Project acronym 3D-JOINT
Project 3D Bioprinting of JOINT Replacements
Researcher (PI) Johannes Jos Malda
Host Institution (HI) UNIVERSITAIR MEDISCH CENTRUM UTRECHT
Call Details Consolidator Grant (CoG), LS7, ERC-2014-CoG
Summary The world has a significant medical challenge in repairing injured or diseased joints. Joint degeneration and its related pain is a major socio-economic burden that will increase over the next decade and is currently addressed by implanting a metal prosthesis. For the long term, the ideal solution to joint injury is to successfully regenerate rather than replace the damaged cartilage with synthetic implants. Recent advances in key technologies are now bringing this “holy grail” within reach; regenerative approaches, based on cell therapy, are already clinically available albeit only for smaller focal cartilage defects.
One of these key technologies is three-dimensional (3D) bio-printing, which provides a greatly controlled placement and organization of living constructs through the layer-by-layer deposition of materials and cells. These tissue constructs can be applied as tissue models for research and screening. However, the lack of biomechanical properties of these tissue constructs has hampered their application to the regeneration of damaged, degenerated or diseased tissue.
Having established a cartilage-focussed research laboratory in the University Medical Center Utrecht, I have addressed this biomechanical limitation of hydrogels through the use of hydrogel composites. Specifically, I have pioneered a 3D bio-printing technology that combines accurately printed small diameter thermoplast filaments with cell invasive hydrogels to form strong fibre-reinforced constructs. This, in combination with bioreactor technology, is the key to the generation of larger, complex tissue constructs with cartilage-like biomechanical resilience. With 3D-JOINT I will use my in-depth bio-printing and bioreactor knowledge and experience to develop a multi-phasic 3D-printed biological replacement of the joint.
Summary
The world has a significant medical challenge in repairing injured or diseased joints. Joint degeneration and its related pain is a major socio-economic burden that will increase over the next decade and is currently addressed by implanting a metal prosthesis. For the long term, the ideal solution to joint injury is to successfully regenerate rather than replace the damaged cartilage with synthetic implants. Recent advances in key technologies are now bringing this “holy grail” within reach; regenerative approaches, based on cell therapy, are already clinically available albeit only for smaller focal cartilage defects.
One of these key technologies is three-dimensional (3D) bio-printing, which provides a greatly controlled placement and organization of living constructs through the layer-by-layer deposition of materials and cells. These tissue constructs can be applied as tissue models for research and screening. However, the lack of biomechanical properties of these tissue constructs has hampered their application to the regeneration of damaged, degenerated or diseased tissue.
Having established a cartilage-focussed research laboratory in the University Medical Center Utrecht, I have addressed this biomechanical limitation of hydrogels through the use of hydrogel composites. Specifically, I have pioneered a 3D bio-printing technology that combines accurately printed small diameter thermoplast filaments with cell invasive hydrogels to form strong fibre-reinforced constructs. This, in combination with bioreactor technology, is the key to the generation of larger, complex tissue constructs with cartilage-like biomechanical resilience. With 3D-JOINT I will use my in-depth bio-printing and bioreactor knowledge and experience to develop a multi-phasic 3D-printed biological replacement of the joint.
Max ERC Funding
1 998 871 €
Duration
Start date: 2015-07-01, End date: 2020-06-30
Project acronym A-DIET
Project Metabolomics based biomarkers of dietary intake- new tools for nutrition research
Researcher (PI) Lorraine Brennan
Host Institution (HI) UNIVERSITY COLLEGE DUBLIN, NATIONAL UNIVERSITY OF IRELAND, DUBLIN
Call Details Consolidator Grant (CoG), LS7, ERC-2014-CoG
Summary In todays advanced technological world, we can track the exact movement of individuals, analyse their genetic makeup and predict predisposition to certain diseases. However, we are unable to accurately assess an individual’s dietary intake. This is without a doubt one of the main stumbling blocks in assessing the link between diet and disease/health. The present proposal (A-DIET) will address this issue with the overarching objective to develop novel strategies for assessment of dietary intake.
Using approaches to (1) identify biomarkers of specific foods (2) classify people into dietary patterns (nutritypes) and (3) develop a tool for integration of dietary and biomarker data, A-DIET has the potential to dramatically enhance our ability to accurately assess dietary intake. The ultimate output from A-DIET will be a dietary assessment tool which can be used to obtain an accurate assessment of dietary intake by combining dietary and biomarker data which in turn will allow investigations into relationships between diet, health and disease. New biomarkers of specific foods will be identified and validated using intervention studies and metabolomic analyses. Methods will be developed to classify individuals into dietary patterns based on biomarker/metabolomic profiles thus demonstrating the novel concept of nutritypes. Strategies for integration of dietary and biomarker data will be developed and translated into a tool that will be made available to the wider scientific community.
