Project acronym 321
Project from Cubic To Linear complexity in computational electromagnetics
Researcher (PI) Francesco Paolo ANDRIULLI
Host Institution (HI) POLITECNICO DI TORINO
Country Italy
Call Details Consolidator Grant (CoG), PE7, ERC-2016-COG
Summary Computational Electromagnetics (CEM) is the scientific field at the origin of all new modeling and simulation tools required by the constantly arising design challenges of emerging and future technologies in applied electromagnetics. As in many other technological fields, however, the trend in all emerging technologies in electromagnetic engineering is going towards miniaturized, higher density and multi-scale scenarios. Computationally speaking this translates in the steep increase of the number of degrees of freedom. Given that the design cost (the cost of a multi-right-hand side problem dominated by matrix inversion) can scale as badly as cubically with these degrees of freedom, this fact, as pointed out by many, will sensibly compromise the practical impact of CEM on future and emerging technologies.
For this reason, the CEM scientific community has been looking for years for a FFT-like paradigm shift: a dynamic fast direct solver providing a design cost that would scale only linearly with the degrees of freedom. Such a fast solver is considered today a Holy Grail of the discipline.
The Grand Challenge of 321 will be to tackle this Holy Grail in Computational Electromagnetics by investigating a dynamic Fast Direct Solver for Maxwell Problems that would run in a linear-instead-of-cubic complexity for an arbitrary number and configuration of degrees of freedom.
The failure of all previous attempts will be overcome by a game-changing transformation of the CEM classical problem that will leverage on a recent breakthrough of the PI. Starting from this, the project will investigate an entire new paradigm for impacting algorithms to achieve this grand challenge.
The impact of the FFT’s quadratic-to-linear paradigm shift shows how computational complexity reductions can be groundbreaking on applications. The cubic-to-linear paradigm shift, which the 321 project will aim for, will have such a rupturing impact on electromagnetic science and technology.
Summary
Computational Electromagnetics (CEM) is the scientific field at the origin of all new modeling and simulation tools required by the constantly arising design challenges of emerging and future technologies in applied electromagnetics. As in many other technological fields, however, the trend in all emerging technologies in electromagnetic engineering is going towards miniaturized, higher density and multi-scale scenarios. Computationally speaking this translates in the steep increase of the number of degrees of freedom. Given that the design cost (the cost of a multi-right-hand side problem dominated by matrix inversion) can scale as badly as cubically with these degrees of freedom, this fact, as pointed out by many, will sensibly compromise the practical impact of CEM on future and emerging technologies.
For this reason, the CEM scientific community has been looking for years for a FFT-like paradigm shift: a dynamic fast direct solver providing a design cost that would scale only linearly with the degrees of freedom. Such a fast solver is considered today a Holy Grail of the discipline.
The Grand Challenge of 321 will be to tackle this Holy Grail in Computational Electromagnetics by investigating a dynamic Fast Direct Solver for Maxwell Problems that would run in a linear-instead-of-cubic complexity for an arbitrary number and configuration of degrees of freedom.
The failure of all previous attempts will be overcome by a game-changing transformation of the CEM classical problem that will leverage on a recent breakthrough of the PI. Starting from this, the project will investigate an entire new paradigm for impacting algorithms to achieve this grand challenge.
The impact of the FFT’s quadratic-to-linear paradigm shift shows how computational complexity reductions can be groundbreaking on applications. The cubic-to-linear paradigm shift, which the 321 project will aim for, will have such a rupturing impact on electromagnetic science and technology.
Max ERC Funding
2 000 000 €
Duration
Start date: 2017-09-01, End date: 2023-08-31
Project acronym 3D-CAP
Project 3D micro-supercapacitors for embedded electronics
Researcher (PI) David Sarinn PECH
Host Institution (HI) CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
Country France
Call Details Consolidator Grant (CoG), PE7, ERC-2017-COG
Summary The realization of high-performance micro-supercapacitors is currently a big challenge but the ineluctable applications requiring such miniaturized energy storage devices are continuously emerging, from wearable electronic gadgets to wireless sensor networks. Although they store less energy than micro-batteries, micro-supercapacitors can be charged and discharged very rapidly and exhibit a quasi-unlimited lifetime. The global scientific research is consequently largely focused on the improvement of their capacitance and energetic performances. However, to date, they are still far from being able to power sensors or electronic components.
