Project acronym 3D2DPrint
Project 3D Printing of Novel 2D Nanomaterials: Adding Advanced 2D Functionalities to Revolutionary Tailored 3D Manufacturing
Researcher (PI) Valeria Nicolosi
Host Institution (HI) THE PROVOST, FELLOWS, FOUNDATION SCHOLARS & THE OTHER MEMBERS OF BOARD OF THE COLLEGE OF THE HOLY & UNDIVIDED TRINITY OF QUEEN ELIZABETH NEAR DUBLIN
Call Details Consolidator Grant (CoG), PE8, ERC-2015-CoG
Summary My vision is to establish, within the framework of an ERC CoG, a multidisciplinary group which will work in concert towards pioneering the integration of novel 2-Dimensional nanomaterials with novel additive fabrication techniques to develop a unique class of energy storage devices.
Batteries and supercapacitors are two very complementary types of energy storage devices. Batteries store much higher energy densities; supercapacitors, on the other hand, hold one tenth of the electricity per unit of volume or weight as compared to batteries but can achieve much higher power densities. Technology is currently striving to improve the power density of batteries and the energy density of supercapacitors. To do so it is imperative to develop new materials, chemistries and manufacturing strategies.
3D2DPrint aims to develop micro-energy devices (both supercapacitors and batteries), technologies particularly relevant in the context of the emergent industry of micro-electro-mechanical systems and constantly downsized electronics. We plan to use novel two-dimensional (2D) nanomaterials obtained by liquid-phase exfoliation. This method offers a new, economic and easy way to prepare ink of a variety of 2D systems, allowing to produce wide device performance window through elegant and simple constituent control at the point of fabrication. 3D2DPrint will use our expertise and know-how to allow development of advanced AM methods to integrate dissimilar nanomaterial blends and/or “hybrids” into fully embedded 3D printed energy storage devices, with the ultimate objective to realise a range of products that contain the above described nanomaterials subcomponent devices, electrical connections and traditional micro-fabricated subcomponents (if needed) ideally using a single tool.
Summary
My vision is to establish, within the framework of an ERC CoG, a multidisciplinary group which will work in concert towards pioneering the integration of novel 2-Dimensional nanomaterials with novel additive fabrication techniques to develop a unique class of energy storage devices.
Batteries and supercapacitors are two very complementary types of energy storage devices. Batteries store much higher energy densities; supercapacitors, on the other hand, hold one tenth of the electricity per unit of volume or weight as compared to batteries but can achieve much higher power densities. Technology is currently striving to improve the power density of batteries and the energy density of supercapacitors. To do so it is imperative to develop new materials, chemistries and manufacturing strategies.
3D2DPrint aims to develop micro-energy devices (both supercapacitors and batteries), technologies particularly relevant in the context of the emergent industry of micro-electro-mechanical systems and constantly downsized electronics. We plan to use novel two-dimensional (2D) nanomaterials obtained by liquid-phase exfoliation. This method offers a new, economic and easy way to prepare ink of a variety of 2D systems, allowing to produce wide device performance window through elegant and simple constituent control at the point of fabrication. 3D2DPrint will use our expertise and know-how to allow development of advanced AM methods to integrate dissimilar nanomaterial blends and/or “hybrids” into fully embedded 3D printed energy storage devices, with the ultimate objective to realise a range of products that contain the above described nanomaterials subcomponent devices, electrical connections and traditional micro-fabricated subcomponents (if needed) ideally using a single tool.
Max ERC Funding
2 499 942 €
Duration
Start date: 2016-10-01, End date: 2021-09-30
Project acronym AFIRMATIVE
Project Acoustic-Flow Interaction Models for Advancing Thermoacoustic Instability prediction in Very low Emission combustors
Researcher (PI) Aimee MORGANS
Host Institution (HI) IMPERIAL COLLEGE OF SCIENCE TECHNOLOGY AND MEDICINE
Call Details Consolidator Grant (CoG), PE8, ERC-2017-COG
Summary Gas turbines are an essential ingredient in the long-term energy and aviation mix. They are flexible, offer fast start-up and the ability to burn renewable-generated fuels. However, they generate NOx emissions, which cause air pollution and damage human health, and reducing these is an air quality imperative. A major hurdle to this is that lean premixed combustion, essential for further NOx emission reductions, is highly susceptible to thermoacoustic instability. This is caused by a two-way coupling between unsteady combustion and acoustic waves, and the resulting large pressure oscillations can cause severe mechanical damage. Computational methods for predicting thermoacoustic instability, fast and accurate enough to be used as part of the industrial design process, are urgently needed.