Advances made in A-DIET will enable nutrition epidemiologist’s to properly examine the relationship between diet and disease and develop clear public health messages with regard to diet and health. Additionally results from A-DIET will allow researchers to accurately assess people’s diet and implement health promotion strategies and enable dieticians in a clinical environment to assess compliance to therapeutic diets such as adherence to a high fibre diet or a gluten free diet.
Summary
In todays advanced technological world, we can track the exact movement of individuals, analyse their genetic makeup and predict predisposition to certain diseases. However, we are unable to accurately assess an individual’s dietary intake. This is without a doubt one of the main stumbling blocks in assessing the link between diet and disease/health. The present proposal (A-DIET) will address this issue with the overarching objective to develop novel strategies for assessment of dietary intake.
Using approaches to (1) identify biomarkers of specific foods (2) classify people into dietary patterns (nutritypes) and (3) develop a tool for integration of dietary and biomarker data, A-DIET has the potential to dramatically enhance our ability to accurately assess dietary intake. The ultimate output from A-DIET will be a dietary assessment tool which can be used to obtain an accurate assessment of dietary intake by combining dietary and biomarker data which in turn will allow investigations into relationships between diet, health and disease. New biomarkers of specific foods will be identified and validated using intervention studies and metabolomic analyses. Methods will be developed to classify individuals into dietary patterns based on biomarker/metabolomic profiles thus demonstrating the novel concept of nutritypes. Strategies for integration of dietary and biomarker data will be developed and translated into a tool that will be made available to the wider scientific community.
Advances made in A-DIET will enable nutrition epidemiologist’s to properly examine the relationship between diet and disease and develop clear public health messages with regard to diet and health. Additionally results from A-DIET will allow researchers to accurately assess people’s diet and implement health promotion strategies and enable dieticians in a clinical environment to assess compliance to therapeutic diets such as adherence to a high fibre diet or a gluten free diet.
Max ERC Funding
1 995 548 €
Duration
Start date: 2015-08-01, End date: 2020-07-31
Project acronym ARTECHNE
Project Technique in the Arts. Concepts, Practices, Expertise (1500-1950)
Researcher (PI) Sven Georges Mathieu Dupré
Host Institution (HI) UNIVERSITEIT UTRECHT
Call Details Consolidator Grant (CoG), SH5, ERC-2014-CoG
Summary The transmission of ‘technique’ in art has been a conspicuous ‘black box’ resisting analysis. The tools of the humanities used to study the transmission of ideas and concepts are insufficient when it comes to understanding the transmission of something as non-propositional and non-verbal as ‘technique’. The insights of the neurosciences in, for example, the acquisition and transmission of drawing skills are not yet sufficiently advanced to be historically restrictive. However, only in the most recent years, the history of science and technology has turned to how-to instructions as given in recipes. This project proposes to undertake the experimental reconstruction of historical recipes to finally open the black box of the transmission of technique in the visual and decorative arts. Considering ‘technique’ as a textual, material and social practice, this project will write a long-term history of the theory and practice of the study of ‘technique’ in the visual and decorative arts between 1500 and 1950. The three central research questions here are: (1) what is technique in the visual and decorative arts, (2) how is technique transmitted and studied, and (3) who is considered expert in technique, and why? This project will make a breakthrough in our understanding of the transmission of technique in the arts by integrating methodologies typical for the humanities and historical disciplines with laboratory work. Also, by providing a history of technique in the arts, this project lays the historical foundations of the epistemologies of conservation, restoration and technical art history precisely at a moment of greatest urgency. The connection between the history of science and technology and the expertise in conservation, restoration and technical art history (in the Ateliergebouw in Amsterdam) this project envisions builds the intellectual infrastructure of a new field of interdisciplinary research, unique in Europe.
