Project acronym 9 SALT
Project Reassessing Ninth Century Philosophy. A Synchronic Approach to the Logical Traditions
Researcher (PI) Christophe Florian Erismann
Host Institution (HI) UNIVERSITAT WIEN
Country Austria
Call Details Consolidator Grant (CoG), SH5, ERC-2014-CoG
Summary This project aims at a better understanding of the philosophical richness of ninth century thought using the unprecedented and highly innovative method of the synchronic approach. The hypothesis directing this synchronic approach is that studying together in parallel the four main philosophical traditions of the century – i.e. Latin, Greek, Syriac and Arabic – will bring results that the traditional enquiry limited to one tradition alone can never reach. This implies pioneering a new methodology to overcome the compartmentalization of research which prevails nowadays. Using this method is only possible because the four conditions of applicability – comparable intellectual environment, common text corpus, similar methodological perspective, commensurable problems – are fulfilled. The ninth century, a time of cultural renewal in the Carolingian, Byzantine and Abbasid empires, possesses the remarkable characteristic – which ensures commensurability – that the same texts, namely the writings of Aristotelian logic (mainly Porphyry’s Isagoge and Aristotle’s Categories) were read and commented upon in Latin, Greek, Syriac and Arabic alike.
Logic is fundamental to philosophical enquiry. The contested question is the human capacity to rationalise, analyse and describe the sensible reality, to understand the ontological structure of the world, and to define the types of entities which exist. The use of this unprecedented synchronic approach will allow us a deeper understanding of the positions, a clear identification of the a priori postulates of the philosophical debates, and a critical evaluation of the arguments used. It provides a unique opportunity to compare the different traditions and highlight the heritage which is common, to stress the specificities of each tradition when tackling philosophical issues and to discover the doctrinal results triggered by their mutual interactions, be they constructive (scholarly exchanges) or polemic (religious controversies).
Summary
This project aims at a better understanding of the philosophical richness of ninth century thought using the unprecedented and highly innovative method of the synchronic approach. The hypothesis directing this synchronic approach is that studying together in parallel the four main philosophical traditions of the century – i.e. Latin, Greek, Syriac and Arabic – will bring results that the traditional enquiry limited to one tradition alone can never reach. This implies pioneering a new methodology to overcome the compartmentalization of research which prevails nowadays. Using this method is only possible because the four conditions of applicability – comparable intellectual environment, common text corpus, similar methodological perspective, commensurable problems – are fulfilled. The ninth century, a time of cultural renewal in the Carolingian, Byzantine and Abbasid empires, possesses the remarkable characteristic – which ensures commensurability – that the same texts, namely the writings of Aristotelian logic (mainly Porphyry’s Isagoge and Aristotle’s Categories) were read and commented upon in Latin, Greek, Syriac and Arabic alike.
Logic is fundamental to philosophical enquiry. The contested question is the human capacity to rationalise, analyse and describe the sensible reality, to understand the ontological structure of the world, and to define the types of entities which exist. The use of this unprecedented synchronic approach will allow us a deeper understanding of the positions, a clear identification of the a priori postulates of the philosophical debates, and a critical evaluation of the arguments used. It provides a unique opportunity to compare the different traditions and highlight the heritage which is common, to stress the specificities of each tradition when tackling philosophical issues and to discover the doctrinal results triggered by their mutual interactions, be they constructive (scholarly exchanges) or polemic (religious controversies).
Max ERC Funding
1 998 566 €
Duration
Start date: 2015-09-01, End date: 2021-02-28
Project acronym BHIVE
Project Bio-derived HIgh Value polymers through novel Enzyme function
Researcher (PI) Emma Rusi Master
Host Institution (HI) AALTO KORKEAKOULUSAATIO SR
Country Finland
Call Details Consolidator Grant (CoG), LS9, ERC-2014-CoG
Summary Recent advances in systems-level study of cells and organisms have revealed the enormous potential to live more sustainably through better use of biological processes. Plants sustainably synthesize the most abundant and diverse materials on Earth. By applying recent advances in life science technology, we can better harness renewable plant resources and bioconversion processes, to develop environmentally and politically sustainable human enterprise and lifestyles. At the same time, the global market for high-value biochemicals and bioplastics from forest and agricultural sources is rapidly increasing, which presents new opportunities for forest and agricultural sectors.