The only computational methods with the prospect of being fast enough are those based on coupled treatment of the acoustic waves and unsteady combustion. These exploit the amenity of the acoustic waves to analytical modelling, allowing costly simulations to be directed only at the more complex flame. They show real promise: my group recently demonstrated the first accurate coupled predictions for lab-scale combustors. The method does not yet extend to industrial combustors, the more complex flow-fields in these rendering current acoustic models overly-simplistic. I propose to comprehensively overhaul acoustic models across the entirety of the combustor, accounting for real and important acoustic-flow interactions. These new models will offer the breakthrough prospect of extending efficient, accurate predictive capability to industrial combustors, which has a real chance of facilitating future, instability free, very low NOx gas turbines.
Summary
Gas turbines are an essential ingredient in the long-term energy and aviation mix. They are flexible, offer fast start-up and the ability to burn renewable-generated fuels. However, they generate NOx emissions, which cause air pollution and damage human health, and reducing these is an air quality imperative. A major hurdle to this is that lean premixed combustion, essential for further NOx emission reductions, is highly susceptible to thermoacoustic instability. This is caused by a two-way coupling between unsteady combustion and acoustic waves, and the resulting large pressure oscillations can cause severe mechanical damage. Computational methods for predicting thermoacoustic instability, fast and accurate enough to be used as part of the industrial design process, are urgently needed.
The only computational methods with the prospect of being fast enough are those based on coupled treatment of the acoustic waves and unsteady combustion. These exploit the amenity of the acoustic waves to analytical modelling, allowing costly simulations to be directed only at the more complex flame. They show real promise: my group recently demonstrated the first accurate coupled predictions for lab-scale combustors. The method does not yet extend to industrial combustors, the more complex flow-fields in these rendering current acoustic models overly-simplistic. I propose to comprehensively overhaul acoustic models across the entirety of the combustor, accounting for real and important acoustic-flow interactions. These new models will offer the breakthrough prospect of extending efficient, accurate predictive capability to industrial combustors, which has a real chance of facilitating future, instability free, very low NOx gas turbines.
Max ERC Funding
1 985 288 €
Duration
Start date: 2018-06-01, End date: 2023-05-31
Project acronym AMETIST
Project Advanced III-V Materials and Processes Enabling Ultrahigh-efficiency ( 50%) Photovoltaics
Researcher (PI) Mircea Dorel GUINA
Host Institution (HI) TAMPEREEN KORKEAKOULUSAATIO SR
Call Details Advanced Grant (AdG), PE8, ERC-2015-AdG
Summary Compound semiconductor solar cells are providing the highest photovoltaic conversion efficiency, yet their performance lacks far behind the theoretical potential. This is a position we will challenge by engineering advanced III-V optoelectronics materials and heterostructures for better utilization of the solar spectrum, enabling efficiencies approaching practical limits. The work is strongly motivated by the global need for renewable energy sources. To this end, AMETIST framework is based on three vectors of excellence in: i) material science and epitaxial processes, ii) advanced solar cells exploiting nanophotonics concepts, and iii) new device fabrication technologies.
Novel heterostructures (e.g. GaInNAsSb, GaNAsBi), providing absorption in a broad spectral range from 0.7 eV to 1.4 eV, will be synthesized and monolithically integrated in tandem cells with up to 8-junctions. Nanophotonic methods for light-trapping, spectral and spatial control of solar radiation will be developed to further enhance the absorption. To ensure a high long-term impact, the project will validate the use of state-of-the-art molecular-beam-epitaxy processes for fabrication of economically viable ultra-high efficiency solar cells. The ultimate efficiency target is to reach a level of 55%. This would enable to generate renewable/ecological/sustainable energy at a levelized production cost below ~7 ¢/kWh, comparable or cheaper than fossil fuels. The work will also bring a new breath of developments for more efficient space photovoltaic systems.
