Project acronym ATMEN
Project Atomic precision materials engineering
Researcher (PI) Toma SUSI
Host Institution (HI) UNIVERSITAT WIEN
Country Austria
Call Details Starting Grant (StG), PE5, ERC-2017-STG
Summary Despite more than fifty years of scientific progress since Richard Feynman's 1959 vision for nanotechnology, there is only one way to manipulate individual atoms in materials: scanning tunneling microscopy. Since the late 1980s, its atomically sharp tip has been used to move atoms over clean metal surfaces held at cryogenic temperatures. Scanning transmission electron microscopy, on the other hand, has been able to resolve atoms only more recently by focusing the electron beam with sub-atomic precision. This is especially useful in the two-dimensional form of hexagonally bonded carbon called graphene, which has superb electronic and mechanical properties. Several ways to further engineer those have been proposed, including by doping the structure with substitutional heteroatoms such as boron, nitrogen, phosphorus and silicon. My recent discovery that the scattering of the energetic imaging electrons can cause a silicon impurity to move through the graphene lattice has revealed a potential for atomically precise manipulation using the Ångström-sized electron probe. To develop this into a practical technique, improvements in the description of beam-induced displacements, advances in heteroatom implantation, and a concerted effort towards the automation of manipulations are required. My project tackles these in a multidisciplinary effort combining innovative computational techniques with pioneering experiments in an instrument where a low-energy ion implantation chamber is directly connected to an advanced electron microscope. To demonstrate the power of the method, I will prototype an atomic memory with an unprecedented memory density, and create heteroatom quantum corrals optimized for their plasmonic properties. The capability for atom-scale engineering of covalent materials opens a new vista for nanotechnology, pushing back the boundaries of the possible and allowing a plethora of materials science questions to be studied at the ultimate level of control.
Summary
Despite more than fifty years of scientific progress since Richard Feynman's 1959 vision for nanotechnology, there is only one way to manipulate individual atoms in materials: scanning tunneling microscopy. Since the late 1980s, its atomically sharp tip has been used to move atoms over clean metal surfaces held at cryogenic temperatures. Scanning transmission electron microscopy, on the other hand, has been able to resolve atoms only more recently by focusing the electron beam with sub-atomic precision. This is especially useful in the two-dimensional form of hexagonally bonded carbon called graphene, which has superb electronic and mechanical properties. Several ways to further engineer those have been proposed, including by doping the structure with substitutional heteroatoms such as boron, nitrogen, phosphorus and silicon. My recent discovery that the scattering of the energetic imaging electrons can cause a silicon impurity to move through the graphene lattice has revealed a potential for atomically precise manipulation using the Ångström-sized electron probe. To develop this into a practical technique, improvements in the description of beam-induced displacements, advances in heteroatom implantation, and a concerted effort towards the automation of manipulations are required. My project tackles these in a multidisciplinary effort combining innovative computational techniques with pioneering experiments in an instrument where a low-energy ion implantation chamber is directly connected to an advanced electron microscope. To demonstrate the power of the method, I will prototype an atomic memory with an unprecedented memory density, and create heteroatom quantum corrals optimized for their plasmonic properties. The capability for atom-scale engineering of covalent materials opens a new vista for nanotechnology, pushing back the boundaries of the possible and allowing a plethora of materials science questions to be studied at the ultimate level of control.
Max ERC Funding
1 497 202 €
Duration
Start date: 2017-10-01, End date: 2022-09-30
Project acronym AYURYOG
Project Medicine, Immortality, Moksha: Entangled Histories of Yoga, Ayurveda and Alchemy in South Asia
Researcher (PI) Dagmar Wujastyk
Host Institution (HI) UNIVERSITAT WIEN
Country Austria
Call Details Starting Grant (StG), SH6, ERC-2014-STG
Summary The project will examine the histories of yoga, ayurveda and rasashastra (Indian alchemy and iatrochemistry) from the tenth century to the present, focussing on the disciplines' health, rejuvenation and longevity practices. The goals of the project are to reveal the entanglements of these historical traditions, and to trace the trajectories of their evolution as components of today's global healthcare and personal development industries.
Our hypothesis is that practices aimed at achieving health, rejuvenation and longevity constitute a key area of exchange between the three disciplines, preparing the grounds for a series of important pharmaceutical and technological innovations and also profoundly influencing the discourses of today's medicalized forms of globalized yoga as well as of contemporary institutionalized forms of ayurveda and rasashastra.
