This is a position we will challenge by engineering advanced III-V optoelectronics materials and heterostructures for better utilization of the solar spectrum, enabling efficiencies approaching practical limits. The work is strongly motivated by the global need for renewable energy sources. To this end, AMETIST framework is based on three vectors of excellence in: i) material science and epitaxial processes, ii) advanced solar cells exploiting nanophotonics concepts, and iii) new device fabrication technologies.
Novel heterostructures (e.g. GaInNAsSb, GaNAsBi), providing absorption in a broad spectral range from 0.7 eV to 1.4 eV, will be synthesized and monolithically integrated in tandem cells with up to 8-junctions. Nanophotonic methods for light-trapping, spectral and spatial control of solar radiation will be developed to further enhance the absorption. To ensure a high long-term impact, the project will validate the use of state-of-the-art molecular-beam-epitaxy processes for fabrication of economically viable ultra-high efficiency solar cells. The ultimate efficiency target is to reach a level of 55%. This would enable to generate renewable/ecological/sustainable energy at a levelized production cost below ~7 ¢/kWh, comparable or cheaper than fossil fuels. The work will also bring a new breath of developments for more efficient space photovoltaic systems.
AMETIST will leverage the leading position of the applicant in topical technology areas relevant for the project (i.e. epitaxy of III-N/Bi-V alloys and key achievements concerning GaInNAsSb-based tandem solar cells). Thus it renders a unique opportunity to capitalize on the group expertize and position Europe at the forefront in the global competition for demonstrating more efficient and economically viable photovoltaic technologies.
Max ERC Funding
2 492 719 €
Duration
Start date: 2017-01-01, End date: 2021-12-31
Project acronym ATLAS
Project Bioengineered autonomous cell-biomaterials devices for generating humanised micro-tissues for regenerative medicine
Researcher (PI) Joao Felipe Colardelle da Luz Mano
Host Institution (HI) UNIVERSIDADE DE AVEIRO
Country Portugal
Call Details Advanced Grant (AdG), PE8, ERC-2014-ADG
Summary New generations of devices for tissue engineering (TE) should rationalize better the physical and biochemical cues operating in tandem during native regeneration, in particular at the scale/organizational-level of the stem cell niche. The understanding and the deconstruction of these factors (e.g. multiple cell types exchanging both paracrine and direct signals, structural and chemical arrangement of the extra-cellular matrix, mechanical signals…) should be then incorporated into the design of truly biomimetic biomaterials. ATLAS proposes rather unique toolboxes combining smart biomaterials and cells for the ground-breaking advances of engineering fully time-self-regulated complex 2D and 3D devices, able to adjust the cascade of processes leading to faster high-quality new tissue formation with minimum pre-processing of cells. Versatile biomaterials based on marine-origin macromolecules will be used, namely in the supramolecular assembly of instructive multilayers as nanostratified building-blocks for engineer such structures. The backbone of these biopolymers will be equipped with a variety of (bio)chemical elements permitting: post-processing chemistry and micro-patterning, specific/non-specific cell attachment, and cell-controlled degradation. Aiming at being applied in bone TE, ATLAS will integrate cells from different units of tissue physiology, namely bone and hematopoietic basic elements and consider the interactions between the immune and skeletal systems. These ingredients will permit to architect innovative films with high-level dialogue control with cells, but in particular sophisticated quasi-closed 3D capsules able to compartmentalise such components in a “globe-like” organization, providing local and long-range order for in vitro microtissue development and function. Such hybrid devices could be used in more generalised front-edge applications, including as disease models for drug discovery or test new therapies in vitro.
Summary
New generations of devices for tissue engineering (TE) should rationalize better the physical and biochemical cues operating in tandem during native regeneration, in particular at the scale/organizational-level of the stem cell niche. The understanding and the deconstruction of these factors (e.g. multiple cell types exchanging both paracrine and direct signals, structural and chemical arrangement of the extra-cellular matrix, mechanical signals…) should be then incorporated into the design of truly biomimetic biomaterials. ATLAS proposes rather unique toolboxes combining smart biomaterials and cells for the ground-breaking advances of engineering fully time-self-regulated complex 2D and 3D devices, able to adjust the cascade of processes leading to faster high-quality new tissue formation with minimum pre-processing of cells. Versatile biomaterials based on marine-origin macromolecules will be used, namely in the supramolecular assembly of instructive multilayers as nanostratified building-blocks for engineer such structures. The backbone of these biopolymers will be equipped with a variety of (bio)chemical elements permitting: post-processing chemistry and micro-patterning, specific/non-specific cell attachment, and cell-controlled degradation. Aiming at being applied in bone TE, ATLAS will integrate cells from different units of tissue physiology, namely bone and hematopoietic basic elements and consider the interactions between the immune and skeletal systems. These ingredients will permit to architect innovative films with high-level dialogue control with cells, but in particular sophisticated quasi-closed 3D capsules able to compartmentalise such components in a “globe-like” organization, providing local and long-range order for in vitro microtissue development and function. Such hybrid devices could be used in more generalised front-edge applications, including as disease models for drug discovery or test new therapies in vitro.