AMETIST will leverage the leading position of the applicant in topical technology areas relevant for the project (i.e. epitaxy of III-N/Bi-V alloys and key achievements concerning GaInNAsSb-based tandem solar cells). Thus it renders a unique opportunity to capitalize on the group expertize and position Europe at the forefront in the global competition for demonstrating more efficient and economically viable photovoltaic technologies.
Summary
Compound semiconductor solar cells are providing the highest photovoltaic conversion efficiency, yet their performance lacks far behind the theoretical potential. This is a position we will challenge by engineering advanced III-V optoelectronics materials and heterostructures for better utilization of the solar spectrum, enabling efficiencies approaching practical limits. The work is strongly motivated by the global need for renewable energy sources. To this end, AMETIST framework is based on three vectors of excellence in: i) material science and epitaxial processes, ii) advanced solar cells exploiting nanophotonics concepts, and iii) new device fabrication technologies.
Novel heterostructures (e.g. GaInNAsSb, GaNAsBi), providing absorption in a broad spectral range from 0.7 eV to 1.4 eV, will be synthesized and monolithically integrated in tandem cells with up to 8-junctions. Nanophotonic methods for light-trapping, spectral and spatial control of solar radiation will be developed to further enhance the absorption. To ensure a high long-term impact, the project will validate the use of state-of-the-art molecular-beam-epitaxy processes for fabrication of economically viable ultra-high efficiency solar cells. The ultimate efficiency target is to reach a level of 55%. This would enable to generate renewable/ecological/sustainable energy at a levelized production cost below ~7 ¢/kWh, comparable or cheaper than fossil fuels. The work will also bring a new breath of developments for more efficient space photovoltaic systems.
AMETIST will leverage the leading position of the applicant in topical technology areas relevant for the project (i.e. epitaxy of III-N/Bi-V alloys and key achievements concerning GaInNAsSb-based tandem solar cells). Thus it renders a unique opportunity to capitalize on the group expertize and position Europe at the forefront in the global competition for demonstrating more efficient and economically viable photovoltaic technologies.
Max ERC Funding
2 492 719 €
Duration
Start date: 2017-01-01, End date: 2021-12-31
Project acronym APRA
Project Active Polymers for Renewable Functional Actuators
Researcher (PI) Eugene TERENTJEV
Host Institution (HI) THE CHANCELLOR MASTERS AND SCHOLARS OF THE UNIVERSITY OF CAMBRIDGE
Call Details Advanced Grant (AdG), PE8, ERC-2017-ADG
Summary The idea of mechanical actuator based on intrinsic material properties of liquid-crystalline elastomers (rather than complex engineering of interacting components) has been understood for 20+ years. The remarkable characteristics of LCE actuation (fully reversible action; large-amplitude, with a stroke of 5%-300%; stress-strain-speed response almost exactly matching the human muscle) make it highly attractive in biomedical engineering, robotics, smart textiles, and other fields. Yet, there is a profound difficulty (bottleneck), which remains the reason why this concept has not found its way into any practical devices & applications. LCE actuation requires alignment (monodomain structure) of the local anisotropy in the permanently crosslinked polymer network - which has been impossible to achieve in any useful large-scale configuration except the flat film, due to the unavoidable restrictions of two competing processes: orientational alignment and network crosslinking.
Recently, we made a breakthrough, developing LCE vitrimers (polymer networks covalently crosslinked by a bond-exchange reaction). Vitrimers are much more stable than other transient elastomer networks, allow easy thermal re-moulding (making the material fully renewable), and permit molding of complex shapes with intricate local alignment (which are impossible in traditional elastomers). This project will bridge from the concept to technology, tuning the material design for robust nematic LCE vitrimers, imparting photo-actuation capacity with a controlled wavelength, and finally utilising them in practical-engineering actuator applications where the reversible mechanical action is stimulated by light, solvent exposure, or more traditionally - heat. These applications include (but not limited to): continuous spinning light-driven motor, tactile dynamic Braille display, capillary pump and toggle flow switch for microfuidics, active textile fibre, and heliotracking filament that always points at the Sun.
