ERC FUNDED PROJECTS

Atmospheric Gas-to-Particle conversion (ATM-GTP) is a 5-year project focusing on one of the most critical atmospheric processes relevant to global climate and air quality: the first steps of atmospheric aerosol particle formation and growth. The project will concentrate on the currently lacking environmentally-specific knowledge about the interacting, non-linear, physical and chemical atmospheric processes associated with nano-scale gas-to-particle conversion (GTP). The main scientific objective of ATM-GTP is to create a deep understanding on atmospheric GTP taking place at the sub-5 nm size range, particularly in heavily-polluted Chinese mega cities like Beijing and in pristine environments like Siberia and Nordic high-latitude regions. We also aim to find out how nano-GTM is associated with air quality-climate interactions and feedbacks. We are interested in quantifying the effect of nano-GTP on the COBACC (Continental Biosphere-Aerosol-Cloud-Climate) feedback loop that is important in Arctic and boreal regions. Our approach enables to point out the effective reduction mechanisms of the secondary air pollution by a factor of 5-10 and to make reliable estimates of the global and regional aerosol loads, including anthropogenic and biogenic contributions to these loads. We can estimate the future role of Northern Hemispheric biosphere in reducing the global radiative forcing via the quantified feedbacks. The project is carried out by the world-leading scientist in atmospheric aerosol science, being also one of the founders of terrestrial ecosystem meteorology, together with his research team. The project uses novel infrastructures including SMEAR (Stations Measuring Ecosystem Atmospheric Relations) stations, related modelling platforms and regional data from Russia and China. The work will be carried out in synergy with several national, Nordic and EU research-innovation projects: Finnish Center of Excellence-ATM, Nordic CoE-CRAICC and EU-FP7-BACCHUS.

2 500 000 €

Start date: 2017-06-01, End date: 2022-05-31

Atmospheric aerosol particles are a major player in the earth system: they impact the climate by scattering and absorbing solar radiation, as well as regulating the properties of clouds. On regional scales aerosol particles are among the main pollutants deteriorating air quality. Capturing the impact of aerosols is one of the main challenges in understanding the driving forces behind changing climate and air quality. Atmospheric aerosol numbers are governed by the ultrafine (< 100 nm in diameter) particles. Most of these particles have been formed from atmospheric vapours, and their fate and impacts are governed by the mass transport processes between the gas and particulate phases. These transport processes are currently poorly understood. Correct representation of the aerosol growth/shrinkage by condensation/evaporation of atmospheric vapours is thus a prerequisite for capturing the evolution and impacts of aerosols. I propose to start a research group that will address the major current unknowns in atmospheric ultrafine particle growth and evaporation. First, we will develop a unified theoretical framework to describe the mass accommodation processes at aerosol surfaces, aiming to resolve the current ambiguity with respect to the uptake of atmospheric vapours by aerosols. Second, we will study the condensational properties of selected organic compounds and their mixtures. Organic compounds are known to contribute significantly to atmospheric aerosol growth, but the properties that govern their condensation, such as saturation vapour pressures and activities, are largely unknown. Third, we aim to resolve the gas and particulate phase processes that govern the growth of realistic atmospheric aerosol. Fourth, we will parameterize ultrafine aerosol growth, implement the parameterizations to chemical transport models, and quantify the impact of these condensation and evaporation processes on global and regional aerosol budgets.

1 498 099 €

Start date: 2011-09-01, End date: 2016-08-31

Key words: Atmospheric secondary organic aerosol, chemical ionization mass spectrometry The increase in anthropogenic atmospheric aerosol since the industrial revolution has considerably mitigated the global warming caused by concurrent anthropogenic greenhouse gas emissions. However, the uncertainty in the magnitude of the aerosol climate influence is larger than that of any other man-made climate-perturbing component. Secondary organic aerosol (SOA) is one of the most prominent aerosol types, yet a detailed mechanistic understanding of its formation process is still lacking. We recently presented the ground-breaking discovery of a new important compound group in our publication in Nature: a prompt and abundant source of extremely low-volatility organic compounds (ELVOC), able to explain the majority of the SOA formed from important atmospheric precursors. Quantifying the atmospheric role of ELVOCs requires further focused studies and I will start a research group with the main task of providing a comprehensive, quantitative and mechanistic understanding of the formation and evolution of SOA. Our recent discovery of an important missing component of SOA highlights the need for comprehensive chemical characterization of both the gas and particle phase composition. This project will use state-of-the-art chemical ionization mass spectrometry (CIMS), which was critical also in the detection of the ELVOCs. We will extend the applicability of CIMS techniques and conduct innovative experiments in both laboratory and field settings using a novel suite of instrumentation to achieve the goals set out in this project. We will provide unprecedented insights into the compounds and mechanisms producing SOA, helping to decrease the uncertainties in assessing the magnitude of aerosol effects on climate. Anthropogenic SOA contributes strongly to air quality deterioration as well and therefore our results will find direct applicability also in this extremely important field.