Max ERC Funding
2 498 988 €
Duration
Start date: 2015-12-01, End date: 2021-04-30
Project acronym ATOP
Project Atomically-engineered nonlinear photonics with two-dimensional layered material superlattices
Researcher (PI) zhipei SUN
Host Institution (HI) AALTO KORKEAKOULUSAATIO SR
Country Finland
Call Details Advanced Grant (AdG), PE8, ERC-2018-ADG
Summary The project aims at introducing a paradigm shift in the development of nonlinear photonics with atomically-engineered two-dimensional (2D) van der Waals superlattices (2DSs). Monolayer 2D materials have large optical nonlinear susceptibilities, a few orders of magnitude larger than typical traditional bulk materials. However, nonlinear frequency conversion efficiency of monolayer 2D materials is typically weak mainly due to their extremely short interaction length (~atomic scale) and relatively large absorption coefficient (e.g.,>5×10^7 m^-1 in the visible range for graphene and MoS2 after thickness normalization). In this context, I will construct atomically-engineered heterojunctions based 2DSs to significantly enhance the nonlinear optical responses of 2D materials by coherently increasing light-matter interaction length and efficiently creating fundamentally new physical properties (e.g., reducing optical loss and increasing nonlinear susceptibilities).
The concrete project objectives are to theoretically calculate, experimentally fabricate and study optical nonlinearities of 2DSs for next-generation nonlinear photonics at the nanoscale. More specifically, I will use 2DSs as new building blocks to develop three of the most disruptive nonlinear photonic devices: (1) on-chip optical parametric generation sources; (2) broadband Terahertz sources; (3) high-purity photon-pair emitters. These devices will lead to a breakthrough technology to enable highly-integrated, high-efficient and wideband lab-on-chip photonic systems with unprecedented performance in system size, power consumption, flexibility and reliability, ideally fitting numerous growing and emerging applications, e.g. metrology, portable sensing/imaging, and quantum-communications. Based on my proven track record and my pioneering work on 2D materials based photonics and optoelectronics, I believe I will accomplish this ambitious frontier research program with a strong interdisciplinary nature.
Summary
The project aims at introducing a paradigm shift in the development of nonlinear photonics with atomically-engineered two-dimensional (2D) van der Waals superlattices (2DSs). Monolayer 2D materials have large optical nonlinear susceptibilities, a few orders of magnitude larger than typical traditional bulk materials. However, nonlinear frequency conversion efficiency of monolayer 2D materials is typically weak mainly due to their extremely short interaction length (~atomic scale) and relatively large absorption coefficient (e.g.,>5×10^7 m^-1 in the visible range for graphene and MoS2 after thickness normalization). In this context, I will construct atomically-engineered heterojunctions based 2DSs to significantly enhance the nonlinear optical responses of 2D materials by coherently increasing light-matter interaction length and efficiently creating fundamentally new physical properties (e.g., reducing optical loss and increasing nonlinear susceptibilities).
The concrete project objectives are to theoretically calculate, experimentally fabricate and study optical nonlinearities of 2DSs for next-generation nonlinear photonics at the nanoscale. More specifically, I will use 2DSs as new building blocks to develop three of the most disruptive nonlinear photonic devices: (1) on-chip optical parametric generation sources; (2) broadband Terahertz sources; (3) high-purity photon-pair emitters. These devices will lead to a breakthrough technology to enable highly-integrated, high-efficient and wideband lab-on-chip photonic systems with unprecedented performance in system size, power consumption, flexibility and reliability, ideally fitting numerous growing and emerging applications, e.g. metrology, portable sensing/imaging, and quantum-communications. Based on my proven track record and my pioneering work on 2D materials based photonics and optoelectronics, I believe I will accomplish this ambitious frontier research program with a strong interdisciplinary nature.