Drawing upon the primary historical sources of each respective tradition as well as on fieldwork data, the research team will explore the shared terminology, praxis and theory of these three disciplines. We will examine why, when and how health, rejuvenation and longevity practices were employed; how each discipline’s discourse and practical applications relates to those of the others; and how past encounters and cross-fertilizations impact on contemporary health-related practices in yogic, ayurvedic and alchemists’ milieus.
The five-year project will be based at the Department of South Asian, Tibetan and Buddhist Studies at Vienna University and carried out by an international team of 3 post-doctoral researchers. The research will be grounded in the fields of South Asian studies and social history. An international workshop and an international conference will be organized to present and discuss the research results, which will also be published in peer-reviewed journals, an edited volume, and in individual monographs. A project website will provide open access to all research results.
Summary
The project will examine the histories of yoga, ayurveda and rasashastra (Indian alchemy and iatrochemistry) from the tenth century to the present, focussing on the disciplines' health, rejuvenation and longevity practices. The goals of the project are to reveal the entanglements of these historical traditions, and to trace the trajectories of their evolution as components of today's global healthcare and personal development industries.
Our hypothesis is that practices aimed at achieving health, rejuvenation and longevity constitute a key area of exchange between the three disciplines, preparing the grounds for a series of important pharmaceutical and technological innovations and also profoundly influencing the discourses of today's medicalized forms of globalized yoga as well as of contemporary institutionalized forms of ayurveda and rasashastra.
Drawing upon the primary historical sources of each respective tradition as well as on fieldwork data, the research team will explore the shared terminology, praxis and theory of these three disciplines. We will examine why, when and how health, rejuvenation and longevity practices were employed; how each discipline’s discourse and practical applications relates to those of the others; and how past encounters and cross-fertilizations impact on contemporary health-related practices in yogic, ayurvedic and alchemists’ milieus.
The five-year project will be based at the Department of South Asian, Tibetan and Buddhist Studies at Vienna University and carried out by an international team of 3 post-doctoral researchers. The research will be grounded in the fields of South Asian studies and social history. An international workshop and an international conference will be organized to present and discuss the research results, which will also be published in peer-reviewed journals, an edited volume, and in individual monographs. A project website will provide open access to all research results.
Max ERC Funding
1 416 146 €
Duration
Start date: 2015-06-01, End date: 2020-05-31
Project acronym Bi3BoostFlowBat
Project Bioinspired, biphasic and bipolar flow batteries with boosters for sustainable large-scale energy storage
Researcher (PI) Pekka PELJO
Host Institution (HI) TURUN YLIOPISTO
Country Finland
Call Details Starting Grant (StG), PE8, ERC-2020-STG
Summary To satisfy our growing energy demand while reducing reliance on fossil fuels, a switch to renewable energy sources is vital. The intermittent nature of the latter means innovations in energy storage technology is a key grand challenge. Cost and sustainability issues currently limit the widespread use of electrochemical energy storage technologies, such as lithium ion and redox flow batteries. As the scale for energy storage is simply enormous, the only option is to look for abundant materials. However, compounds that fulfil the extensive requirements entailed at low cost has yet to be reported. While it is possible that the holy grail of energy storage will be found, for example by advanced computational tools and machine learning to design “perfect” abundant molecules, a more flexible, innovative solution to sustainable and cost-effective large-scale energy storage is required. Bi3BoostFlowBat will develop game changing strategies to widen the choice of compounds utilizable for batteries to simultaneously satisfy the requirements for low cost, optimal redox potentials, high solubility and stability in all conditions. The aim of this project is to develop cost-efficient batteries by using solid boosters and by eliminating cross over. Two approaches will be pursued for cross-over elimination 1) bio-inspired polymer batteries, where cross-over of solubilized polymers is prevented by size-exclusion membranes and 2) biphasic emulsion flow batteries, where redox species are transferred to oil phase droplets upon charge. Third research direction focuses on systems to maintain a pH gradient, to allow operation of differential pH systems to improve the cell voltages. Limits of different approaches will be explored by taking an electrochemical engineering approach to model the performance of different systems and by validating the models experimentally. This work will chart the route towards the future third generation battery technologies for the large-scale energy storage.