1 892 221 €

Start date: 2015-03-01, End date: 2020-02-29

Motivated by a series of recent discoveries, DEVOCEAN will provide the first comprehensive evaluation of the emergence of diatoms and their impact on the global biogeochemical cycle of silica, carbon and other nutrients that regulate ocean productivity and ultimately climate. I propose that the proliferation of phytoplankton that occurred after the Permian-Triassic extinction, in particular the diatoms, fundamentally influenced oceanic environments through the enhancement of carbon export to depth as part of the biological pump. Although molecular clocks suggest that diatoms evolved over 200 Ma ago, this result has been largely ignored because of the lack of diatoms in the geologic fossil record with most studies therefore focused on diversification during the Cenozoic where abundant diatom fossils are found. Much of the older fossil evidence has likely been destroyed by dissolution during diagenesis, subducted or is concealed deep within the Earth under many layers of rock. DEVOCEAN will provide evidence on diatom evolution and speciation in the geological record by examining formations representing locations in which diatoms are likely to have accumulated in ocean sediments. We will generate robust estimates of the timing and magnitude of dissolved Si drawdown following the origin of diatoms using the isotopic silicon composition of fossil sponge spicules and radiolarians. The project will also provide fundamental new insights into the timing of dissolved Si drawdown and other key events, which reorganized the distribution of carbon and nutrients in seawater, changing energy flows and productivity in the biological communities of the ancient oceans.

2 500 000 €

Start date: 2019-10-01, End date: 2024-09-30

As the population ages, neurodegenerative diseases (ND) will have a devastating impact on individuals and society. Despite enormous research efforts there is still no cure for these diseases, only care! The origin of ND is hugely complex, spanning from the molecular level to systemic processes, causing malfunctioning of signalling in the central nervous system (CNS). This signalling includes the coupled processing of biochemical and electrical signals, however current approaches for symptomatic- and disease modifying treatments are all based on biochemical approaches, alone. Organic bioelectronics has arisen as a promising technology providing signal translation, as sensors and modulators, across the biology-technology interface; especially, it has proven unique in neuronal applications. There is great opportunity with organic bioelectronics since it can complement biochemical pharmacology to enable a twinned electric-biochemical therapy for ND and neurological disorders. However, this technology is traditionally manufactured on stand-alone substrates. Even though organic bioelectronics has been manufactured on flexible and soft carriers in the past, current technology consume space and volume, that when applied to CNS, rule out close proximity and amalgamation between the bioelectronics technology and CNS components – features that are needed in order to reach high therapeutic efficacy. e-NeuroPharma includes development of innovative organic bioelectronics, that can be in-vivo-manufactured within the brain. The overall aim is to evaluate and develop electrodes, delivery devices and sensors that enable a twinned biochemical-electric therapy approach to combat ND and other neurological disorders. e-NeuroPharma will focus on the development of materials that can cross the blood-brain-barrier, that self-organize and -polymerize along CNS components, and that record and regulate relevant electrical, electrochemical and physical parameters relevant to ND and disorders