Summary
The transmission of ‘technique’ in art has been a conspicuous ‘black box’ resisting analysis. The tools of the humanities used to study the transmission of ideas and concepts are insufficient when it comes to understanding the transmission of something as non-propositional and non-verbal as ‘technique’. The insights of the neurosciences in, for example, the acquisition and transmission of drawing skills are not yet sufficiently advanced to be historically restrictive. However, only in the most recent years, the history of science and technology has turned to how-to instructions as given in recipes. This project proposes to undertake the experimental reconstruction of historical recipes to finally open the black box of the transmission of technique in the visual and decorative arts. Considering ‘technique’ as a textual, material and social practice, this project will write a long-term history of the theory and practice of the study of ‘technique’ in the visual and decorative arts between 1500 and 1950. The three central research questions here are: (1) what is technique in the visual and decorative arts, (2) how is technique transmitted and studied, and (3) who is considered expert in technique, and why? This project will make a breakthrough in our understanding of the transmission of technique in the arts by integrating methodologies typical for the humanities and historical disciplines with laboratory work. Also, by providing a history of technique in the arts, this project lays the historical foundations of the epistemologies of conservation, restoration and technical art history precisely at a moment of greatest urgency. The connection between the history of science and technology and the expertise in conservation, restoration and technical art history (in the Ateliergebouw in Amsterdam) this project envisions builds the intellectual infrastructure of a new field of interdisciplinary research, unique in Europe.
Max ERC Funding
1 907 944 €
Duration
Start date: 2015-09-01, End date: 2020-08-31
Project acronym ARTimmune
Project Programmable ARTificial immune systems to fight cancer
Researcher (PI) Carl FIGDOR
Host Institution (HI) STICHTING KATHOLIEKE UNIVERSITEIT
Call Details Advanced Grant (AdG), LS7, ERC-2018-ADG
Summary Immunotherapy has entered centre stage as a novel treatment modality for cancer. Notwithstanding this major step forward, toxicity and immunosuppression remain major obstacles, and illustrate the pressing need for more powerful and specific immunotherapies against cancer. To overcome these roadblocks, in ARTimmune, I propose to follow a radically different approach by developing local rather than systemic immunotherapies. Taking advantage of the architecture of a lymph node (LN), I aim to design fully synthetic immune niches to locally instruct immune cell function. I hypothesize that programmable synthetic immune niches, when injected next to a tumour, will act as local powerhouses to generate bursts of cytotoxic T cells for tumour destruction, without toxic side effects. Single cell transcriptomics on LN, obtained from patients that are vaccinated against cancer, will provide unique insight in communication within immune cell clusters and provide a blueprint for the intelligent design of synthetic immune niches. Chemical tools will be used to build branched polymeric structures decorated with immunomodulating molecules to mimic LN architecture. These will be injected, mixed with sponge-like scaffolds to provide porosity needed for immune cell infiltration. Programming of immune cell function will be accomplished by in vivo targeting- and proteolytic activation- of immunomodulators for fine-tuning, and to extend the life span of these local powerhouses. The innovative character of ARTimmune comes from: 1) novel fundamental immunological insight in complex communication within LN cell clusters, 2) a revolutionary new approach in immunotherapy, by the development of 3) injectable- and 4) programmable- synthetic immune niches by state-of-the-art chemical technology. When successful, it will revolutionize cancer immunotherapy, moving from maximal tolerable dose systemic treatment with significant toxicity to local low dose treatment in the direct vicinity of a tumour
Summary
Immunotherapy has entered centre stage as a novel treatment modality for cancer. Notwithstanding this major step forward, toxicity and immunosuppression remain major obstacles, and illustrate the pressing need for more powerful and specific immunotherapies against cancer. To overcome these roadblocks, in ARTimmune, I propose to follow a radically different approach by developing local rather than systemic immunotherapies. Taking advantage of the architecture of a lymph node (LN), I aim to design fully synthetic immune niches to locally instruct immune cell function. I hypothesize that programmable synthetic immune niches, when injected next to a tumour, will act as local powerhouses to generate bursts of cytotoxic T cells for tumour destruction, without toxic side effects. Single cell transcriptomics on LN, obtained from patients that are vaccinated against cancer, will provide unique insight in communication within immune cell clusters and provide a blueprint for the intelligent design of synthetic immune niches. Chemical tools