Summary
To satisfy our growing energy demand while reducing reliance on fossil fuels, a switch to renewable energy sources is vital. The intermittent nature of the latter means innovations in energy storage technology is a key grand challenge. Cost and sustainability issues currently limit the widespread use of electrochemical energy storage technologies, such as lithium ion and redox flow batteries. As the scale for energy storage is simply enormous, the only option is to look for abundant materials. However, compounds that fulfil the extensive requirements entailed at low cost has yet to be reported. While it is possible that the holy grail of energy storage will be found, for example by advanced computational tools and machine learning to design “perfect” abundant molecules, a more flexible, innovative solution to sustainable and cost-effective large-scale energy storage is required. Bi3BoostFlowBat will develop game changing strategies to widen the choice of compounds utilizable for batteries to simultaneously satisfy the requirements for low cost, optimal redox potentials, high solubility and stability in all conditions. The aim of this project is to develop cost-efficient batteries by using solid boosters and by eliminating cross over. Two approaches will be pursued for cross-over elimination 1) bio-inspired polymer batteries, where cross-over of solubilized polymers is prevented by size-exclusion membranes and 2) biphasic emulsion flow batteries, where redox species are transferred to oil phase droplets upon charge. Third research direction focuses on systems to maintain a pH gradient, to allow operation of differential pH systems to improve the cell voltages. Limits of different approaches will be explored by taking an electrochemical engineering approach to model the performance of different systems and by validating the models experimentally. This work will chart the route towards the future third generation battery technologies for the large-scale energy storage.
Max ERC Funding
1 499 880 €
Duration
Start date: 2021-01-01, End date: 2025-12-31
Project acronym BOMPAC
Project Books of the Medieval Parish Church
Researcher (PI) Jaakko Tahkokallio
Host Institution (HI) HELSINGIN YLIOPISTO
Country Finland
Call Details Starting Grant (StG), SH6, ERC-2020-STG
Summary Book production became a market-orientated craft long before the invention of printing. In the late-medieval manuscript economy, the parish churches formed one of the biggest entities on the demand side. However, at present we know next to nothing about how they were provisioned with books. BOMPAC is a response to this gap in scholarly understanding. It offers the first substantial study of the place of the parish church in the culture and economy of the manuscript book, c. 1150–c.1500.
BOMPACs contribution to the topic will be twofold. It will, firstly, provide an extensive case study concering one medieval kingdom – Sweden – comprising more or less two modern countries (Sweden, Finland). Secondly, preliminary research indicates that many of the books used in the parishes of medieval Sweden were imported from abroad. Thus, the project will directly break new ground in the study of the international book economy of the later middle ages.
Parish church book provision remains poorly known because such books very rarely survive as complete physical items. BOMPAC will go around this limitation by innovative use of a hitherto understudied corpus of manuscript fragments. In Sweden, the parchment books of the parishes were recycled as covers for tax accounts in the sixteenth and seventeenth centuries. This operation was systematic and resulted in a massive collection of c. 50 000 leaves from c. 12 500 books, probably the biggest collection of material from medieval parish church books anywhere in the world.
Only recent cataloguing and digitizing efforts have made this material accessible for research. In BOMPAC, it will be studied with both statistical and palaeographical methods. A database-driven approach is used to produce a reliable big picture of how the books were distributed in the medieval period. Palaeographical and codicological case studies will show us the modes and routes by which parish churches acquired their books.
Summary
Book production became a market-orientated craft long before the invention of printing. In the late-medieval manuscript economy, the parish churches formed one of the biggest entities on the demand side. However, at present we know next to nothing about how they were provisioned with books. BOMPAC is a response to this gap in scholarly understanding. It offers the first substantial study of the place of the parish church in the culture and economy of the manuscript book, c. 1150–c.1500.
BOMPACs contribution to the topic will be twofold. It will, firstly, provide an extensive case study concering one medieval kingdom – Sweden – comprising more or less two modern countries (Sweden, Finland). Secondly, preliminary research indicates that many of the books used in the parishes of medieval Sweden were imported from abroad. Thus, the project will directly break new ground in the study of the international book economy of the later middle ages.