3 237 335 €

Start date: 2019-09-01, End date: 2024-08-31

Forests slow global climate change by absorbing atmospheric carbon dioxide but this ecosystem service is limited by soil nutrients. Herbivores potentially alter soil nutrients in a range of ways, but these have mostly only been recorded for large mammals. By comparison, the impacts of the abundant invertebrates in forests have largely been ignored and are not included in current models used to generate the climate predictions so vital for designing governmental policies The proposed project will use a pioneering new interdisciplinary approach to provide the most complete picture yet available of the rates, underlying drivers and ultimate impacts of key nutrient inputs from invertebrate herbivores across forest ecosystems worldwide. Specifically, we will: (1) Establish a network of herbivory monitoring stations across all major forest types, and across key environmental gradients (temperature, rainfall, ecosystem development). (2) Perform laboratory experiments to examine the effects of herbivore excreta on soil processes under different temperature and moisture conditions. (3) Integrate this information into a cutting-edge ecosystem model, to generate more accurate predictions of forest carbon sequestration under future climate change. The network established will form the foundation for a unique long-term global monitoring effort which we intend to continue long after the current funding time scale. This work represents a powerful blend of several disciplines harnessing an array of cutting edge tools to provide fundamentally novel insights into an area of direct and urgent importance for the society.

1 750 000 €

Start date: 2016-03-01, End date: 2021-02-28

I aim to achieve a fundamental understanding of the atomistic kinetic pathways responsible for nanostructure formation and to explore the concept of self-organization by thermodynamic segregation in functional ceramics. Model systems are advanced ceramic thin films, which will be studied under two defining cases: 1) deposition of supersaturated solid solutions or nanocomposites by magnetron sputtering (epitaxy) and arc evaporation. 2) post-deposition annealing (ageing) of as-synthesized material. Thin film ceramics are terra incognita for compositions in the miscibility gap. The field is exciting since both surface and in-depth decomposition can take place in the alloys. The methodology is based on combined growth experiments, characterization, and ab initio calculations to identify and describe systems with a large miscibility gap. A hot topic is to elucidate the bonding nature of the cubic-SiNx interfacial phase, discovered by us in TiN/Si3N4 with impact for superhard nanocomposites. I have also pioneered studies of self-organization by spinodal decomposition in TiAlN alloy films (age hardening). Here, the details of metastable c-AlN nm domain formation are unknown and the systems HfAlN and ZrAlN are predicted to be even more promising. Other model systems are III-nitrides (band gap engineering), semiconductor/insulator oxides (interface conductivity) and carbides (tribology). The proposed research is exploratory and has the potential of explaining outstanding phenomena (Gibbs-Thomson effect, strain, and spinodal decomposition) as well as discovering new phases, for which my group has a track-record, backed-up by state-of-the-art in situ techniques. One can envision a new class of super-hard all-crystalline ceramic nanocomposites with relevance for a large number of research areas where elevated temperature is of concern, significant in impact for areas as diverse as microelectronics and cutting tools as well as mechanical and optical components.

2 292 000 €

Start date: 2008-12-01, End date: 2013-11-30

Computer vision concerns itself with understanding the real world through the analysis of images. Typical problems are object recognition, medical image segmentation, geometric reconstruction problems and navigation of autonomous vehicles. Such problems often lead to complicated optimization problems with a mixture of discrete and continuous variables, or even infinite dimensional variables in terms of curves and surfaces. Today, state-of-the-art in solving these problems generally relies on heuristic methods that generate only local optima of various qualities. During the last few years, work by the applicant, co-workers, and others has opened new possibilities. This research project builds on this. We will in this project focus on developing new global optimization methods for computing high-quality solutions for a broad class of problems. A guiding principle will be to relax the original, complicated problem to an approximate, simpler one to which globally optimal solutions can more easily be computed. Technically, this relaxed problem often is convex. A crucial point in this approach is to estimate the quality of the exact solution of the approximate problem compared to the (unknown) global optimum of the original problem. Preliminary results have been well received by the research community and we now wish to extend this work to more difficult and more general problem settings, resulting in thorough re-examination of algorithms used widely in different and trans-disciplinary fields. This project is to be considered as a basic research project with relevance to industry. The expected outcome is new knowledge spread to a wide community through scientific papers published at international journals and conferences as well as publicly available software.