Max ERC Funding
2 442 448 €
Duration
Start date: 2019-09-01, End date: 2024-08-31
Project acronym BI-DSC
Project Building Integrated Dye Sensitized Solar Cells
Researcher (PI) Adelio Miguel Magalhaes Mendes
Host Institution (HI) UNIVERSIDADE DO PORTO
Country Portugal
Call Details Advanced Grant (AdG), PE8, ERC-2012-ADG_20120216
Summary In the last decade, solar and photovoltaic (PV) technologies have emerged as a potentially major technology for power generation in the world. So far the PV field has been dominated by silicon devices, even though this technology is still expensive.Dye-sensitized solar cells (DSC) are an important type of thin-film photovoltaics due to their potential for low-cost fabrication and versatile applications, and because their aesthetic appearance, semi-transparency and different color possibilities.This advantageous characteristic makes DSC the first choice for building integrated photovoltaics.Despite their great potential, DSCs for building applications are still not available at commercial level. However, to bring DSCs to a marketable product several developments are still needed and the present project targets to give relevant answers to three key limitations: encapsulation, glass substrate enhanced electrical conductivity and more efficient and low-cost raw-materials. Recently, the proponent successfully addressed the hermetic devices sealing by developing a laser-assisted glass sealing procedure.Thus, BI-DSC proposal envisages the development of DSC modules 30x30cm2, containing four individual cells, and their incorporation in a 1m2 double glass sheet arrangement for BIPV with an energy efficiency of at least 9% and a lifetime of 20 years. Additionally, aiming at enhanced efficiency of the final device and decreased total costs of DSCs manufacturing, new materials will be also pursued. The following inner-components were identified as critical: carbon-based counter-electrode; carbon quantum-dots and hierarchically TiO2 photoelectrode. It is then clear that this project is divided into two research though parallel directions: a fundamental research line, contributing to the development of the new generation DSC technology; while a more applied research line targets the development of a DSC functional module that can be used to pave the way for its industrialization.
Summary
In the last decade, solar and photovoltaic (PV) technologies have emerged as a potentially major technology for power generation in the world. So far the PV field has been dominated by silicon devices, even though this technology is still expensive.Dye-sensitized solar cells (DSC) are an important type of thin-film photovoltaics due to their potential for low-cost fabrication and versatile applications, and because their aesthetic appearance, semi-transparency and different color possibilities.This advantageous characteristic makes DSC the first choice for building integrated photovoltaics.Despite their great potential, DSCs for building applications are still not available at commercial level. However, to bring DSCs to a marketable product several developments are still needed and the present project targets to give relevant answers to three key limitations: encapsulation, glass substrate enhanced electrical conductivity and more efficient and low-cost raw-materials. Recently, the proponent successfully addressed the hermetic devices sealing by developing a laser-assisted glass sealing procedure.Thus, BI-DSC proposal envisages the development of DSC modules 30x30cm2, containing four individual cells, and their incorporation in a 1m2 double glass sheet arrangement for BIPV with an energy efficiency of at least 9% and a lifetime of 20 years. Additionally, aiming at enhanced efficiency of the final device and decreased total costs of DSCs manufacturing, new materials will be also pursued. The following inner-components were identified as critical: carbon-based counter-electrode; carbon quantum-dots and hierarchically TiO2 photoelectrode. It is then clear that this project is divided into two research though parallel directions: a fundamental research line, contributing to the development of the new generation DSC technology; while a more applied research line targets the development of a DSC functional module that can be used to pave the way for its industrialization.
Max ERC Funding
1 989 300 €
Duration
Start date: 2013-03-01, End date: 2018-08-31
Project acronym Bi3BoostFlowBat
Project Bioinspired, biphasic and bipolar flow batteries with boosters for sustainable large-scale energy storage
Researcher (PI) Pekka PELJO
Host Institution (HI) TURUN YLIOPISTO
Country Finland
Call Details Starting Grant (StG), PE8, ERC-2020-STG
Summary To satisfy our growing energy demand while reducing reliance on fossil fuels, a switch to renewable energy sources is vital. The intermittent nature of the latter means innovations in energy storage technology is a key grand challenge. Cost and sustainability issues currently limit the widespread use of electrochemical energy storage technologies, such as lithium ion and redox flow batteries. As the scale for energy storage is simply enormous, the only option is to look for abundant materials. However, compounds that fulfil the extensive requirements entailed at low cost has yet to be reported. While it is possible that the holy grail of energy storage will be found, for example by advanced computational tools and machine learning to design “perfect” abundant molecules, a more flexible, innovative solution to sustainable and cost-effective large-scale energy storage is required. Bi3BoostFlowBat will develop game changing strategies to widen the choice of compounds utilizable for batteries to simultaneously satisfy the requirements for low cost, optimal redox potentials, high solubility and stability in all conditions. The aim of this project is to develop cost-efficient batteries by using solid boosters and by eliminating cross over. Two approaches will be pursued for cross-over elimination 1) bio-inspired polymer batteries, where cross-over of solubilized polymers is prevented by size-exclusion membranes and 2) biphasic emulsion flow batteries, where redox species are transferred to oil phase droplets upon charge. Third research direction focuses on systems to maintain a pH gradient, to allow operation of differential pH systems to improve the cell voltages. Limits of different approaches will be explored by taking an electrochemical engineering approach to model the performance of different systems and by validating the models experimentally. This work will chart the route towards the future third generation battery technologies for the large-scale energy storage.