Parish church book provision remains poorly known because such books very rarely survive as complete physical items. BOMPAC will go around this limitation by innovative use of a hitherto understudied corpus of manuscript fragments. In Sweden, the parchment books of the parishes were recycled as covers for tax accounts in the sixteenth and seventeenth centuries. This operation was systematic and resulted in a massive collection of c. 50 000 leaves from c. 12 500 books, probably the biggest collection of material from medieval parish church books anywhere in the world.
Only recent cataloguing and digitizing efforts have made this material accessible for research. In BOMPAC, it will be studied with both statistical and palaeographical methods. A database-driven approach is used to produce a reliable big picture of how the books were distributed in the medieval period. Palaeographical and codicological case studies will show us the modes and routes by which parish churches acquired their books.
Max ERC Funding
1 499 808 €
Duration
Start date: 2021-01-01, End date: 2025-12-31
Project acronym CapBed
Project Engineered Capillary Beds for Successful Prevascularization of Tissue Engineering Constructs
Researcher (PI) Rogerio Pedro Lemos de Sousa Pirraco
Host Institution (HI) UNIVERSIDADE DO MINHO
Country Portugal
Call Details Starting Grant (StG), PE8, ERC-2018-STG
Summary The demand for donated organs vastly outnumbers the supply, leading each year to the death of thousands of people and the suffering of millions more. Engineered tissues and organs following Tissue Engineering approaches are a possible solution to this problem. However, a prevascularization solution to irrigate complex engineered tissues and assure their survival after transplantation is currently elusive. In the human body, complex organs and tissues irrigation is achieved by a network of blood vessels termed capillary bed which suggests such a structure is needed in engineered tissues. Previous approaches to engineer capillary beds reached different levels of success but none yielded a fully functional one due to the inability in simultaneously addressing key elements such as correct angiogenic cell populations, a suitable matrix and dynamic conditions that mimic blood flow.
CapBed aims at proposing a new technology to fabricate in vitro capillary beds that include a vascular axis that can be anastomosed with a patient circulation. Such capillary beds could be used as prime tools to prevascularize in vitro engineered tissues and provide fast perfusion of those after transplantation to a patient. Cutting edge techniques will be for the first time integrated in a disruptive approach to address the requirements listed above. Angiogenic cell sheets of human Adipose-derived Stromal Vascular fraction cells will provide the cell populations that integrate the capillaries and manage its intricate formation, as well as the collagen required to build the matrix that will hold the capillary beds. Innovative fabrication technologies such as 3D printing and laser photoablation will be used for the fabrication of the micropatterned matrix that will allow fluid flow through microfluidics. The resulting functional capillary beds can be used with virtually every tissue engineering strategy rendering the proposed strategy with massive economical, scientific and medical potential
Summary
The demand for donated organs vastly outnumbers the supply, leading each year to the death of thousands of people and the suffering of millions more. Engineered tissues and organs following Tissue Engineering approaches are a possible solution to this problem. However, a prevascularization solution to irrigate complex engineered tissues and assure their survival after transplantation is currently elusive. In the human body, complex organs and tissues irrigation is achieved by a network of blood vessels termed capillary bed which suggests such a structure is needed in engineered tissues. Previous approaches to engineer capillary beds reached different levels of success but none yielded a fully functional one due to the inability in simultaneously addressing key elements such as correct angiogenic cell populations, a suitable matrix and dynamic conditions that mimic blood flow.
CapBed aims at proposing a new technology to fabricate in vitro capillary beds that include a vascular axis that can be anastomosed with a patient circulation. Such capillary beds could be used as prime tools to prevascularize in vitro engineered tissues and provide fast perfusion of those after transplantation to a patient. Cutting edge techniques will be for the first time integrated in a disruptive approach to address the requirements listed above. Angiogenic cell sheets of human Adipose-derived Stromal Vascular fraction cells will provide the cell populations that integrate the capillaries and manage its intricate formation, as well as the collagen required to build the matrix that will hold the capillary beds. Innovative fabrication technologies such as 3D printing and laser photoablation will be used for the fabrication of the micropatterned matrix that will allow fluid flow through microfluidics. The resulting functional capillary beds can be used with virtually every tissue engineering strategy rendering the proposed strategy with massive economical, scientific and medical potential
Max ERC Funding
1 499 940 €
Duration
Start date: 2018-11-01, End date: 2024-04-30
Project acronym CatASus
Project Cleave and couple: Fully sustainable catalytic conversion of renewable resources to amines
Researcher (PI) Katalin Barta Weissert
Host Institution (HI) UNIVERSITAET GRAZ
Country Austria
Call Details Starting Grant (StG), PE5, ERC-2015-STG
Summary Amines are crucially important classes of chemicals, widely present in pharmaceuticals, agrochemicals and surfactants. Yet, surprisingly, a systematic approach to obtaining this essential class of compounds from renewables has not been realized to date.