1 440 000 €

Start date: 2008-07-01, End date: 2013-06-30

One of the greatest recent advances in climate science is that it is now beyond reasonable doubt that human activity is warming the Earth. The next natural question is by how much the Earth will warm for a given emission – a quantity that will be essential to regulating global warming. Yet, the likely range of 1.5-4.5 K for equilibrium climate sensitivity (ECS) for a doubling of the atmospheric CO2 concentration has not been reduced for decades. In particular the risk of ECS being high is concerning, but also represents a scientifically intriguing challenge. In this project I will conduct unconventional and innovative research designed to limit the upper bound of ECS: I will confront leading hypotheses of extreme cloud feedbacks – the primary potential source of a high ECS – with observations from the full instrumental- and satellite records, and proxies from warm- and cold past climates. I will investigate how ocean- and atmospheric circulations impact cloud feedbacks, and seek the limits for how much past greenhouse warming could have been masked by aerosol cooling. The highECS project builds on my developments of climate modeling, diagnostics and statistical methods, the strengths of the host institution and developments in national and international projects. The effort is timely in that the World Climate Research Programme (WCRP) has identified uncertainty in ECS as one of the grand challenges of climate science, while the capacity to observe ongoing climate change, key cloud processes, extracting new proxy evidence of past change and computing power is greater than ever before. If successful in my objective of reining in the upper bound on climate sensitivity this will be a major breakthrough upon a nearly 40-year scientific deadlock and reduce the risk of catastrophic climate change – if not, it will indicate that extreme policy measures may be needed to curb future global warming. Either way, the economic value of knowing is tremendous.

1 998 654 €

Start date: 2018-09-01, End date: 2023-08-31

The vast boreal forests play a critical role in the carbon cycle. As a consequence of increasing temperature and atmospheric CO2, forest growth and subsequently carbon sequestration may be strongly affected. It is thus crucial to understand and predict the consequences of climate change on these ecosystems. Stable isotope analysis of tree rings represents a versatile archive where the effects of environmental changes are recorded. The main goal of the project is to obtain a better understanding of δ13C and δ18O in tree rings that can be used to infer the response of forests to climate change. The goal is achieved by a detailed analysis of the incorporation and fractionation of isotopes in trees using four novel methods: (1) We will measure compound-specific δ13C and δ18O of leaf sugars and (2) combine these with intra-annual δ13C and δ18O analysis of tree rings. The approaches are enabled by methodological developments made by me and ISOBOREAL collaborators (Rinne et al. 2012, Lehmann et al. 2016, Loader et al. in prep.). Our aim is to determine δ13C and δ18O dynamics of individual sugars in response to climatic and physiological factors, and to define how these signals are altered before being stored in tree rings. The improved mechanistic understanding will be applied on tree ring isotope chronologies to infer the response of the studied forests to climate change. (3) The fact that δ18O in tree rings is a mixture of source and leaf water signals is a major problem for its application on climate studies. To solve this we aim to separate the two signals using position-specific δ18O analysis on tree ring cellulose for the first time, which we will achieve by developing novel methods. (4) We will for the first time link the climate signal both in leaf sugars and annual rings with measured ecosystem exchange of greenhouse gases CO2 and H2O using eddy-covariance techniques.

1 814 610 €

Start date: 2018-01-01, End date: 2022-12-31

Atmospheric concentration of the strong greenhouse gas methane (CH4) is rising with an increased annual growth rate. Biosphere has an important role in the global CH4 budget, but high uncertainties remain in the strength of its different sink and source components. Among the natural sources, the contribution of vegetation to the global CH4 budget is the least well understood. Role of trees to the CH4 budget of forest ecosystems has long been overlooked due to the perception that trees do not play a role in the CH4 dynamics. Methanogenic Archaea were long considered as the sole CH4 producing organisms, while new findings of aerobic CH4 production in terrestrial vegetation and in fungi show our incomplete understanding of the CH4 cycling processes. Enclosure measurements from trees reveal that trees can emit CH4 and may substantially contribute to the net CH4 exchange of forests. The main aim of MEMETRE project is to raise the process-based understanding of CH4 exchange in boreal and temperate forests to the level where we can construct a sound process model for the soil-tree-atmosphere CH4 exchange. We will achieve this by novel laboratory and field experiment focusing on newly identified processes, quantifying CH4 fluxes, seasonal and daily variability and drivers of CH4 at leaf-level, tree and ecosystem level. We use novel CH4 flux measurement techniques to identify the roles of fungal and methanogenic production and transport mechanisms to the CH4 emission from trees, and we synthesize the experimental work to build a process model including CH4 exchange processes within trees and the soil, transport of CH4 between the soil and the trees, and transport of CH4 within the trees. The project will revolutionize our understanding of CH4 flux dynamics in forest ecosystems. It will significantly narrow down the high uncertainties in boreal and temperate forests for their contribution to the global CH4 budget.