The overall aim of BHIVE is to illuminate uncharted regions of genome and metagenome sequences to discover entirely new protein families that can be used to sustainably synthesize novel, high-value biomaterials from renewable plant resources. The approach will include three parallel research thrusts: 1) strategic analysis of transcriptome and metagenome sequences to identify proteins with entirely unknown function relevant to biomass (lignocellulose) transformation, 2) mapping of uncharted regions within phylogenetic trees of poorly characterized enzyme families with recognized potential to modify the chemistry and biophysical properties of plant polysaccharides, and 3) the design and development of novel enzyme screens to directly address the increasing limitations of existing assays to uncover entirely new protein functions. BHIVE will be unique in its undivided focus on characterizing lignocellulose-active proteins encoded by the 30-40% of un-annotated sequence, or genomic “dark matter”, typical of nearly all genome sequences. In this way, BHIVE tackles a key constraint to fully realizing the societal and environmental benefits of the genomics era.
Summary
Recent advances in systems-level study of cells and organisms have revealed the enormous potential to live more sustainably through better use of biological processes. Plants sustainably synthesize the most abundant and diverse materials on Earth. By applying recent advances in life science technology, we can better harness renewable plant resources and bioconversion processes, to develop environmentally and politically sustainable human enterprise and lifestyles. At the same time, the global market for high-value biochemicals and bioplastics from forest and agricultural sources is rapidly increasing, which presents new opportunities for forest and agricultural sectors.
The overall aim of BHIVE is to illuminate uncharted regions of genome and metagenome sequences to discover entirely new protein families that can be used to sustainably synthesize novel, high-value biomaterials from renewable plant resources. The approach will include three parallel research thrusts: 1) strategic analysis of transcriptome and metagenome sequences to identify proteins with entirely unknown function relevant to biomass (lignocellulose) transformation, 2) mapping of uncharted regions within phylogenetic trees of poorly characterized enzyme families with recognized potential to modify the chemistry and biophysical properties of plant polysaccharides, and 3) the design and development of novel enzyme screens to directly address the increasing limitations of existing assays to uncover entirely new protein functions. BHIVE will be unique in its undivided focus on characterizing lignocellulose-active proteins encoded by the 30-40% of un-annotated sequence, or genomic “dark matter”, typical of nearly all genome sequences. In this way, BHIVE tackles a key constraint to fully realizing the societal and environmental benefits of the genomics era.
Max ERC Funding
1 977 781 €
Duration
Start date: 2015-09-01, End date: 2020-12-31
Project acronym CATCH
Project Cross-dimensional Activation of Two-Dimensional Semiconductors for Photocatalytic Heterojunctions
Researcher (PI) Wei CAO
Host Institution (HI) OULUN YLIOPISTO
Country Finland
Call Details Consolidator Grant (CoG), PE8, ERC-2020-COG
Summary Spacetime defines existence and evolution of materials. A key path to human’s sustainability through materials innovation can hardly circumvent materials dimensionalities. Despite numerous studies in electrically distinct 2D semiconductors, the route to engage them in high-performance photocatalysts remains elusive. Herein, CATCH proposes a cross-dimensional activation strategy of 2D semiconductors to implement practical photocatalysis. It operates electronic structures of dimensionally paradoxical 2D semiconductors and spatially limited nD (n=0-2) guests, directs charge migration processes, mass-produces advanced catalysts and elucidates time-evolved catalysis. Synergic impacts crossing 2D-nD will lead to > 95%/hour rates for pollutant removal and >20% quantum efficiencies for H2 evolution under visible light. CATCH enumerates chemical coordination and writes reaction equations with sub-nanosecond precision.
CATCH employs density functional theory optimization and data mining prediction to select most probable heterojunctional peers from hetero/homo- dimensions. Through facile but efficient wet and dry synthesis, nanostructures will be bonded to basal planes or brinks of 2D slabs. CATCH benefits in-house techniques for product characterizations and refinements and emphasizes on cutting-edge in situ studies to unveil photocatalysis at advanced photon sources. Assisted with theoretical modelling, ambient and time-evolved experiments will illustrate photocatalytic dynamics and kinetics in mixed spacetime.
CATCH unites low-dimensional materials designs by counting physical and electronic merits from spacetime confinements. It metrologically elaborates photocatalysis in an elevated 2D+nD+t, alters passages of materials combinations crossing dimensions, and directs future photocatalyst designs. Standing on cross-dimensional materials innovation and photocatalysis study, CATCH breaks the deadlock of practical photocatalysis that eventually leads to sustainability.