The aim of this proposal is to enable chemical pathways for the production of amines through alcohols from renewable resources, preferably lignocellulose waste. Two key scientific challenges will be addressed: The development of efficient cleavage reactions of complex renewable resources by novel heterogeneous catalysts; and finding new homogeneous catalyst based on earth-abundant metals for the atom-economic coupling of the derived alcohol building blocks directly with ammonia as well as possible further functionalization reactions. The program is divided into 3 interrelated but not mutually dependent work packages, each research addressing a key challenge in their respective fields, these are:
WP1: Lignin conversion to aromatics; WP2: Cellulose-derived platform chemicals to aromatic and aliphatic diols and solvents. WP3: New iron-based homogeneous catalysts for the direct, atom-economic C-O to C-N transformations.
The approach taken will embrace the inherent complexity present in the renewable feedstock. A unique balance between cleavage and coupling pathways will allow to access chemical diversity in products that is necessary to achieve economic competitiveness with current fossil fuel-based pathways and will permit rapid conversion to higher value products such as functionalized amines that can enter the chemical supply chain at a much later stage than bulk chemicals derived from petroleum. The proposed high risk-high gain research will push the frontiers of sustainable and green chemistry and reach well beyond state of the art in this area. This universal, flexible and iterative approach is anticipated to give rise to a variety of similar systems targeting diverse product outcomes starting from renewables.
Summary
Amines are crucially important classes of chemicals, widely present in pharmaceuticals, agrochemicals and surfactants. Yet, surprisingly, a systematic approach to obtaining this essential class of compounds from renewables has not been realized to date.
The aim of this proposal is to enable chemical pathways for the production of amines through alcohols from renewable resources, preferably lignocellulose waste. Two key scientific challenges will be addressed: The development of efficient cleavage reactions of complex renewable resources by novel heterogeneous catalysts; and finding new homogeneous catalyst based on earth-abundant metals for the atom-economic coupling of the derived alcohol building blocks directly with ammonia as well as possible further functionalization reactions. The program is divided into 3 interrelated but not mutually dependent work packages, each research addressing a key challenge in their respective fields, these are:
WP1: Lignin conversion to aromatics; WP2: Cellulose-derived platform chemicals to aromatic and aliphatic diols and solvents. WP3: New iron-based homogeneous catalysts for the direct, atom-economic C-O to C-N transformations.
The approach taken will embrace the inherent complexity present in the renewable feedstock. A unique balance between cleavage and coupling pathways will allow to access chemical diversity in products that is necessary to achieve economic competitiveness with current fossil fuel-based pathways and will permit rapid conversion to higher value products such as functionalized amines that can enter the chemical supply chain at a much later stage than bulk chemicals derived from petroleum. The proposed high risk-high gain research will push the frontiers of sustainable and green chemistry and reach well beyond state of the art in this area. This universal, flexible and iterative approach is anticipated to give rise to a variety of similar systems targeting diverse product outcomes starting from renewables.
Max ERC Funding
1 500 000 €
Duration
Start date: 2016-05-01, End date: 2022-04-30
Project acronym COHORT
Project The demography of skills and beliefs in Europe with a focus on cohort change
Researcher (PI) Vegard Fykse Skirbekk
Host Institution (HI) INTERNATIONALES INSTITUT FUER ANGEWANDTE SYSTEMANALYSE
Country Austria
Call Details Starting Grant (StG), SH3, ERC-2009-StG
Summary The central research theme of this proposal is the study of social change (skills, productivity, attitudes and beliefs) in Europe along cohort lines and as a function of changing age composition. Using demographic methods, age-specific and cohort-specific changes shall be quantitatively disentangled. The impact of migration flows as well as fertility differentials combined with intergenerational transmissions will be taken into account. It is expected that viewed together, these analyses will result in significant new insights and represent frontier research about likely social and economic challenges associated with ageing and demographic change in Europe and the appropriate policies for coping with them. Unlike projections of long-term economic growth or energy use, demographic forecasts tend to have comparatively low margins of error, even for forecasts half a century ahead. Traits that change systematically along age or cohort lines may therefore be projected with some degree of accuracy, which in turn can allow governments and individuals to better foresee and improve policies for predictable social change. The study will investigate two major topics, the first relating to human capital, skills, and work performance; the second relating to beliefs and attitudes in Europe. Understanding age variation in productivity and how to improve senior workers skills and capacities are paramount for ageing countries. Moreover, individual-level demographic behaviour can have aggregate level implications, including changing societal values and belief structures. The binding element is how such projections will improve one s capacity to foresee and hence develop more targeted policies that relate to ageing societies.