1 908 652 €

Start date: 2018-02-01, End date: 2023-01-31

Energy efficiency and sustainability encourage to develop lightweight materials with excellent mechanical properties, combining also additional functionalities and responses. Therein nature allows inspiration, as e.g. pearl of nacre and silk show extraordinary mechanical properties due to their aligned self-assemblies. However, biological complexity poses great challenges and in biomimetics selected features are mimicked using simpler concepts. Previously artificial nacre has been mimicked by multilayer and sequential techniques and ice-templating. However, concepts for aligned spontaneous self-assemblies are called for scalability. We will develop toughened nacre-inspired materials by templating functionalized polymers on colloidal sheets in suspension, followed by self-assembly by solvent removal. Similarly, we will develop silk-mimetic materials using aligned organic fibrous reinforcements in soft dissipative matrix. Nanofibrillated cellulose will be wet-spun using extrusion into coagulant bath, followed by post drawing, drying and functionalization to allow silk-like fibers with high mechanical properties. In another route, cellulose rod-like whiskers will be decorated with soft functional polymers allowing energy dissipation, followed by alignment and interlinking to mimick silk-assemblies. The colloidal routes allow also new functionalities by using functional polymers, e.g. electroactive and conjugated polymers and nanoparticles. Importantly, redox-active polymers are bound on the colloidal sheets. Incorporating in a planar electrochemical cell with flexible electrodes, electrochemical switching of stiffness is obtained using a small voltage, as the intercolloidal interaction is controlled by the charge state of the redox-active layers. This would allow a new class of material, eg. to interface users and devices. In summary, we present a colloidal self-assembly platform for biomimetic materials with exciting mechanical, functional, and switching properties.

2 296 320 €

Start date: 2012-04-01, End date: 2017-03-31

Cancer is responsible for 20% of all deaths in Europe. Current cancer research is based on cell ensemble measurements or on snapshot studies of individual cells. However, cancer is a systemic disease, involving many cells that interact and evolve over time in a complex manner, which cell ensemble studies and snapshot studies cannot grasp. It is therefore crucial to investigate cancer at the single cell level and in longitudinal studies (over time). Despite the recent developments in micro- and nanotechnologies, combined with live cell imaging, today, there is no method available that meets the crucial need for global monitoring of individual cell responses to stimuli/perturbation in real-time. This project addresses this crucial need by combining super resolution live-cell imaging and the development of sensors, as well as injection devices based on vertical nanowire arrays. The devices will penetrate multiple single cells in a fully controlled manner, with minimal invasiveness. The objectives of the project are: 1) To develop nanowire based-tools in order to gain controlled and reliable access to the cell interior with minimal invasiveness. 2) Developing mRNA sensing and biomolecule injection capabilities based on nanowires. 3) Performing longitudinal single cell studies in tumours, including monitoring gene expression in real time, under controlled cell perturbation. By enabling global, long term monitoring of individual tumour cells submitted to controlled stimuli, the project will open up new horizons in Biology and in Medical Research. It will enable ground-breaking discoveries in understanding the complexity of molecular events underlying the disease. This cross-disciplinary project will lead to paradigm-shifting research, which will enable the development of optimal treatment strategies. This will be applicable, not only for cancer, but also for a broad range of diseases, such as diabetes and neurodegenerative diseases.