Summary
The idea of mechanical actuator based on intrinsic material properties of liquid-crystalline elastomers (rather than complex engineering of interacting components) has been understood for 20+ years. The remarkable characteristics of LCE actuation (fully reversible action; large-amplitude, with a stroke of 5%-300%; stress-strain-speed response almost exactly matching the human muscle) make it highly attractive in biomedical engineering, robotics, smart textiles, and other fields. Yet, there is a profound difficulty (bottleneck), which remains the reason why this concept has not found its way into any practical devices & applications. LCE actuation requires alignment (monodomain structure) of the local anisotropy in the permanently crosslinked polymer network - which has been impossible to achieve in any useful large-scale configuration except the flat film, due to the unavoidable restrictions of two competing processes: orientational alignment and network crosslinking.
Recently, we made a breakthrough, developing LCE vitrimers (polymer networks covalently crosslinked by a bond-exchange reaction). Vitrimers are much more stable than other transient elastomer networks, allow easy thermal re-moulding (making the material fully renewable), and permit molding of complex shapes with intricate local alignment (which are impossible in traditional elastomers). This project will bridge from the concept to technology, tuning the material design for robust nematic LCE vitrimers, imparting photo-actuation capacity with a controlled wavelength, and finally utilising them in practical-engineering actuator applications where the reversible mechanical action is stimulated by light, solvent exposure, or more traditionally - heat. These applications include (but not limited to): continuous spinning light-driven motor, tactile dynamic Braille display, capillary pump and toggle flow switch for microfuidics, active textile fibre, and heliotracking filament that always points at the Sun.
Max ERC Funding
2 012 136 €
Duration
Start date: 2018-10-01, End date: 2023-09-30
Project acronym ARTISTIC
Project Advanced and Reusable Theory for the In Silico-optimization of composite electrode fabrication processes for rechargeable battery Technologies with Innovative Chemistries
Researcher (PI) Alejandro Antonio FRANCO
Host Institution (HI) CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
Call Details Consolidator Grant (CoG), PE8, ERC-2017-COG
Summary The aim of this project is to develop and to demonstrate a novel theoretical framework devoted to rationalizing the formulation of composite electrodes containing next-generation material chemistries for high energy density secondary batteries. The framework will be established through the combination of discrete particle and continuum mathematical models within a multiscale computational workflow integrating the individual models and mimicking the different steps along the electrode fabrication process, including slurry preparation, drying and calendering. Strongly complemented by dedicated experimental characterizations which are devoted to its validation, the goal of this framework is to provide insights about the impacts of material properties and fabrication process parameters on the electrode mesostructures and their corresponding correlation to the resulting electrochemical performance. It targets self-organization mechanisms of material mixtures in slurries by considering the interactions between the active and conductive materials, solvent, binders and dispersants and the relationship between the materials properties such as surface chemistry and wettability. Optimal electrode formulation, fabrication process and the arising electrode mesostructure can then be achieved. Additionally, the framework will be integrated into an online and open access infrastructure, allowing predictive direct and reverse engineering for optimized electrode designs to attain high quality electrochemical performances. Through the demonstration of a multidisciplinary, flexible and transferable framework, this project has tremendous potential to provide insights leading to proposals of new and highly efficient industrial techniques for the fabrication of cheaper and reliable next-generation secondary battery electrodes for a wide spectrum of applications, including Electric Transportation.
Summary
The aim of this project is to develop and to demonstrate a novel theoretical framework devoted to rationalizing the formulation of composite electrodes containing next-generation material chemistries for high energy density secondary batteries. The framework will be established through the combination of discrete particle and continuum mathematical models within a multiscale computational workflow integrating the individual models and mimicking the different steps along the electrode fabrication process, including slurry preparation, drying and calendering. Strongly complemented by dedicated experimental characterizations which are devoted to its validation, the goal of this framework is to provide insights about the impacts of material properties and fabrication process parameters on the electrode mesostructures and their corresponding correlation to the resulting electrochemical performance. It targets self-organization mechanisms of material mixtures in slurries by considering the interactions between the active and conductive materials, solvent, binders and dispersants and the relationship between the materials properties such as surface chemistry and wettability. Optimal electrode formulation, fabrication process and the arising electrode mesostructure can then be achieved. Additionally, the framework will be integrated into an online and open access infrastructure, allowing predictive direct and reverse engineering for optimized electrode designs to attain high quality electrochemical performances. Through the demonstration of a multidisciplinary, flexible and transferable framework, this project has tremendous potential to provide insights leading to proposals of new and highly efficient industrial techniques for the fabrication of cheaper and reliable next-generation secondary battery electrodes for a wide spectrum of applications, including Electric Transportation.