Summary
The central research theme of this proposal is the study of social change (skills, productivity, attitudes and beliefs) in Europe along cohort lines and as a function of changing age composition. Using demographic methods, age-specific and cohort-specific changes shall be quantitatively disentangled. The impact of migration flows as well as fertility differentials combined with intergenerational transmissions will be taken into account. It is expected that viewed together, these analyses will result in significant new insights and represent frontier research about likely social and economic challenges associated with ageing and demographic change in Europe and the appropriate policies for coping with them. Unlike projections of long-term economic growth or energy use, demographic forecasts tend to have comparatively low margins of error, even for forecasts half a century ahead. Traits that change systematically along age or cohort lines may therefore be projected with some degree of accuracy, which in turn can allow governments and individuals to better foresee and improve policies for predictable social change. The study will investigate two major topics, the first relating to human capital, skills, and work performance; the second relating to beliefs and attitudes in Europe. Understanding age variation in productivity and how to improve senior workers skills and capacities are paramount for ageing countries. Moreover, individual-level demographic behaviour can have aggregate level implications, including changing societal values and belief structures. The binding element is how such projections will improve one s capacity to foresee and hence develop more targeted policies that relate to ageing societies.
Max ERC Funding
981 415 €
Duration
Start date: 2009-10-01, End date: 2015-03-31
Project acronym CROME
Project Crossed Memories, Politics of Silence: The Colonial-Liberation Wars in Postcolonial Times
Researcher (PI) Miguel Goncalo CARDINA
Host Institution (HI) CENTRO DE ESTUDOS SOCIAIS
Country Portugal
Call Details Starting Grant (StG), SH6, ERC-2016-STG
Summary Colonial-Liberation Wars generate plural memories, conflicting evocations and persisting amnesias. The project’s main challenge is to produce innovative knowledge about the memories of the wars fought by the Portuguese state and pro-independence African movements between 1961 and 1974/5. The approach chosen is simultaneously diachronic and comparative, inasmuch as it contrasts changes that took place between the end of the conflicts and nowadays, regarding how wars, colonial pasts and anticolonial legacies have been remembered and silenced in Portugal, Angola, Mozambique, Guinea-Bissau, Cape Verde and São Tomé and Principe. The key hypothesis is that wars - as pivotal moments that ended the cycle of Empire in Portugal and started the cycle of African independences in the former Portuguese colonies - triggered memorialisation and silencing processes which had their own historicity.
CROME is divided into two strands. The first one, named ‘Colonial Wars, Postcolonial States’, looks at the role played by the states under consideration in mobilising, articulating and recognising the past, but also in actively generating selective representations. ‘Memory as a battlefield’ is the second strand, which will highlight distinct uses of the past and dynamics between social memories and individual memories.
The project intends to demonstrate how wars gave rise to multiple memories and conflicting historical judgements, mostly in Portugal, but also to examine how the specific nature of the (post-)colonial histories of each African country has generated different ways to summon war memories and (anti-)colonial legacies. CROME will, thus, put forward a ground-breaking perspective in terms of colonial-liberation war studies, and will be instrumental in dealing with such traumatic experience, for its comparative approach might help overcoming everlasting constraints still at play today, caused by the historical burden European colonialism left behind.