2 621 251 €

Start date: 2016-09-01, End date: 2021-08-31

Semiconductor nanowires composed of III-V materials have enormous potential to add new functionality to electronics and optical applications. However, integration of these promising structures into applications is severely limited by the current near-universal reliance on gold nanoparticles as seeds for nanowire fabrication. Although highly controlled fabrication is achieved, this metal is entirely incompatible with the Si-based electronics industry. It also presents limitations for the extension of nanowire research towards novel materials not existing in bulk. To date, exploration of alternatives has been limited to selective-area and self-seeded processes, both of which have major limitations in terms of size and morphology control, potential to combine materials, and crystal structure tuning. There is also very little understanding of precisely why gold has proven so successful for nanowire growth, and which alternatives may yield comparable or better results. The aim of this project will be to explore alternative nanoparticle seed materials to go beyond the use of gold in III-V nanowire fabrication. This will be achieved using a unique and recently developed capability for aerosol-phase fabrication of highly controlled nanoparticles directly integrated with conventional nanowire fabrication equipment. The primary goal will be to deepen the understanding of the nanowire fabrication process, and the specific advantages (and limitations) of gold as a seed material, in order to develop and optimize alternatives. The use of a wide variety of seed particle materials in nanowire fabrication will greatly broaden the variety of novel structures that can be fabricated. The results will also transform the nanowire fabrication research field, in order to develop important connections between nanowire research and the semiconductor industry, and to greatly improve the viability of nanowire integration into future devices.

1 496 246 €

Start date: 2013-09-01, End date: 2018-08-31

Oxidation reactions are of fundamental importance in Nature and are key transformation in organic synthesis. There is currently a need from society to replace waste-producing expensive oxidants by environmentally benign oxidants in industrial oxidation reactions. The aim with the proposed research is to develop novel green oxidation methodology that also involves hydrogen transfer reactions. In the oxidation reactions the goal is to use molecular oxygen (air) or hydrogen peroxide as the oxidants. In the present project new catalytic oxidations via low-energy electron transfer will be developed. The catalytic reactions obtained can be used for racemization of alcohols and amines and for oxygen- and hydrogen peroxide-driven oxidations of various substrates. Examples of some reactions that will be studied are oxidative palladium-catalyzed C-C bond formation and metal-catalyzed C-H oxidation including dehydrogenation reactions with iron and ruthenium. Coupled catalytic systems where electron transfer mediators (ETMs) facilitate electron transfer from the reduced catalyst to molecular oxygen (hydrogen peroxide) will be studied. Highly efficient reoxidation systems will be designed by covalently linking two electron transfer mediators (ETMs). The intramolecular electron transfer in these hybrid ETM catalysts will significantly increase the rate of oxidation reactions. The research will lead to development of more efficient reoxidation systems based on molecular oxygen and hydrogen peroxide, as well as more versatile racemization catalysts for alcohols and amines.

1 722 000 €

Start date: 2010-01-01, End date: 2015-12-31

The objective of the project is to find new methods for quality evaluation and modeling of room acoustics. Room acoustics has been studied over 100 years, but, e.g., the relation between objective attributes and subjective measures is not fully understood yet. This project will develop novel methods to simulate and auralize sound propagation in rooms, in particular in concert halls. The research is divided into three main topics. First, authentic auralization with physically-based room acoustics modeling methods will be studied. The recently introduced acoustic radiance transfer method is developed further to handle complex reflections from surfaces as well as diffraction. The second research topic is quality evaluation of concert hall acoustics. Novel algorithms will be developed for spatial sound analysis of a large impulse response database. Live recordings will be analyzed to find new objective quality measures. Quality assessments will also be performed subjectively with sensory evaluation methods borrowed from food industry. The third topic is related to augmented reality audio technology, which reveals the potential and richness of emerging technologies, giving a scenario of the possible future personalized mobile audio communications. The results of the project will be widely applicable in the academia, but also in every day life of people all over the world. The new knowledge in room acoustics will help to build acoustically better concert halls and public places such as libraries, shopping malls, etc. The augmented reality audio applications will help and enrich communication between humans. The concert hall acoustics research has great potential to find novel objective and subjective quality metrics. They also help in creation of authentic auralization, which will be one of the main tools for consultants in design, and in particular when explaining design results to architects, clients, and public audience.