Max ERC Funding
1 976 445 €
Duration
Start date: 2018-04-01, End date: 2023-03-31
Project acronym BATMAN
Project Development of Quantitative Metrologies to Guide Lithium Ion Battery Manufacturing
Researcher (PI) Vanessa Wood
Host Institution (HI) EIDGENOESSISCHE TECHNISCHE HOCHSCHULE ZUERICH
Call Details Starting Grant (StG), PE8, ERC-2015-STG
Summary Lithium ion batteries offer tremendous potential as an enabling technology for sustainable transportation and development. However, their widespread usage as the energy storage solution for electric mobility and grid-level integration of renewables is impeded by the fact that current state-of-the-art lithium ion batteries have energy densities that are too small, charge- and discharge rates that are too low, and costs that are too high. Highly publicized instances of catastrophic failure of lithium ion batteries raise questions of safety. Understanding the limitations to battery performance and origins of the degradation and failure is highly complex due to the difficulties in studying interrelated processes that take place at different length and time scales in a corrosive environment. In the project, we will (1) develop and implement quantitative methods to study the complex interrelations between structure and electrochemistry occurring at the nano-, micron-, and milli-scales in lithium ion battery active materials and electrodes, (2) conduct systematic experimental studies with our new techniques to understand the origins of performance limitations and to develop design guidelines for achieving high performance and safe batteries, and (3) investigate economically viable engineering solutions based on these guidelines to achieve high performance and safe lithium ion batteries.
Summary
Lithium ion batteries offer tremendous potential as an enabling technology for sustainable transportation and development. However, their widespread usage as the energy storage solution for electric mobility and grid-level integration of renewables is impeded by the fact that current state-of-the-art lithium ion batteries have energy densities that are too small, charge- and discharge rates that are too low, and costs that are too high. Highly publicized instances of catastrophic failure of lithium ion batteries raise questions of safety. Understanding the limitations to battery performance and origins of the degradation and failure is highly complex due to the difficulties in studying interrelated processes that take place at different length and time scales in a corrosive environment. In the project, we will (1) develop and implement quantitative methods to study the complex interrelations between structure and electrochemistry occurring at the nano-, micron-, and milli-scales in lithium ion battery active materials and electrodes, (2) conduct systematic experimental studies with our new techniques to understand the origins of performance limitations and to develop design guidelines for achieving high performance and safe batteries, and (3) investigate economically viable engineering solutions based on these guidelines to achieve high performance and safe lithium ion batteries.
Max ERC Funding
1 500 000 €
Duration
Start date: 2016-05-01, End date: 2021-04-30
Project acronym BCOOL
Project Barocaloric materials for energy-efficient solid-state cooling
Researcher (PI) Javier Eduardo Moya Raposo
Host Institution (HI) THE CHANCELLOR MASTERS AND SCHOLARS OF THE UNIVERSITY OF CAMBRIDGE
Call Details Starting Grant (StG), PE8, ERC-2015-STG
Summary Cooling is essential for food and drinks, medicine, electronics and thermal comfort. Thermal changes due to pressure-driven phase transitions in fluids have long been used in vapour compression systems to achieve continuous refrigeration and air conditioning, but their energy efficiency is relatively low, and the working fluids that are employed harm the environment when released to the atmosphere. More recently, the discovery of large thermal changes due to pressure-driven phase transitions in magnetic solids has led to suggestions for environmentally friendly solid-state cooling applications. However, for this new cooling technology to succeed, it is still necessary to find suitable barocaloric (BC) materials that satisfy the demanding requirements set by applications, namely very large thermal changes in inexpensive materials that occur near room temperature in response to small applied pressures.