will be used to build branched polymeric structures decorated with immunomodulating molecules to mimic LN architecture. These will be injected, mixed with sponge-like scaffolds to provide porosity needed for immune cell infiltration. Programming of immune cell function will be accomplished by in vivo targeting- and proteolytic activation- of immunomodulators for fine-tuning, and to extend the life span of these local powerhouses. The innovative character of ARTimmune comes from: 1) novel fundamental immunological insight in complex communication within LN cell clusters, 2) a revolutionary new approach in immunotherapy, by the development of 3) injectable- and 4) programmable- synthetic immune niches by state-of-the-art chemical technology. When successful, it will revolutionize cancer immunotherapy, moving from maximal tolerable dose systemic treatment with significant toxicity to local low dose treatment in the direct vicinity of a tumour
Max ERC Funding
2 500 000 €
Duration
Start date: 2019-11-01, End date: 2024-10-31
Project acronym AUTOCOMPLEMENT
Project The role of complement in the induction of autoimmunity against post-translationally modified proteins
Researcher (PI) Leendert TROUW
Host Institution (HI) ACADEMISCH ZIEKENHUIS LEIDEN
Call Details Consolidator Grant (CoG), LS7, ERC-2016-COG
Summary In many prevalent autoimmune diseases such as rheumatoid arthritis (RA) and systemic lupus erythematosus (SLE) autoantibodies are used as diagnostic and prognostic tools. Several of these autoantibodies target proteins that have been post-translationally modified (PTM). Examples of such modifications are citrullination and carbamylation. The success of B cell-targeted therapies in many auto-antibody positive diseases suggests that B cell mediated auto-immunity is playing a direct pathogenic role. Despite the wealth of information on the clinical associations of these anti-PTM protein antibodies as biomarkers we have currently no insight into why these antibodies are formed.
Immunization studies reveal that PTM proteins can induce antibody responses even in the absence of exogenous adjuvant. The reason why these PTM proteins have ‘autoadjuvant’ properties that lead to a breach of tolerance is currently unknown. In this proposal, I hypothesise that the breach of tolerance towards PTM proteins is mediated by complement factors that bind directly to these PTM. Our preliminary data indeed reveal that several complement factors bind specifically to PTM proteins. Complement could be involved in the autoadjuvant property of PTM proteins as next to killing pathogens complement can also boost adaptive immune responses. I plan to unravel the importance of the complement–PTM protein interaction by answering these questions:
1) What is the physiological function of complement binding to PTM proteins?
2) Is the breach of tolerance towards PTM proteins influenced by complement?
3) Can the adjuvant function of PTM be used to increase vaccine efficacy and/or decrease autoreactivity?
With AUTOCOMPLEMENT I will elucidate how PTM-reactive B cells receive ‘autoadjuvant’ signals. This insight will impact on patient care as we can now design strategies to either block unwanted ‘autoadjuvant’ signals to inhibit autoimmunity or to utilize ‘autoadjuvant’ signals to potentiate vaccination.
Summary
In many prevalent autoimmune diseases such as rheumatoid arthritis (RA) and systemic lupus erythematosus (SLE) autoantibodies are used as diagnostic and prognostic tools. Several of these autoantibodies target proteins that have been post-translationally modified (PTM). Examples of such modifications are citrullination and carbamylation. The success of B cell-targeted therapies in many auto-antibody positive diseases suggests that B cell mediated auto-immunity is playing a direct pathogenic role. Despite the wealth of information on the clinical associations of these anti-PTM protein antibodies as biomarkers we have currently no insight into why these antibodies are formed.
Immunization studies reveal that PTM proteins can induce antibody responses even in the absence of exogenous adjuvant. The reason why these PTM proteins have ‘autoadjuvant’ properties that lead to a breach of tolerance is currently unknown. In this proposal, I hypothesise that the breach of tolerance towards PTM proteins is mediated by complement factors that bind directly to these PTM. Our preliminary data indeed reveal that several complement factors bind specifically to PTM proteins. Complement could be involved in the autoadjuvant property of PTM proteins as next to killing pathogens complement can also boost adaptive immune responses. I plan to unravel the importance of the complement–PTM protein interaction by answering these questions:
1) What is the physiological function of complement binding to PTM proteins?
2) Is the breach of tolerance towards PTM proteins influenced by complement?
3) Can the adjuvant function of PTM be used to increase vaccine efficacy and/or decrease autoreactivity?
With AUTOCOMPLEMENT I will elucidate how PTM-reactive B cells receive ‘autoadjuvant’ signals. This insight will impact on patient care as we can now design strategies to either block unwanted ‘autoadjuvant’ signals to inhibit autoimmunity or to utilize ‘autoadjuvant’ signals to potentiate vaccination.