Summary
Spacetime defines existence and evolution of materials. A key path to human’s sustainability through materials innovation can hardly circumvent materials dimensionalities. Despite numerous studies in electrically distinct 2D semiconductors, the route to engage them in high-performance photocatalysts remains elusive. Herein, CATCH proposes a cross-dimensional activation strategy of 2D semiconductors to implement practical photocatalysis. It operates electronic structures of dimensionally paradoxical 2D semiconductors and spatially limited nD (n=0-2) guests, directs charge migration processes, mass-produces advanced catalysts and elucidates time-evolved catalysis. Synergic impacts crossing 2D-nD will lead to > 95%/hour rates for pollutant removal and >20% quantum efficiencies for H2 evolution under visible light. CATCH enumerates chemical coordination and writes reaction equations with sub-nanosecond precision.
CATCH employs density functional theory optimization and data mining prediction to select most probable heterojunctional peers from hetero/homo- dimensions. Through facile but efficient wet and dry synthesis, nanostructures will be bonded to basal planes or brinks of 2D slabs. CATCH benefits in-house techniques for product characterizations and refinements and emphasizes on cutting-edge in situ studies to unveil photocatalysis at advanced photon sources. Assisted with theoretical modelling, ambient and time-evolved experiments will illustrate photocatalytic dynamics and kinetics in mixed spacetime.
CATCH unites low-dimensional materials designs by counting physical and electronic merits from spacetime confinements. It metrologically elaborates photocatalysis in an elevated 2D+nD+t, alters passages of materials combinations crossing dimensions, and directs future photocatalyst designs. Standing on cross-dimensional materials innovation and photocatalysis study, CATCH breaks the deadlock of practical photocatalysis that eventually leads to sustainability.
Max ERC Funding
1 999 946 €
Duration
Start date: 2021-05-01, End date: 2026-04-30
Project acronym CeraText
Project Tailoring Microstructure and Architecture to Build Ceramic Components with Unprecedented Damage Tolerance
Researcher (PI) Raul BERMEJO
Host Institution (HI) MONTANUNIVERSITAET LEOBEN
Country Austria
Call Details Consolidator Grant (CoG), PE8, ERC-2018-COG
Summary Advanced ceramics are often combined with metals, polymers or other ceramics to produce structural and functional systems with exceptional properties. Examples are resistors and capacitors in microelectronics, piezo-ceramic actuators in car injection devices, and bio-implants for hip joint replacements. However, a critical issue affecting the functionality, lifetime and reliability of such systems is the initiation and uncontrolled propagation of cracks in the brittle ceramic parts, yielding in some cases rejection rates up to 70% of components production.
The remarkable “damage tolerance” found in natural materials such as wood, bone or mollusc, has yet to be achieved in technical ceramics, where incipient damage is synonymous with catastrophic failure. Novel “multilayer designs” combining microstructure and architecture could change this situation. Recent work of the PI has shown that tuning the location of “protective” layers within a 3D multilayer ceramic can increase its fracture resistance by five times (from ~3.5 to ~17 MPa∙m1/2) relative to constituent bulk ceramic layers, while retaining high strength (~500 MPa). By orienting the grain structure, similar to the textured and organized microstructure found in natural systems such as nacre, the PI has shown that crack propagation can be controlled within the textured ceramic layer. Thus, I believe tailored microstructures with controlled grain boundaries engineered in a layer-by-layer 3D architectural design hold the key to a new generation of “damage tolerant” ceramics.
This proposal outlines a research program to establish new scientific principles for the fabrication of innovative ceramic components that exhibit unprecedented damage tolerance. The successful implementation of microstructural features (e.g. texture degree, tailored internal stresses, second phases, interfaces) in a layer-by-layer architecture will provide outstanding lifetime and reliability in both structural and functional ceramic devices.
Summary
Advanced ceramics are often combined with metals, polymers or other ceramics to produce structural and functional systems with exceptional properties. Examples are resistors and capacitors in microelectronics, piezo-ceramic actuators in car injection devices, and bio-implants for hip joint replacements. However, a critical issue affecting the functionality, lifetime and reliability of such systems is the initiation and uncontrolled propagation of cracks in the brittle ceramic parts, yielding in some cases rejection rates up to 70% of components production.