I aim to develop new BC materials by exploiting phase transitions in non-magnetic solids whose structural and thermal properties are strongly coupled, namely ferroelectric salts, molecular crystals and hybrid materials. These materials are normally made from cheap abundant elements, and display very large latent heats and volume changes at structural phase transitions, which make them ideal candidates to exhibit extremely large BC effects that outperform those observed in state-of-the-art BC magnetic materials, and that match applications.
My unique approach combines: i) materials science to identify materials with outstanding BC performance, ii) advanced experimental techniques to explore and exploit these novel materials, iii) materials engineering to create new composite materials with enhanced BC properties, and iv) fabrication of BC devices, using insight gained from modelling of materials and device parameters. If successful, my ambitious strategy will culminate in revolutionary solid-state cooling devices that are environmentally friendly and energy efficient.
Summary
Cooling is essential for food and drinks, medicine, electronics and thermal comfort. Thermal changes due to pressure-driven phase transitions in fluids have long been used in vapour compression systems to achieve continuous refrigeration and air conditioning, but their energy efficiency is relatively low, and the working fluids that are employed harm the environment when released to the atmosphere. More recently, the discovery of large thermal changes due to pressure-driven phase transitions in magnetic solids has led to suggestions for environmentally friendly solid-state cooling applications. However, for this new cooling technology to succeed, it is still necessary to find suitable barocaloric (BC) materials that satisfy the demanding requirements set by applications, namely very large thermal changes in inexpensive materials that occur near room temperature in response to small applied pressures.
I aim to develop new BC materials by exploiting phase transitions in non-magnetic solids whose structural and thermal properties are strongly coupled, namely ferroelectric salts, molecular crystals and hybrid materials. These materials are normally made from cheap abundant elements, and display very large latent heats and volume changes at structural phase transitions, which make them ideal candidates to exhibit extremely large BC effects that outperform those observed in state-of-the-art BC magnetic materials, and that match applications.
My unique approach combines: i) materials science to identify materials with outstanding BC performance, ii) advanced experimental techniques to explore and exploit these novel materials, iii) materials engineering to create new composite materials with enhanced BC properties, and iv) fabrication of BC devices, using insight gained from modelling of materials and device parameters. If successful, my ambitious strategy will culminate in revolutionary solid-state cooling devices that are environmentally friendly and energy efficient.
Max ERC Funding
1 467 521 €
Duration
Start date: 2016-04-01, End date: 2021-03-31
Project acronym BIAF
Project Bird Inspired Autonomous Flight
Researcher (PI) Shane Paul Windsor
Host Institution (HI) UNIVERSITY OF BRISTOL
Call Details Starting Grant (StG), PE8, ERC-2015-STG
Summary The agile and efficient flight of birds shows what flight performance is physically possible, and in theory could be achieved by unmanned air vehicles (UAVs) of the same size. The overall aim of this project is to enhance the performance of small scale UAVs by developing novel technologies inspired by understanding how birds are adapted to interact with airflows. Small UAVs have the potential to dramatically change current practices in many areas such as, search and rescue, surveillance, and environmental monitoring. Currently the utility of these systems is limited by their operational endurance and their inability to operate in strong turbulent winds, especially those that often occur in urban environments. Birds are adapted to be able to fly in these conditions and actually use them to their advantage to minimise their energy output.
This project is composed of three tracks which contain elements of technology development, as well as scientific investigation looking at bird flight behaviour and aerodynamics. The first track looks at developing path planning algorithms for UAVs in urban environments based on how birds fly in these areas, by using GPS tracking and computational fluid dynamics alongside trajectory optimization. The second track aims to develop artificial wings with improved gust tolerance inspired by the features of feathered wings. Here, high speed video measurements of birds flying through gusts will be used alongside wind tunnel testing of artificial wings to discover what features of a bird’s wing help to alleviate gusts. The third track develops novel force and flow sensor arrays for autonomous flight control based on the sensor arrays found in flying animals. These arrays will be used to make UAVs with increased agility and robustness. This unique bird inspired approach uses biology to show what is possible, and engineering to find the features that enable this performance and develop them into functional technologies.