Max ERC Funding
1 999 803 €
Duration
Start date: 2017-09-01, End date: 2022-08-31
Project acronym Bio-ICD
Project Biological auto-detection and termination of heart rhythm disturbances
Researcher (PI) Daniël Antonie PIJNAPPELS
Host Institution (HI) ACADEMISCH ZIEKENHUIS LEIDEN
Call Details Starting Grant (StG), LS7, ERC-2016-STG
Summary Imagine a heart that could no longer suffer from life-threatening rhythm disturbances, and not because of pills or traumatizing electroshocks from an Implantable Cardioverter Defibrillator (ICD) device. Instead, this heart has become able to rapidly detect & terminate these malignant arrhythmias fully on its own, after gene transfer. In order to explore this novel concept of biological auto-detection & termination of arrhythmias, I will investigate how forced expression of particular engineered proteins could i) allow cardiac tissue to become a detector of arrhythmias through rapid sensing of acute physiological changes upon their initiation. And how after detection, ii) this cardiac tissue (now as effector), could terminate the arrhythmia by generating a painless electroshock through these proteins.
To this purpose, I will first explore the requirements for such detection & termination by studying arrhythmia initiation and termination in rat models of atrial & ventricular arrhythmias using optical probes and light-gated ion channels. These insights will guide computer-based screening of proteins to identify those properties allowing effective arrhythmia detection & termination. These data will be used for rational engineering of the proteins with the desired properties, followed by their forced expression in cardiac cells and slices to assess anti-arrhythmic potential & safety. Promising proteins will be expressed in whole hearts to study their anti-arrhythmic effects and mechanisms, after which the most effective ones will be studied in awake rats.
This unexplored concept of self-resetting an acutely disturbed physiological state by establishing a biological detector-effector system may yield unique insight into arrhythmia management. Hence, this could provide distinctively innovative therapeutic rationales in which a diseased organ begets its own remedy, e.g. a Biologically-Integrated Cardiac Defibrillator (Bio-ICD).
Summary
Imagine a heart that could no longer suffer from life-threatening rhythm disturbances, and not because of pills or traumatizing electroshocks from an Implantable Cardioverter Defibrillator (ICD) device. Instead, this heart has become able to rapidly detect & terminate these malignant arrhythmias fully on its own, after gene transfer. In order to explore this novel concept of biological auto-detection & termination of arrhythmias, I will investigate how forced expression of particular engineered proteins could i) allow cardiac tissue to become a detector of arrhythmias through rapid sensing of acute physiological changes upon their initiation. And how after detection, ii) this cardiac tissue (now as effector), could terminate the arrhythmia by generating a painless electroshock through these proteins.
To this purpose, I will first explore the requirements for such detection & termination by studying arrhythmia initiation and termination in rat models of atrial & ventricular arrhythmias using optical probes and light-gated ion channels. These insights will guide computer-based screening of proteins to identify those properties allowing effective arrhythmia detection & termination. These data will be used for rational engineering of the proteins with the desired properties, followed by their forced expression in cardiac cells and slices to assess anti-arrhythmic potential & safety. Promising proteins will be expressed in whole hearts to study their anti-arrhythmic effects and mechanisms, after which the most effective ones will be studied in awake rats.
This unexplored concept of self-resetting an acutely disturbed physiological state by establishing a biological detector-effector system may yield unique insight into arrhythmia management. Hence, this could provide distinctively innovative therapeutic rationales in which a diseased organ begets its own remedy, e.g. a Biologically-Integrated Cardiac Defibrillator (Bio-ICD).
Max ERC Funding
1 485 028 €
Duration
Start date: 2017-03-01, End date: 2022-02-28
Project acronym BIOCCORA
Project Full biomechanical characterization of the coronary atherosclerotic plaque: biomechanics meets imaging
Researcher (PI) Jolanda Wentzel
Host Institution (HI) ERASMUS UNIVERSITAIR MEDISCH CENTRUM ROTTERDAM
Call Details Starting Grant (StG), LS7, ERC-2012-StG_20111109
Summary Myocardial infarction is responsible for nearly 40% of the mortality in the western world and is mainly triggered by rupture of vulnerable atherosclerotic plaques in the coronary arteries. Biomechanical parameters play a major role in the generation and rupture of vulnerable plaques. I was the first to show the relationship between shear stress – one of the biomechanical parameters - and plaque formation in human coronary arteries in vivo. This accomplishment was achieved by the development of a new 3D reconstruction technique for (human) coronary arteries in vivo. This reconstruction technique allowed assessment of shear stress by computational fluid dynamics and thereby opened new avenues for serial studies on the role of biomechanical parameters in cardiovascular disease. However, these reconstructions lack information on the vessel wall composition, which is essential for stress computations in the vessel wall. Recent developments in intravascular image technologies allow visualization of one or more of the different plaque components. Therefore, advances in image fusion are required to merge the different plaque components into one single 3D vulnerable plaque reconstruction. I will go beyond the state-of-the art in image based modeling by developing novel technology to 3D reconstruct coronary lumen and vessel wall, including plaque composition and assess biomechanical tissue properties allowing for full biomechanical characterization (shear stress and wall stress) of the coronary plaque. The developed technology will be applied to study 1) vulnerable plaque progression, destabilization and rupture, to improve identification of risk on myocardial infarction and 2) predicting treatment outcome of stent implantation by simulating stent deployment, thereby opening a whole new direction in cardiovascular research.