Summary
To satisfy our growing energy demand while reducing reliance on fossil fuels, a switch to renewable energy sources is vital. The intermittent nature of the latter means innovations in energy storage technology is a key grand challenge. Cost and sustainability issues currently limit the widespread use of electrochemical energy storage technologies, such as lithium ion and redox flow batteries. As the scale for energy storage is simply enormous, the only option is to look for abundant materials. However, compounds that fulfil the extensive requirements entailed at low cost has yet to be reported. While it is possible that the holy grail of energy storage will be found, for example by advanced computational tools and machine learning to design “perfect” abundant molecules, a more flexible, innovative solution to sustainable and cost-effective large-scale energy storage is required. Bi3BoostFlowBat will develop game changing strategies to widen the choice of compounds utilizable for batteries to simultaneously satisfy the requirements for low cost, optimal redox potentials, high solubility and stability in all conditions. The aim of this project is to develop cost-efficient batteries by using solid boosters and by eliminating cross over. Two approaches will be pursued for cross-over elimination 1) bio-inspired polymer batteries, where cross-over of solubilized polymers is prevented by size-exclusion membranes and 2) biphasic emulsion flow batteries, where redox species are transferred to oil phase droplets upon charge. Third research direction focuses on systems to maintain a pH gradient, to allow operation of differential pH systems to improve the cell voltages. Limits of different approaches will be explored by taking an electrochemical engineering approach to model the performance of different systems and by validating the models experimentally. This work will chart the route towards the future third generation battery technologies for the large-scale energy storage.
Max ERC Funding
1 499 880 €
Duration
Start date: 2021-01-01, End date: 2025-12-31
Project acronym BioELCell
Project Bioproducts Engineered from Lignocelluloses: from plants and upcycling to next generation materials
Researcher (PI) Orlando Rojas Gaona
Host Institution (HI) AALTO KORKEAKOULUSAATIO SR
Country Finland
Call Details Advanced Grant (AdG), PE8, ERC-2017-ADG
Summary BioELCell will deliver ground-breaking approaches to create next material generation based on renewable resources, mainly cellulose and lignin micro- and nano-particles (MNC, MNL). Our action will disassemble and re-engineer these plant-based polymers into functional materials that will respond to the demands of the bioeconomy of the future, critically important to Europe and the world. My ambitious, high gain research plan is underpinned in the use of multiphase systems with ultra-low interfacial tension to facilitate nanocellulose liberation and atomization of lignin solution streams into spherical particles.
BioELCell will design novel routes to control MNC and MNL reassembly in new 1-D, 2-D and 3-D structures. The systematic methodologies that I propose will address the main challenges for lignocellulose processing and deployment, considering the important effects of interactions with water. This BioELCell action presents a transformative approach by integrating complementary disciplines that will lead to a far-reaching understanding of lignocellulosic biopolymers and solve key challenges in their use, paving the way to functional product development. Results of this project permeates directly or indirectly in the grand challenges for engineering, namely, water use, carbon sequestration, nitrogen cycle, food and advanced materials. Indeed, after addressing the key fundamental elements of the research lines, BioELCell vindicates such effects based on rational use of plant-based materials as a sustainable resource, making possible the generation of new functions and advanced materials.
BioELCell goes far beyond what is known today about cellulose and lignin micro and nano-particles, some of the most promising materials of our century, which are emerging as key elements for the success of a sustainable society.
Summary
BioELCell will deliver ground-breaking approaches to create next material generation based on renewable resources, mainly cellulose and lignin micro- and nano-particles (MNC, MNL). Our action will disassemble and re-engineer these plant-based polymers into functional materials that will respond to the demands of the bioeconomy of the future, critically important to Europe and the world. My ambitious, high gain research plan is underpinned in the use of multiphase systems with ultra-low interfacial tension to facilitate nanocellulose liberation and atomization of lignin solution streams into spherical particles.