Summary
The agile and efficient flight of birds shows what flight performance is physically possible, and in theory could be achieved by unmanned air vehicles (UAVs) of the same size. The overall aim of this project is to enhance the performance of small scale UAVs by developing novel technologies inspired by understanding how birds are adapted to interact with airflows. Small UAVs have the potential to dramatically change current practices in many areas such as, search and rescue, surveillance, and environmental monitoring. Currently the utility of these systems is limited by their operational endurance and their inability to operate in strong turbulent winds, especially those that often occur in urban environments. Birds are adapted to be able to fly in these conditions and actually use them to their advantage to minimise their energy output.
This project is composed of three tracks which contain elements of technology development, as well as scientific investigation looking at bird flight behaviour and aerodynamics. The first track looks at developing path planning algorithms for UAVs in urban environments based on how birds fly in these areas, by using GPS tracking and computational fluid dynamics alongside trajectory optimization. The second track aims to develop artificial wings with improved gust tolerance inspired by the features of feathered wings. Here, high speed video measurements of birds flying through gusts will be used alongside wind tunnel testing of artificial wings to discover what features of a bird’s wing help to alleviate gusts. The third track develops novel force and flow sensor arrays for autonomous flight control based on the sensor arrays found in flying animals. These arrays will be used to make UAVs with increased agility and robustness. This unique bird inspired approach uses biology to show what is possible, and engineering to find the features that enable this performance and develop them into functional technologies.
Max ERC Funding
1 998 546 €
Duration
Start date: 2016-04-01, End date: 2021-03-31
Project acronym BIO-ORIGAMI
Project Meta-biomaterials: 3D printing meets Origami
Researcher (PI) Amir Abbas Zadpoor
Host Institution (HI) TECHNISCHE UNIVERSITEIT DELFT
Call Details Starting Grant (StG), PE8, ERC-2015-STG
Summary Meta-materials, best known for their extraordinary properties (e.g. negative stiffness), are halfway from both materials and structures: their unusual properties are direct results of their complex 3D structures. This project introduces a new class of meta-materials called meta-biomaterials. Meta-biomaterials go beyond meta-materials by adding an extra dimension to the complex 3D structure, i.e. complex and precisely controlled surface nano-patterns. The 3D structure gives rise to unprecedented or rare combination of mechanical (e.g. stiffness), mass transport (e.g. permeability, diffusivity), and biological (e.g. tissue regeneration rate) properties. Those properties optimize the distribution of mechanical loads and the transport of nutrients and oxygen while providing geometrical shapes preferable for tissue regeneration (e.g. higher curvatures). Surface nano-patterns communicate with (stem) cells, control their differentiation behavior, and enhance tissue regeneration.
There is one important problem: meta-biomaterials cannot be manufactured with current technology. 3D printing can create complex shapes while nanolithography creates complex surface nano-patterns down to a few nanometers but only on flat surfaces. There is, however, no way of combining complex shapes with complex surface nano-patterns. The groundbreaking nature of this project is in solving that deadlock using the Origami concept (the ancient Japanese art of paper folding). In this approach, I first decorate flat 3D-printed sheets with nano-patterns. Then, I apply Origami techniques to fold the decorated flat sheet and create complex 3D shapes. The sheet knows how to self-fold to the desired structure when subjected to compression, owing to pre-designed joints, crease patterns, and thickness/material distributions that control its mechanical instability. I will demonstrate the added value of meta-biomaterials in improving bone tissue regeneration using in vitro cell culture assays and animal models
Summary
Meta-materials, best known for their extraordinary properties (e.g. negative stiffness), are halfway from both materials and structures: their unusual properties are direct results of their complex 3D structures. This project introduces a new class of meta-materials called meta-biomaterials. Meta-biomaterials go beyond meta-materials by adding an extra dimension to the complex 3D structure, i.e. complex and precisely controlled surface nano-patterns. The 3D structure gives rise to unprecedented or rare combination of mechanical (e.g. stiffness), mass transport (e.g. permeability, diffusivity), and biological (e.g. tissue regeneration rate) properties. Those properties optimize the distribution of mechanical loads and the transport of nutrients and oxygen while providing geometrical shapes preferable for tissue regeneration (e.g. higher curvatures). Surface nano-patterns communicate with (stem) cells, control their differentiation behavior, and enhance tissue regeneration.