Summary
Colonial-Liberation Wars generate plural memories, conflicting evocations and persisting amnesias. The project’s main challenge is to produce innovative knowledge about the memories of the wars fought by the Portuguese state and pro-independence African movements between 1961 and 1974/5. The approach chosen is simultaneously diachronic and comparative, inasmuch as it contrasts changes that took place between the end of the conflicts and nowadays, regarding how wars, colonial pasts and anticolonial legacies have been remembered and silenced in Portugal, Angola, Mozambique, Guinea-Bissau, Cape Verde and São Tomé and Principe. The key hypothesis is that wars - as pivotal moments that ended the cycle of Empire in Portugal and started the cycle of African independences in the former Portuguese colonies - triggered memorialisation and silencing processes which had their own historicity.
CROME is divided into two strands. The first one, named ‘Colonial Wars, Postcolonial States’, looks at the role played by the states under consideration in mobilising, articulating and recognising the past, but also in actively generating selective representations. ‘Memory as a battlefield’ is the second strand, which will highlight distinct uses of the past and dynamics between social memories and individual memories.
The project intends to demonstrate how wars gave rise to multiple memories and conflicting historical judgements, mostly in Portugal, but also to examine how the specific nature of the (post-)colonial histories of each African country has generated different ways to summon war memories and (anti-)colonial legacies. CROME will, thus, put forward a ground-breaking perspective in terms of colonial-liberation war studies, and will be instrumental in dealing with such traumatic experience, for its comparative approach might help overcoming everlasting constraints still at play today, caused by the historical burden European colonialism left behind.
Max ERC Funding
1 478 249 €
Duration
Start date: 2017-02-01, End date: 2023-01-31
Project acronym CT
Project ‘Challenging Time(s)’ – A New Approach to Written Sources for Ancient Egyptian Chronology
Researcher (PI) Roman GUNDACKER
Host Institution (HI) OESTERREICHISCHE AKADEMIE DER WISSENSCHAFTEN
Country Austria
Call Details Starting Grant (StG), SH6, ERC-2017-STG
Summary The chronology of ancient Egypt is a golden thread for the memory of early civilisation. It is not only the scaffolding of four millennia of Egyptian history, but also one of the pillars of the chronology of the entire ancient Near East and eastern Mediterranean. The basic division of Egyptian history into 31 dynasties was introduced by Manetho, an Egyptian historian (c. 280 BC) writing in Greek for the Ptolemaic kings. Despite the fact that this scheme was adopted by Egyptologists 200 years ago and remains in use until today, there has never been an in-depth analysis of Manetho’s kinglist and of the names in it. Until now, identifying the Greek renderings of royal names with their hieroglyphic counterparts was more or less educated guesswork. It is thus essential to introduce the principles of textual criticism, to evaluate royal names on a firm linguistic basis and to provide for the first time ever an Egyptological commentary on Manetho’s kinglist. Just like Manetho did long ago, now it is necessary to gather all inscriptional evidence on Egyptian history: dated inscriptions, biographic and prosopographic data of royalty and commoners, genuine Egyptian kinglists and annals. These data must be critically evaluated in context, their assignment to specific reigns must be reconsidered, and genealogies and sequences of officials must be reviewed. The results are not only important for Egyptian historical chronology and for our understanding of the Egyptian perception of history, but also for the interpretation of chronological data gained from archaeological excavations (material culture) and sciences (14C dates, which are interpreted on the basis of historical chronology, e.g., via ‘Bayesian modelling’). The applicant has already shown the significance of this approach in pilot studies on the pyramid age. Further work in cooperation with international specialists will thus shed new light on ancient sources in order to determine the chronology of early civilisation.
Summary
The chronology of ancient Egypt is a golden thread for the memory of early civilisation. It is not only the scaffolding of four millennia of Egyptian history, but also one of the pillars of the chronology of the entire ancient Near East and eastern Mediterranean. The basic division of Egyptian history into 31 dynasties was introduced by Manetho, an Egyptian historian (c. 280 BC) writing in Greek for the Ptolemaic kings. Despite the fact that this scheme was adopted by Egyptologists 200 years ago and remains in use until today, there has never been an in-depth analysis of Manetho’s kinglist and of the names in it. Until now, identifying the Greek renderings of royal names with their hieroglyphic counterparts was more or less educated guesswork. It is thus essential to introduce the principles of textual criticism, to evaluate royal names on a firm linguistic basis and to provide for the first time ever an Egyptological commentary on Manetho’s kinglist. Just like Manetho did long ago, now it is necessary to gather all inscriptional evidence on Egyptian history: dated inscriptions, biographic and prosopographic data of royalty and commoners, genuine Egyptian kinglists and annals. These data must be critically evaluated in context, their assignment to specific reigns must be reconsidered, and genealogies and sequences of officials must be reviewed. The results are not only important for Egyptian historical chronology and for our understanding of the Egyptian perception of history, but also for the interpretation of chronological data gained from archaeological excavations (material culture) and sciences (14C dates, which are interpreted on the basis of historical chronology, e.g., via ‘Bayesian modelling’). The applicant has already shown the significance of this approach in pilot studies on the pyramid age. Further work in cooperation with international specialists will thus shed new light on ancient sources in order to determine the chronology of early civilisation.