BioELCell will design novel routes to control MNC and MNL reassembly in new 1-D, 2-D and 3-D structures. The systematic methodologies that I propose will address the main challenges for lignocellulose processing and deployment, considering the important effects of interactions with water. This BioELCell action presents a transformative approach by integrating complementary disciplines that will lead to a far-reaching understanding of lignocellulosic biopolymers and solve key challenges in their use, paving the way to functional product development. Results of this project permeates directly or indirectly in the grand challenges for engineering, namely, water use, carbon sequestration, nitrogen cycle, food and advanced materials. Indeed, after addressing the key fundamental elements of the research lines, BioELCell vindicates such effects based on rational use of plant-based materials as a sustainable resource, making possible the generation of new functions and advanced materials.
BioELCell goes far beyond what is known today about cellulose and lignin micro and nano-particles, some of the most promising materials of our century, which are emerging as key elements for the success of a sustainable society.
Max ERC Funding
2 486 182 €
Duration
Start date: 2018-08-01, End date: 2023-07-31
Project acronym BIZEB
Project Bio-Imaging of Zoonotic and Emerging Bunyaviruses
Researcher (PI) Juha Huiskonen
Host Institution (HI) HELSINGIN YLIOPISTO
Country Finland
Call Details Consolidator Grant (CoG), LS1, ERC-2014-CoG
Summary We aim to understand host cell entry of enveloped viruses at molecular level. A crucial step in this process is when the viral membrane fuses with the cell membrane. Similarly to cell–cell fusion, this step is mediated by fusion proteins (classes I–III). Several medically important viruses, notably dengue and many bunyaviruses, harbour a class II fusion protein. Class II fusion protein structures have been solved in pre- and post-fusion conformation and in some cases different factors promoting fusion have been determined. However, questions about the most important steps of this key process remain unanswered. I will focus on the entry mechanism of bunyaviruses by using cutting-edge, high spatial and temporal resolution bio-imaging techniques. These viruses have been chosen as a model system to maximise the significance of the project: they form an emerging viral threat to humans and animals, no approved vaccines or antivirals exist for human use and they are less studied than other class II fusion protein systems. Cryo-electron microscopy and tomography will be used to solve high-resolution structures (up to ~3 Å) of viruses, in addition to virus–receptor and virus–membrane complexes. Advanced fluorescence microscopy techniques will be used to probe the dynamics of virus entry and fusion in vivo and in vitro. Deciphering key steps in virus entry is expected to contribute to rational vaccine and drug design. During this project I aim to establish a world-class laboratory in structural and cellular biology of emerging viruses. The project greatly benefits from our unique biosafety level 3 laboratory offering advanced bio-imaging techniques. Furthermore it will also pave way for similar projects on other infectious viruses. Finally the novel computational image processing methods developed in this project will be broadly applicable for the analysis of flexible biological structures, which often pose the most challenging yet interesting questions in structural biology.
Summary
We aim to understand host cell entry of enveloped viruses at molecular level. A crucial step in this process is when the viral membrane fuses with the cell membrane. Similarly to cell–cell fusion, this step is mediated by fusion proteins (classes I–III). Several medically important viruses, notably dengue and many bunyaviruses, harbour a class II fusion protein. Class II fusion protein structures have been solved in pre- and post-fusion conformation and in some cases different factors promoting fusion have been determined. However, questions about the most important steps of this key process remain unanswered. I will focus on the entry mechanism of bunyaviruses by using cutting-edge, high spatial and temporal resolution bio-imaging techniques. These viruses have been chosen as a model system to maximise the significance of the project: they form an emerging viral threat to humans and animals, no approved vaccines or antivirals exist for human use and they are less studied than other class II fusion protein systems. Cryo-electron microscopy and tomography will be used to solve high-resolution structures (up to ~3 Å) of viruses, in addition to virus–receptor and virus–membrane complexes. Advanced fluorescence microscopy techniques will be used to probe the dynamics of virus entry and fusion in vivo and in vitro. Deciphering key steps in virus entry is expected to contribute to rational vaccine and drug design. During this project I aim to establish a world-class laboratory in structural and cellular biology of emerging viruses. The project greatly benefits from our unique biosafety level 3 laboratory offering advanced bio-imaging techniques. Furthermore it will also pave way for similar projects on other infectious viruses. Finally the novel computational image processing methods developed in this project will be broadly applicable for the analysis of flexible biological structures, which often pose the most challenging yet interesting questions in structural biology.
Max ERC Funding
1 998 375 €
Duration
Start date: 2015-04-01, End date: 2020-03-31