Summary
Myocardial infarction is responsible for nearly 40% of the mortality in the western world and is mainly triggered by rupture of vulnerable atherosclerotic plaques in the coronary arteries. Biomechanical parameters play a major role in the generation and rupture of vulnerable plaques. I was the first to show the relationship between shear stress – one of the biomechanical parameters - and plaque formation in human coronary arteries in vivo. This accomplishment was achieved by the development of a new 3D reconstruction technique for (human) coronary arteries in vivo. This reconstruction technique allowed assessment of shear stress by computational fluid dynamics and thereby opened new avenues for serial studies on the role of biomechanical parameters in cardiovascular disease. However, these reconstructions lack information on the vessel wall composition, which is essential for stress computations in the vessel wall. Recent developments in intravascular image technologies allow visualization of one or more of the different plaque components. Therefore, advances in image fusion are required to merge the different plaque components into one single 3D vulnerable plaque reconstruction. I will go beyond the state-of-the art in image based modeling by developing novel technology to 3D reconstruct coronary lumen and vessel wall, including plaque composition and assess biomechanical tissue properties allowing for full biomechanical characterization (shear stress and wall stress) of the coronary plaque. The developed technology will be applied to study 1) vulnerable plaque progression, destabilization and rupture, to improve identification of risk on myocardial infarction and 2) predicting treatment outcome of stent implantation by simulating stent deployment, thereby opening a whole new direction in cardiovascular research.
Max ERC Funding
1 877 000 €
Duration
Start date: 2013-05-01, End date: 2019-04-30
Project acronym BIOELECPRO
Project Frontier Research on the Dielectric Properties of Biological Tissue
Researcher (PI) Martin James O'Halloran
Host Institution (HI) NATIONAL UNIVERSITY OF IRELAND GALWAY
Call Details Starting Grant (StG), LS7, ERC-2014-STG
Summary The dielectric properties of biological tissues are of fundamental importance to the understanding of the interaction of electromagnetic fields with the human body. These properties are used to determine the safety of electronic devices, and in the design, development and refinement of electromagnetic medical imaging and therapeutic devices. Many historical studies have aimed to establish the dielectric properties of a broad range of tissues. A growing number of recent studies have sought to more accurately estimate these dielectric properties by standardising measurement procedures, and in some cases, measuring the dielectric properties in-vivo. However, these studies have often produced results in direct conflict with historical studies, casting doubt on the accuracy of the currently utilised dielectric properties. At best, this uncertainty could significantly delay the development of electromagnetic imaging or therapeutic medical devices. At worst, the health dangers of electromagnetic radiation could be under-estimated. The applicant will embark upon frontier research to develop improved methods and standards for the measurement of the dielectric properties of biological tissue. The research programme will accelerate the design and development of electromagnetic imaging and therapeutic devices, at a time when the technology is gaining significant momentum. The primary objective of the research is to develop a deep understanding of the fundamental factors which contribute to errors in dielectric property measurement. These factors will include in-vivo/ex-vivo measurements and dielectric measurement method used, amongst many others. Secondly, a new open-access repository of dielectric measurements will be created based on a greatly enhanced understanding of the mechanisms underlying dielectric property measurement. Finally, new electromagnetic-based imaging and therapeutic medical devices will be investigated, based on the solid foundation of dielectric data.