The remarkable “damage tolerance” found in natural materials such as wood, bone or mollusc, has yet to be achieved in technical ceramics, where incipient damage is synonymous with catastrophic failure. Novel “multilayer designs” combining microstructure and architecture could change this situation. Recent work of the PI has shown that tuning the location of “protective” layers within a 3D multilayer ceramic can increase its fracture resistance by five times (from ~3.5 to ~17 MPa∙m1/2) relative to constituent bulk ceramic layers, while retaining high strength (~500 MPa). By orienting the grain structure, similar to the textured and organized microstructure found in natural systems such as nacre, the PI has shown that crack propagation can be controlled within the textured ceramic layer. Thus, I believe tailored microstructures with controlled grain boundaries engineered in a layer-by-layer 3D architectural design hold the key to a new generation of “damage tolerant” ceramics.
This proposal outlines a research program to establish new scientific principles for the fabrication of innovative ceramic components that exhibit unprecedented damage tolerance. The successful implementation of microstructural features (e.g. texture degree, tailored internal stresses, second phases, interfaces) in a layer-by-layer architecture will provide outstanding lifetime and reliability in both structural and functional ceramic devices.
Max ERC Funding
1 985 000 €
Duration
Start date: 2019-05-01, End date: 2024-04-30
Project acronym CITRES
Project Chemistry and interface tailored lead-free relaxor thin films for energy storage capacitors
Researcher (PI) Marco Deluca
Host Institution (HI) MATERIALS CENTER LEOBEN FORSCHUNG GMBH
Country Austria
Call Details Consolidator Grant (CoG), PE8, ERC-2018-COG
Summary The goal of CITRES is to provide new energy storage devices with high power and energy density by developing novel multilayer ceramic capacitors (MLCCs) based on relaxor thin films (RTF).
Energy storage units for energy autonomous sensor systems for the Internet of Things (IoT) must possess high power and energy density to allow quick charge/recharge and long-time energy supply. Current energy storage devices cannot meet those demands: Batteries have large capacity but long charging/discharging times due to slow chemical reactions and ion diffusion. Ceramic dielectric capacitors – being based on ionic and electronic polarisation mechanisms – can deliver and take up power quickly, but store much less energy due to low dielectric breakdown strength (DBS), high losses, and leakage currents.
RTF are ideal candidates: (i) Thin film processing allows obtaining low porosity and defects, thus enhancing the DBS; (ii) slim polarisation hysteresis loops, intrinsic to relaxors, allow reducing the losses. High energy density can be achieved in RTF by maximising the polarisation and minimising the leakage currents. Both aspects are controlled by the amount, type and local distribution of chemical substituents in the RTF lattice, whereas the latter depends also on the chemistry of the electrode metal.
In CITRES, we will identify the influence of substituents on electric polarisation from atomic to macroscopic scale by combining multiscale atomistic modelling with advanced structural, chemical and electrical characterizations on several length scales both in the RTF bulk and at interfaces with various electrodes. This will allow for the first time the design of energy storage properties of RTF by chemical substitution and electrode selection.
The ground-breaking nature of CITRES resides in the design and realisation of RTF-based dielectric MLCCs with better energy storage performances than supercapacitors and batteries, thus enabling energy autonomy for IoT sensor systems.
Summary
The goal of CITRES is to provide new energy storage devices with high power and energy density by developing novel multilayer ceramic capacitors (MLCCs) based on relaxor thin films (RTF).
Energy storage units for energy autonomous sensor systems for the Internet of Things (IoT) must possess high power and energy density to allow quick charge/recharge and long-time energy supply. Current energy storage devices cannot meet those demands: Batteries have large capacity but long charging/discharging times due to slow chemical reactions and ion diffusion. Ceramic dielectric capacitors – being based on ionic and electronic polarisation mechanisms – can deliver and take up power quickly, but store much less energy due to low dielectric breakdown strength (DBS), high losses, and leakage currents.
RTF are ideal candidates: (i) Thin film processing allows obtaining low porosity and defects, thus enhancing the DBS; (ii) slim polarisation hysteresis loops, intrinsic to relaxors, allow reducing the losses. High energy density can be achieved in RTF by maximising the polarisation and minimising the leakage currents. Both aspects are controlled by the amount, type and local distribution of chemical substituents in the RTF lattice, whereas the latter depends also on the chemistry of the electrode metal.