There is one important problem: meta-biomaterials cannot be manufactured with current technology. 3D printing can create complex shapes while nanolithography creates complex surface nano-patterns down to a few nanometers but only on flat surfaces. There is, however, no way of combining complex shapes with complex surface nano-patterns. The groundbreaking nature of this project is in solving that deadlock using the Origami concept (the ancient Japanese art of paper folding). In this approach, I first decorate flat 3D-printed sheets with nano-patterns. Then, I apply Origami techniques to fold the decorated flat sheet and create complex 3D shapes. The sheet knows how to self-fold to the desired structure when subjected to compression, owing to pre-designed joints, crease patterns, and thickness/material distributions that control its mechanical instability. I will demonstrate the added value of meta-biomaterials in improving bone tissue regeneration using in vitro cell culture assays and animal models
Max ERC Funding
1 499 600 €
Duration
Start date: 2016-02-01, End date: 2021-01-31
Project acronym BioELCell
Project Bioproducts Engineered from Lignocelluloses: from plants and upcycling to next generation materials
Researcher (PI) Orlando Rojas Gaona
Host Institution (HI) AALTO KORKEAKOULUSAATIO SR
Call Details Advanced Grant (AdG), PE8, ERC-2017-ADG
Summary BioELCell will deliver ground-breaking approaches to create next material generation based on renewable resources, mainly cellulose and lignin micro- and nano-particles (MNC, MNL). Our action will disassemble and re-engineer these plant-based polymers into functional materials that will respond to the demands of the bioeconomy of the future, critically important to Europe and the world. My ambitious, high gain research plan is underpinned in the use of multiphase systems with ultra-low interfacial tension to facilitate nanocellulose liberation and atomization of lignin solution streams into spherical particles.
BioELCell will design novel routes to control MNC and MNL reassembly in new 1-D, 2-D and 3-D structures. The systematic methodologies that I propose will address the main challenges for lignocellulose processing and deployment, considering the important effects of interactions with water. This BioELCell action presents a transformative approach by integrating complementary disciplines that will lead to a far-reaching understanding of lignocellulosic biopolymers and solve key challenges in their use, paving the way to functional product development. Results of this project permeates directly or indirectly in the grand challenges for engineering, namely, water use, carbon sequestration, nitrogen cycle, food and advanced materials. Indeed, after addressing the key fundamental elements of the research lines, BioELCell vindicates such effects based on rational use of plant-based materials as a sustainable resource, making possible the generation of new functions and advanced materials.
BioELCell goes far beyond what is known today about cellulose and lignin micro and nano-particles, some of the most promising materials of our century, which are emerging as key elements for the success of a sustainable society.
Summary
BioELCell will deliver ground-breaking approaches to create next material generation based on renewable resources, mainly cellulose and lignin micro- and nano-particles (MNC, MNL). Our action will disassemble and re-engineer these plant-based polymers into functional materials that will respond to the demands of the bioeconomy of the future, critically important to Europe and the world. My ambitious, high gain research plan is underpinned in the use of multiphase systems with ultra-low interfacial tension to facilitate nanocellulose liberation and atomization of lignin solution streams into spherical particles.
BioELCell will design novel routes to control MNC and MNL reassembly in new 1-D, 2-D and 3-D structures. The systematic methodologies that I propose will address the main challenges for lignocellulose processing and deployment, considering the important effects of interactions with water. This BioELCell action presents a transformative approach by integrating complementary disciplines that will lead to a far-reaching understanding of lignocellulosic biopolymers and solve key challenges in their use, paving the way to functional product development. Results of this project permeates directly or indirectly in the grand challenges for engineering, namely, water use, carbon sequestration, nitrogen cycle, food and advanced materials. Indeed, after addressing the key fundamental elements of the research lines, BioELCell vindicates such effects based on rational use of plant-based materials as a sustainable resource, making possible the generation of new functions and advanced materials.
BioELCell goes far beyond what is known today about cellulose and lignin micro and nano-particles, some of the most promising materials of our century, which are emerging as key elements for the success of a sustainable society.
Max ERC Funding
2 486 182 €
Duration
Start date: 2018-08-01, End date: 2023-07-31