Summary
The dielectric properties of biological tissues are of fundamental importance to the understanding of the interaction of electromagnetic fields with the human body. These properties are used to determine the safety of electronic devices, and in the design, development and refinement of electromagnetic medical imaging and therapeutic devices. Many historical studies have aimed to establish the dielectric properties of a broad range of tissues. A growing number of recent studies have sought to more accurately estimate these dielectric properties by standardising measurement procedures, and in some cases, measuring the dielectric properties in-vivo. However, these studies have often produced results in direct conflict with historical studies, casting doubt on the accuracy of the currently utilised dielectric properties. At best, this uncertainty could significantly delay the development of electromagnetic imaging or therapeutic medical devices. At worst, the health dangers of electromagnetic radiation could be under-estimated. The applicant will embark upon frontier research to develop improved methods and standards for the measurement of the dielectric properties of biological tissue. The research programme will accelerate the design and development of electromagnetic imaging and therapeutic devices, at a time when the technology is gaining significant momentum. The primary objective of the research is to develop a deep understanding of the fundamental factors which contribute to errors in dielectric property measurement. These factors will include in-vivo/ex-vivo measurements and dielectric measurement method used, amongst many others. Secondly, a new open-access repository of dielectric measurements will be created based on a greatly enhanced understanding of the mechanisms underlying dielectric property measurement. Finally, new electromagnetic-based imaging and therapeutic medical devices will be investigated, based on the solid foundation of dielectric data.
Max ERC Funding
1 499 329 €
Duration
Start date: 2015-10-01, End date: 2020-09-30
Project acronym BIOMECHTOOLS
Project Biomechanical diagnostic, pre-planning and outcome tools to improve musculoskeletal surgery
Researcher (PI) Nicolaas Verdonschot
Host Institution (HI) STICHTING KATHOLIEKE UNIVERSITEIT
Call Details Advanced Grant (AdG), LS7, ERC-2012-ADG_20120314
Summary The aetiology of many musculoskeletal (MS) diseases is related to biomechanical factors. However, the tools to assess the biomechanical condition of patients used by clinicians and researchers are often crude and subjective leading to non-optimal patient analyses and care. In this project innovations related to imaging, sensor technology and biomechanical modelling are utilized to generate versatile, accurate and objective methods to quantify the (pathological) MS condition of the lower extremity of patients in a unique manner. The project will produce advanced diagnostic, pre-planning and outcome tools which allow clinicians and researchers for detailed biomechanical analysis about abnormal tissue deformations, pathological loading of the joints, abnormal stresses in the hard and soft tissues, and aberrant joint kinematics.
The key objectives of this proposal are:
1) Develop and validate image-based 3-D volumetric elastographic diagnostic methods that can quantify normal and pathological conditions under dynamic loading and which can be linked to biomechanical modelling tools.
2) Create an ultrasound (US)-based system to assess internal joint kinematics which can be used as a diagnostic tool for clinicians and researchers and is a validation tool for biomechanical modelling.
3) Generate and validate an ambulant functional (force and kinematic) diagnostic system which is easy to use and which can be used to provide input data for biomechanical models.
4) Create and validate a new modelling approach that integrates muscle-models with finite element models at a highly personalized level.
5) Generate biomechanical models which have personalized mechanical properties of the hard and soft tissues.
6) Demonstrate the applicability of the personalized diagnostic and pre-planning platform by application to healthy individuals and patient subjects.
Support from the ERC will open new research fields related to biomechanical patient assessment and modeling of MS pathologies.
Summary
The aetiology of many musculoskeletal (MS) diseases is related to biomechanical factors. However, the tools to assess the biomechanical condition of patients used by clinicians and researchers are often crude and subjective leading to non-optimal patient analyses and care. In this project innovations related to imaging, sensor technology and biomechanical modelling are utilized to generate versatile, accurate and objective methods to quantify the (pathological) MS condition of the lower extremity of patients in a unique manner. The project will produce advanced diagnostic, pre-planning and outcome tools which allow clinicians and researchers for detailed biomechanical analysis about abnormal tissue deformations, pathological loading of the joints, abnormal stresses in the hard and soft tissues, and aberrant joint kinematics.
The key objectives of this proposal are:
1) Develop and validate image-based 3-D volumetric elastographic diagnostic methods that can quantify normal and pathological conditions under dynamic loading and which can be linked to biomechanical modelling tools.
2) Create an ultrasound (US)-based system to assess internal joint kinematics which can be used as a diagnostic tool for clinicians and researchers and is a validation tool for biomechanical modelling.
3) Generate and validate an ambulant functional (force and kinematic) diagnostic system which is easy to use and which can be used to provide input data for biomechanical models.