In CITRES, we will identify the influence of substituents on electric polarisation from atomic to macroscopic scale by combining multiscale atomistic modelling with advanced structural, chemical and electrical characterizations on several length scales both in the RTF bulk and at interfaces with various electrodes. This will allow for the first time the design of energy storage properties of RTF by chemical substitution and electrode selection.
The ground-breaking nature of CITRES resides in the design and realisation of RTF-based dielectric MLCCs with better energy storage performances than supercapacitors and batteries, thus enabling energy autonomy for IoT sensor systems.
Max ERC Funding
1 996 519 €
Duration
Start date: 2019-04-01, End date: 2024-03-31
Project acronym CrowdLand
Project Harnessing the power of crowdsourcing to improve land cover and land-use information
Researcher (PI) Steffen Martin Fritz
Host Institution (HI) INTERNATIONALES INSTITUT FUER ANGEWANDTE SYSTEMANALYSE
Country Austria
Call Details Consolidator Grant (CoG), SH3, ERC-2013-CoG
Summary Information about land cover, land use and the change over time is used for a wide range of applications such as nature protection and biodiversity, forest and water management, urban and transport planning, natural hazard prevention and mitigation, agricultural policies and monitoring climate change. Furthermore, high quality spatially explicit information on land cover change is an essential input variable to land use change modelling, which is increasingly being used to better understand the potential impact of certain policies. The amount of observed land cover change also serves as an important indicator of how well different regional, national and European policies have been implemented.
However, outside Europe and outside the developed world in particular, information on land cover and land cover change in poorer countries is hardly available and no national or regional dense sample based monitoring approaches such as LUCAS exists which deliver sufficiently accurate land cover and land cover change information. Moreover in particular in developing countries, there is no or very little information on land-use and crop management. Only very limited data available from FAO and an incomplete coverage of sub-national statistics (e.g. IFPRI) are available.
This research project will assess the potential of using crowdsourcing to close these big data gaps in developing and developed countries with a number of case studies and different data collection methods. The CrowdLand project will be carried out in two very different environments, i.e. Austria and Kenya.The overall research objectives of this project are to 1) test the potential of using social gaming to collect land use information 2) test the potential of using mobile money to collect data in developing countries 3) understand the data quality collected via crowdsourcing 4) apply advanced methods to filter crowdsourced data in order to attain improved accuracy.
Summary
Information about land cover, land use and the change over time is used for a wide range of applications such as nature protection and biodiversity, forest and water management, urban and transport planning, natural hazard prevention and mitigation, agricultural policies and monitoring climate change. Furthermore, high quality spatially explicit information on land cover change is an essential input variable to land use change modelling, which is increasingly being used to better understand the potential impact of certain policies. The amount of observed land cover change also serves as an important indicator of how well different regional, national and European policies have been implemented.
However, outside Europe and outside the developed world in particular, information on land cover and land cover change in poorer countries is hardly available and no national or regional dense sample based monitoring approaches such as LUCAS exists which deliver sufficiently accurate land cover and land cover change information. Moreover in particular in developing countries, there is no or very little information on land-use and crop management. Only very limited data available from FAO and an incomplete coverage of sub-national statistics (e.g. IFPRI) are available.
This research project will assess the potential of using crowdsourcing to close these big data gaps in developing and developed countries with a number of case studies and different data collection methods. The CrowdLand project will be carried out in two very different environments, i.e. Austria and Kenya.The overall research objectives of this project are to 1) test the potential of using social gaming to collect land use information 2) test the potential of using mobile money to collect data in developing countries 3) understand the data quality collected via crowdsourcing 4) apply advanced methods to filter crowdsourced data in order to attain improved accuracy.
Max ERC Funding
1 397 200 €
Duration
Start date: 2014-04-01, End date: 2020-03-31
Project acronym DYNAMOF
Project Electric Field Assisted Dynamic MOF alignment and Crystal Assembly
Researcher (PI) Jia Min Chin
Host Institution (HI) UNIVERSITAT WIEN
Country Austria
Call Details Consolidator Grant (CoG), PE8, ERC-2020-COG
Summary Despite the staggering number of reports on Metal-Organic Frameworks (MOFs), we are still greatly limited in our ability to manipulate colloidal MOF particles and control MOF orientation. Reliable control of MOF crystal orientation is extremely important as the properties and functionality of most MOFs are highly dependent upon crystallographic direction due to lattice anisotropy. However, the effective exploitation of such functionality remains frustratingly out of reach.