Max ERC Funding
1 499 992 €
Duration
Start date: 2018-03-01, End date: 2023-02-28
Project acronym CUMTAS
Project Customized Micro Total Analysis Systems to Study Human Phase I Metabolism
Researcher (PI) Tiina Marjukka Sikanen
Host Institution (HI) HELSINGIN YLIOPISTO
Country Finland
Call Details Starting Grant (StG), LS9, ERC-2012-StG_20111109
Summary The goal of this project is to develop inexpensive, high-throughput technology to screen the thus far unexplored metabolic interactions between environmental and household chemicals and clinically relevant drugs. The main influential focus will be on human phase I metabolism (redox reactions) of common toxicants like agrochemicals and plasticizers. On the basis of their structural resemblance to pharmaceuticals and endogenous compounds, many of these chemicals are suspected to have critical effects on cytochrome P450 metabolism which is the main detoxification route of pharmaceuticals in man. However, with the current analytical instrumentation, screening of such large chemical pool would take several years, and new chemicals would be introduced faster than the old ones are screened. Thus, the main technological goal of this project is to develop novel, practically zero-cost analytical instruments that enable characterization of a compound’s metabolic profile at very high speed (<1 min/sample). This goal is achieved through miniaturization and high degree of integration of analytical instrumentation by microfabrication means, an approach often called lab(oratory)-on-a-chip. The microfabricated arrays are envisioned to incorporate all analytical key functions required (i.e., sample pretreatment, metabolic reaction, separation of the reaction products, detection) on a single chip. Thanks to the reduced dimensions, the amount of chemical waste and consumption of expensive reagents are significantly reduced. In this project, several different microfabrication techniques, from delicate cleanroom processes to extremely simple printing techniques, will be exploited to produce smart microfluidic designs and multifunctional surfaces. Towards the end of the project, more focus will be put on “printable microfluidics” which provides a truly low-cost approach for fabrication of highly customized microfluidic assays. Numerical modelling is also an integral part of the work.
Summary
The goal of this project is to develop inexpensive, high-throughput technology to screen the thus far unexplored metabolic interactions between environmental and household chemicals and clinically relevant drugs. The main influential focus will be on human phase I metabolism (redox reactions) of common toxicants like agrochemicals and plasticizers. On the basis of their structural resemblance to pharmaceuticals and endogenous compounds, many of these chemicals are suspected to have critical effects on cytochrome P450 metabolism which is the main detoxification route of pharmaceuticals in man. However, with the current analytical instrumentation, screening of such large chemical pool would take several years, and new chemicals would be introduced faster than the old ones are screened. Thus, the main technological goal of this project is to develop novel, practically zero-cost analytical instruments that enable characterization of a compound’s metabolic profile at very high speed (<1 min/sample). This goal is achieved through miniaturization and high degree of integration of analytical instrumentation by microfabrication means, an approach often called lab(oratory)-on-a-chip. The microfabricated arrays are envisioned to incorporate all analytical key functions required (i.e., sample pretreatment, metabolic reaction, separation of the reaction products, detection) on a single chip. Thanks to the reduced dimensions, the amount of chemical waste and consumption of expensive reagents are significantly reduced. In this project, several different microfabrication techniques, from delicate cleanroom processes to extremely simple printing techniques, will be exploited to produce smart microfluidic designs and multifunctional surfaces. Towards the end of the project, more focus will be put on “printable microfluidics” which provides a truly low-cost approach for fabrication of highly customized microfluidic assays. Numerical modelling is also an integral part of the work.
Max ERC Funding
1 499 668 €
Duration
Start date: 2013-05-01, End date: 2019-02-28