880 224 €

Start date: 2008-07-01, End date: 2013-06-30

Light-emitting diodes (LEDs), which emit light by a solid-state process called electroluminescence, are considered as the most promising energy-efficient technology for future lighting and display. It has been demonstrated that optimal use of LEDs could significantly reduce the world’s electricity use for lighting from 20% to 4%. However, current LED technologies typically rely on expensive high-vacuum manufacturing processes, hampering their widespread applications. Therefore, it is highly desirable to develop low-cost LEDs based on solution-processed semiconductors. A superstar in the family of solution-processed semiconductors is metal halide perovskites, which have shown great success in photovoltaic applications during the past few years. The same perovskites can also been applied in LEDs. Despite being at an early stage of development with associated challenges, metal halide perovskites provide great promise as a new generation of materials for low-cost LEDs. This project aims to develop high-efficiency and stable perovskite LEDs based on solution-processed perovskites. Two different classes of low-dimensional perovskites will be investigated independently. These new perovskites materials will then be coupled with novel interface engineering to fabricate perovskite LEDs with the performance beyond the state of the art. At the core of the research is the synthesis of new perovskite nanostructures, combined with advanced spectroscopic characterization and device development. This project combines recent advances in perovskite optoelectronics and low-dimensional materials to create a new paradigm for perovskite LEDs. This research will also lead to the development of new perovskites materials which will serve future advances in photovoltaics, transistors, lasers, etc.

1 499 759 €

Start date: 2017-03-01, End date: 2022-02-28

This project is aimed at accelerating the synthesis of important organic molecules through key enabling technologies towards automatized catalysis and single-carbon insertion reactions. Transferring the simplest carbon units to organic molecules has the potential to change the way we approach synthesis planning through new asymmetric skeletal homologations and rearrangements of simple raw materials, for which only long workarounds exist now. These methods can reduce to half the manipulations required to access relevant medicines, organocatalysts, ligands, bio-molecular tools and photovoltaic devices. They target unreactive functions to introduce fundamental one-carbon units (CO or C) that are present in virtually any organic compound. New powerful reagents that resemble these basic single-carbon units in excited electronic configurations are to be developed for this purpose. The new catalytic methods needed are based on the solid grounds of carbene-transfer reactions and the recent advances of my group in the development of new homogeneous catalysts. Moreover, a new catalyst platform will be developed to complement our existing portfolio for success in the challenging processes targeted in this proposal. We aim to pioneer a fully automatized workflow for research in catalysis that devoid the synthesis of organic ligands replacing them by combinatorial assemblies built in situ from un-structured simple molecules. The new reactions arising from these new catalysts and reagents will expedite the valorization of raw materials (such as carbonyls, olefins and hydrocarbons) into important chiral molecules in a single transformation. This bold aim is a priority of the European Commission for the coming years as it will save time, protect the environment and reduce cost at once. Thus, these innovative technologies have the potential of transforming the research workflow in homogeneous catalysis and the logics of retrosynthesis of organic molecules at a fundamental level.

1 487 245 €

Start date: 2017-04-01, End date: 2022-03-31

We are changing the composition of Earth’s atmosphere, with profound consequences for the environment and our wellbeing. Tiny aerosol particles are globally responsible for much of the health effects and mortality related to air pollution and play key roles in regulating Earth’s climate via their critical influence on both radiation balance and cloud formation. Every single cloud droplet has been nucleated on the surface of an aerosol particle. Aerosols and droplets provide the media for condensed-phase chemistry in the atmosphere, but large gaps remain in our understanding of their formation, transformations, and climate interactions. Surface properties may play crucial roles in these processes, but currently next to nothing is known about the surfaces of atmospheric aerosols and cloud droplets and their impacts are almost entirely unconstrained. My recent work strongly suggests that such surfaces are significantly different from their associated bulk material and that these unique properties can impact aerosol processes all the way to the global scale. Very few surface-specific properties are currently considered when evaluating aerosol effects on atmospheric chemistry and global climate. Novel developments of cutting-edge computational and experimental methods, in particular synchrotron-based photoelectron spectroscopy, now for the first time makes direct molecular-level characterizations of atmospheric surfaces feasible. This project will demonstrate and quantify potential surface impacts in the atmosphere, by first directly characterizing realistic atmospheric surfaces, and then trace fingerprints of specific surface properties in a hierarchy of experimental and modelled aerosol processes and atmospheric effects. Successful demonstrations of unique aerosol surface fingerprints will constitute truly novel insights into a currently uncharted area of the atmospheric system and identify an entirely new frontier in aerosol research and atmospheric science.

1 499 626 €

Start date: 2017-03-01, End date: 2022-02-28