Based on the novel concept of exploiting MOF anisotropic ion mobility and polarizability, DYNAMOF aims to establish a flexible toolbox of methods for both dynamic and static control over the orientation, alignment and deposition of MOF crystals, which can be integrated into other processing techniques, thus paving the way for major advancements in the performance of MOF materials, composites and devices.
The mechanisms of E-field alignment of MOF particles as well as colloidal interactions governing MOF plastic or liquid crystal assembly, non-classical crystal growth and oriented film formation will be studied to develop a comprehensive and revolutionary platform for orientational control of free-standing and supported MOF crystals. As a proof-of-concept, the implications of MOF alignment on the proton conduction of MOF composites will be tested to pave the way towards next-generation MOF proton exchange membranes.
This ambitious project, which straddles the disciplines of materials science, chemistry and physics, is expected to break new ground by removing a key barrier in our ability to manipulate MOF particles. The wider goal of DYNAMOF is to establish the principles and working methods for colloidal manipulation across a wide materials spectrum, by using MOFs as a versatile platform for expanding our understanding of colloidal materials. Given the ubiquity and importance of colloids in materials science and daily life, the success of DYNAMOF will therefore have far reaching impact.
Summary
Despite the staggering number of reports on Metal-Organic Frameworks (MOFs), we are still greatly limited in our ability to manipulate colloidal MOF particles and control MOF orientation. Reliable control of MOF crystal orientation is extremely important as the properties and functionality of most MOFs are highly dependent upon crystallographic direction due to lattice anisotropy. However, the effective exploitation of such functionality remains frustratingly out of reach.
Based on the novel concept of exploiting MOF anisotropic ion mobility and polarizability, DYNAMOF aims to establish a flexible toolbox of methods for both dynamic and static control over the orientation, alignment and deposition of MOF crystals, which can be integrated into other processing techniques, thus paving the way for major advancements in the performance of MOF materials, composites and devices.
The mechanisms of E-field alignment of MOF particles as well as colloidal interactions governing MOF plastic or liquid crystal assembly, non-classical crystal growth and oriented film formation will be studied to develop a comprehensive and revolutionary platform for orientational control of free-standing and supported MOF crystals. As a proof-of-concept, the implications of MOF alignment on the proton conduction of MOF composites will be tested to pave the way towards next-generation MOF proton exchange membranes.
This ambitious project, which straddles the disciplines of materials science, chemistry and physics, is expected to break new ground by removing a key barrier in our ability to manipulate MOF particles. The wider goal of DYNAMOF is to establish the principles and working methods for colloidal manipulation across a wide materials spectrum, by using MOFs as a versatile platform for expanding our understanding of colloidal materials. Given the ubiquity and importance of colloids in materials science and daily life, the success of DYNAMOF will therefore have far reaching impact.
Max ERC Funding
1 964 345 €
Duration
Start date: 2021-10-01, End date: 2026-09-30
Project acronym ETI
Project Epistemic Transitions in Islamic Philosophy, Theology and Science: From the 12th to the 19th Century
Researcher (PI) Jari Pekka Kaukua
Host Institution (HI) JYVASKYLAN YLIOPISTO
Country Finland
Call Details Consolidator Grant (CoG), SH5, ERC-2015-CoG
Summary Not very long ago, it was still common to hold that little of interest took place in Islamic philosophy, theology and science after the death of the Peripatetic commentator Averroes in 1198. Recent research has produced increasing evidence against this view, and experts now commonly agree that texts from the so-called post-classical period merit serious analysis. That evidence, however, is still fragmentary, and we lack a clear understanding of the large scale and long run development in the various fields of Islamic intellectual culture after the twelfth century.
This project will investigate debates concerning the nature and methods of knowledge in four of the most ambitious strands of Islamic theoretical thought, that is, philosophy, theology, natural science, and philosophically inclined Sufism. Its temporal scope extends from the end of the twelfth century to the beginning of the colonial era, and it focuses on foundational epistemological questions (how knowledge is defined, what criteria are used to distinguish it from less secure epistemic attitudes, what methods are identified as valid in the acquisition of knowledge) as well as questions concerning knowledge as the goal of our existence (in particular, whether perceptual experience is inherently valuable).