4) Create and validate a new modelling approach that integrates muscle-models with finite element models at a highly personalized level.
5) Generate biomechanical models which have personalized mechanical properties of the hard and soft tissues.
6) Demonstrate the applicability of the personalized diagnostic and pre-planning platform by application to healthy individuals and patient subjects.
Support from the ERC will open new research fields related to biomechanical patient assessment and modeling of MS pathologies.
Max ERC Funding
2 456 400 €
Duration
Start date: 2013-05-01, End date: 2018-04-30
Project acronym BUBBLE CURE
Project Targeted microbubble vibrations to accurately diagnose and treat cardiac device-related bacterial biofilm infections
Researcher (PI) Klazina KOOIMAN
Host Institution (HI) ERASMUS UNIVERSITAIR MEDISCH CENTRUM ROTTERDAM
Call Details Starting Grant (StG), LS7, ERC-2018-STG
Summary Due to an aging population, increasingly more cardiac devices are implanted (pacemaker/ICD/CRT/ prosthetic valve/LVAD; worldwide ~2 million yearly). Life-threatening bacterial infections (1-60% infection and 29-50% mortality rate) associated with these devices are a major healthcare burden and pose scientific challenges. Ultrasound imaging is currently the primary diagnostic modality. However, it lacks specificity and sensitivity because the signal from the bacteria is similar to the signal of healthy tissue or the cardiac device, thus making accurate diagnosis impossible. Recent developments in targeted ultrasound contrast agents (i.e. targeted microbubbles (tMB), 1-8 micron in size) allow ultrasound imaging of a specific tMB vibration signal resulting in exceptional sensitivity and specificity. Advancing tMB imaging to detect bacterial infections is needed to solve the challenges caused by the complex ultrasound field from these devices. I was the first to show that vibrating tMB induce vascular drug uptake, thereby showing the potential of tMB as a theranostic agent by combining imaging with drug delivery. Recently, my team and I were also the first to demonstrate which tMB vibrations kill vessel wall cells in vitro by developing analysis methods that link tMB vibrations to drug uptake patterns on a single cell layer. As this is the first time this technique will be applied to 3D bacterial biofilm infections on cardiac devices, I will go beyond the state-of-the-art in tMB-tissue interaction technology by developing novel detection, analysis, and modeling methods to accurately determine which tMB vibrations eradicate bacterial biofilm infections on devices.
The Bubble Cure project will result in a novel multidisciplinary technology that allows accurate diagnosis and treatment of cardiac device-related bacterial biofilm infections, thereby creating a whole new direction of tMB ultrasound imaging and therapy in the scientific field of cardiology and microbiology.
Summary
Due to an aging population, increasingly more cardiac devices are implanted (pacemaker/ICD/CRT/ prosthetic valve/LVAD; worldwide ~2 million yearly). Life-threatening bacterial infections (1-60% infection and 29-50% mortality rate) associated with these devices are a major healthcare burden and pose scientific challenges. Ultrasound imaging is currently the primary diagnostic modality. However, it lacks specificity and sensitivity because the signal from the bacteria is similar to the signal of healthy tissue or the cardiac device, thus making accurate diagnosis impossible. Recent developments in targeted ultrasound contrast agents (i.e. targeted microbubbles (tMB), 1-8 micron in size) allow ultrasound imaging of a specific tMB vibration signal resulting in exceptional sensitivity and specificity. Advancing tMB imaging to detect bacterial infections is needed to solve the challenges caused by the complex ultrasound field from these devices. I was the first to show that vibrating tMB induce vascular drug uptake, thereby showing the potential of tMB as a theranostic agent by combining imaging with drug delivery. Recently, my team and I were also the first to demonstrate which tMB vibrations kill vessel wall cells in vitro by developing analysis methods that link tMB vibrations to drug uptake patterns on a single cell layer. As this is the first time this technique will be applied to 3D bacterial biofilm infections on cardiac devices, I will go beyond the state-of-the-art in tMB-tissue interaction technology by developing novel detection, analysis, and modeling methods to accurately determine which tMB vibrations eradicate bacterial biofilm infections on devices.
The Bubble Cure project will result in a novel multidisciplinary technology that allows accurate diagnosis and treatment of cardiac device-related bacterial biofilm infections, thereby creating a whole new direction of tMB ultrasound imaging and therapy in the scientific field of cardiology and microbiology.
Max ERC Funding
1 878 000 €
Duration
Start date: 2019-01-01, End date: 2023-12-31