Our study of the four strands is based on the hypothesis that the post-classical period is witness to a sophisticated discussion of knowledge, in which epistemic realism, intuitionism, phenomenalism, and subjectivism are pitted against each other in a nuanced manner. Hence, the project will result in a well-founded reassessment of the common view according to which post-classical Islamic intellectual culture is authoritarian and stuck to an epistemic paradigm that stifles insight and creativity. Thereby it will provide new ingredients for projects of endogenous reform and reorientation in Islam, and corroborate the view that our future histories of philosophy should incorporate the Islamic tradition.
Summary
Not very long ago, it was still common to hold that little of interest took place in Islamic philosophy, theology and science after the death of the Peripatetic commentator Averroes in 1198. Recent research has produced increasing evidence against this view, and experts now commonly agree that texts from the so-called post-classical period merit serious analysis. That evidence, however, is still fragmentary, and we lack a clear understanding of the large scale and long run development in the various fields of Islamic intellectual culture after the twelfth century.
This project will investigate debates concerning the nature and methods of knowledge in four of the most ambitious strands of Islamic theoretical thought, that is, philosophy, theology, natural science, and philosophically inclined Sufism. Its temporal scope extends from the end of the twelfth century to the beginning of the colonial era, and it focuses on foundational epistemological questions (how knowledge is defined, what criteria are used to distinguish it from less secure epistemic attitudes, what methods are identified as valid in the acquisition of knowledge) as well as questions concerning knowledge as the goal of our existence (in particular, whether perceptual experience is inherently valuable).
Our study of the four strands is based on the hypothesis that the post-classical period is witness to a sophisticated discussion of knowledge, in which epistemic realism, intuitionism, phenomenalism, and subjectivism are pitted against each other in a nuanced manner. Hence, the project will result in a well-founded reassessment of the common view according to which post-classical Islamic intellectual culture is authoritarian and stuck to an epistemic paradigm that stifles insight and creativity. Thereby it will provide new ingredients for projects of endogenous reform and reorientation in Islam, and corroborate the view that our future histories of philosophy should incorporate the Islamic tradition.
Max ERC Funding
1 526 429 €
Duration
Start date: 2016-09-01, End date: 2021-08-31
Project acronym ForceMorph
Project The integration of cell signalling and mechanical forces in vascular morphology
Researcher (PI) Cecilia Maria SAHLGREN
Host Institution (HI) ABO AKADEMI
Country Finland
Call Details Consolidator Grant (CoG), LS9, ERC-2017-COG
Summary Cardiovascular diseases represent the principal worldwide medical challenge of the 21st century (WHO), and new concepts to treat, predict and even prevent these diseases are needed. Structural remodelling of the vasculature in response to changes in blood flow is important to maintain mechanical homeostasis, and many diseases are related to defects in tissue morphology and mechanical imbalance. Signalling between endothelial cells (ECs) and vascular smooth muscle cells (VSMCs) via the Notch pathway regulates the morphology and structural remodelling of the arterial wall. Importantly, Notch offers handles for therapeutic control and thus opportunities for treatment of malformation and adaptation. However, we lack the essential understanding of how hemodynamic forces integrate with Notch signalling to rationally and responsibly target Notch in vascular therapies. The complexity of the problem requires new tools and an interdisciplinary approach. Our project integrates engineering, computational modelling, with cell biology and in vivo model systems to address the question. In vivo models will validate the in in vitro model systems to ensure that they are reproducible and reflect the reality. Through this integrated approach we will enable new therapeutic developments.
The specific objectives of the project are to:
1) Study EC-VSMC signalling real time, at high resolution by a novel biomimetic 4D Artery-on-Chip that recapitulates the cell-composition, -organisation and hemodynamic forces of the physiological artery
2) Develop a computational model of the arterial wall that include the mechanosensitivity of Notch signalling to predict how the complex interactions affect arterial morphology and remodelling
3) Use in vivo animal models to elucidate how regulation of Notch signalling affects tissue morphology and remodelling in response to changes in hemodynamic conditions
Summary
Cardiovascular diseases represent the principal worldwide medical challenge of the 21st century (WHO), and new concepts to treat, predict and even prevent these diseases are needed. Structural remodelling of the vasculature in response to changes in blood flow is important to maintain mechanical homeostasis, and many diseases are related to defects in tissue morphology and mechanical imbalance. Signalling between endothelial cells (ECs) and vascular smooth muscle cells (VSMCs) via the Notch pathway regulates the morphology and structural remodelling of the arterial wall. Importantly, Notch offers handles for therapeutic control and thus opportunities for treatment of malformation and adaptation. However, we lack the essential understanding of how hemodynamic forces integrate with Notch signalling to rationally and responsibly target Notch in vascular therapies. The complexity of the problem requires new tools and an interdisciplinary approach. Our project integrates engineering, computational modelling, with cell biology and in vivo model systems to address the question. In vivo models will validate the in in vitro model systems to ensure that they are reproducible and reflect the reality. Through this integrated approach we will enable new therapeutic developments.
The specific objectives of the project are to:
1) Study EC-VSMC signalling real time, at high resolution by a novel biomimetic 4D Artery-on-Chip that recapitulates the cell-composition, -organisation and hemodynamic forces of the physiological artery
2) Develop a computational model of the arterial wall that include the mechanosensitivity of Notch signalling to predict how the complex interactions affect arterial morphology and remodelling
3) Use in vivo animal models to elucidate how regulation of Notch signalling affects tissue morphology and remodelling in response to changes in hemodynamic conditions
Max ERC Funding
1 919 599 €
Duration
Start date: 2018-03-01, End date: 2023-02-28
Project acronym FREEDLES
Project From needles to landscapes: a novel approach to scaling forest spectra
Researcher (PI) Miina Alina RAUTIAINEN
Host Institution (HI) AALTO KORKEAKOULUSAATIO SR
Country Finland
Call Details Consolidator Grant (CoG), LS9, ERC-2017-COG
Summary Accounting for vegetation structure – clumping of foliage into shoots or crowns – is the largest remaining challenge in modelling scattered and absorbed radiation in complex vegetation canopies such as forests. Clumping controls the radiation regime of forest canopies, yet it is poorly quantified. Currently, the communities working with vegetation structure and optical measurements do not have a common understanding of the concept. The FREEDLES project sets out to develop a universal method for quantifying clumping of foliage in forests based on detailed 3D structure and spectral reflectance data. Clumping will be linked to photon recollision probability, an exciting new development in the field of photon transport modelling. Photon recollision probability will, in turn, be used to develop a spectral scaling algorithm which will connect the spectra of vegetation at all hierarchical levels from needles and leaves to crowns, stands and landscapes. The spectral scaling algorithm will be validated with detailed reference measurements in both laboratory and natural conditions, and applied to interpret forest variables from satellite images at different spatial resolutions. The proposed approach is contrary to many other lines of current development where more complexity is favoured in canopy radiation models. If successful, the approach will significantly improve estimates of absorbed and scattered radiation fields in forests and retrieval results of forest biophysical variables from satellite data. Future applications can also be expected in global radiation and carbon balance estimation and in chlorophyll fluorescence models for forests. Most importantly, the spectral scaling model will open new horizons for our scientific understanding of photon-vegetation interactions.
Summary
Accounting for vegetation structure – clumping of foliage into shoots or crowns – is the largest remaining challenge in modelling scattered and absorbed radiation in complex vegetation canopies such as forests. Clumping controls the radiation regime of forest canopies, yet it is poorly quantified. Currently, the communities working with vegetation structure and optical measurements do not have a common understanding of the concept. The FREEDLES project sets out to develop a universal method for quantifying clumping of foliage in forests based on detailed 3D structure and spectral reflectance data. Clumping will be linked to photon recollision probability, an exciting new development in the field of photon transport modelling. Photon recollision probability will, in turn, be used to develop a spectral scaling algorithm which will connect the spectra of vegetation at all hierarchical levels from needles and leaves to crowns, stands and landscapes. The spectral scaling algorithm will be validated with detailed reference measurements in both laboratory and natural conditions, and applied to interpret forest variables from satellite images at different spatial resolutions. The proposed approach is contrary to many other lines of current development where more complexity is favoured in canopy radiation models. If successful, the approach will significantly improve estimates of absorbed and scattered radiation fields in forests and retrieval results of forest biophysical variables from satellite data. Future applications can also be expected in global radiation and carbon balance estimation and in chlorophyll fluorescence models for forests. Most importantly, the spectral scaling model will open new horizons for our scientific understanding of photon-vegetation interactions.
Max ERC Funding
1 963 590 €
Duration
Start date: 2018-05-01, End date: 2023-04-30