Here I propose a 3D paradigm shift of micro-supercapacitor design to ensure increased energy storage capacities. Hydrous ruthenium dioxide (RuO2) is a pseudocapacitive material for supercapacitor electrode well-known for its high capacitance. A thin-film of ruthenium will be deposited by atomic layer deposition (ALD), followed by an electrochemical oxidation process, onto a high-surface-area 3D current collector prepared via an ingenious dynamic template built with hydrogen bubbles. The structural features of these 3D architectures will be controllably tailored by the processing methodologies. These electrodes will be combined with an innovative electrolyte in solid form (a protic ionogel) able to operate over an extended cell voltage. In a parallel investigation, we will develop a fundamental understanding of electrochemical reactions occurring at the nanoscale with a FIB-patterned (Focused Ion Beam) RuO2 nano-supercapacitor. The resulting 3D micro-supercapacitors should display extremely high power, long lifetime and – for the first time – energy densities competing or even exceeding that of micro-batteries. As a key achievement, prototypes will be designed using a new concept based on a self-adaptative micro-supercapacitors matrix, which arranges itself according to the global amount of energy stored.
Summary
The realization of high-performance micro-supercapacitors is currently a big challenge but the ineluctable applications requiring such miniaturized energy storage devices are continuously emerging, from wearable electronic gadgets to wireless sensor networks. Although they store less energy than micro-batteries, micro-supercapacitors can be charged and discharged very rapidly and exhibit a quasi-unlimited lifetime. The global scientific research is consequently largely focused on the improvement of their capacitance and energetic performances. However, to date, they are still far from being able to power sensors or electronic components.
Here I propose a 3D paradigm shift of micro-supercapacitor design to ensure increased energy storage capacities. Hydrous ruthenium dioxide (RuO2) is a pseudocapacitive material for supercapacitor electrode well-known for its high capacitance. A thin-film of ruthenium will be deposited by atomic layer deposition (ALD), followed by an electrochemical oxidation process, onto a high-surface-area 3D current collector prepared via an ingenious dynamic template built with hydrogen bubbles. The structural features of these 3D architectures will be controllably tailored by the processing methodologies. These electrodes will be combined with an innovative electrolyte in solid form (a protic ionogel) able to operate over an extended cell voltage. In a parallel investigation, we will develop a fundamental understanding of electrochemical reactions occurring at the nanoscale with a FIB-patterned (Focused Ion Beam) RuO2 nano-supercapacitor. The resulting 3D micro-supercapacitors should display extremely high power, long lifetime and – for the first time – energy densities competing or even exceeding that of micro-batteries. As a key achievement, prototypes will be designed using a new concept based on a self-adaptative micro-supercapacitors matrix, which arranges itself according to the global amount of energy stored.
Max ERC Funding
1 673 438 €
Duration
Start date: 2018-04-01, End date: 2023-03-31
Project acronym 3D-JOINT
Project 3D Bioprinting of JOINT Replacements
Researcher (PI) Johannes Jos Malda
Host Institution (HI) UNIVERSITAIR MEDISCH CENTRUM UTRECHT
Country Netherlands
Call Details Consolidator Grant (CoG), LS7, ERC-2014-CoG
Summary The world has a significant medical challenge in repairing injured or diseased joints. Joint degeneration and its related pain is a major socio-economic burden that will increase over the next decade and is currently addressed by implanting a metal prosthesis. For the long term, the ideal solution to joint injury is to successfully regenerate rather than replace the damaged cartilage with synthetic implants. Recent advances in key technologies are now bringing this “holy grail” within reach; regenerative approaches, based on cell therapy, are already clinically available albeit only for smaller focal cartilage defects.
One of these key technologies is three-dimensional (3D) bio-printing, which provides a greatly controlled placement and organization of living constructs through the layer-by-layer deposition of materials and cells. These tissue constructs can be applied as tissue models for research and screening. However, the lack of biomechanical properties of these tissue constructs has hampered their application to the regeneration of damaged, degenerated or diseased tissue.
Having established a cartilage-focussed research laboratory in the University Medical Center Utrecht, I have addressed this biomechanical limitation of hydrogels through the use of hydrogel composites. Specifically, I have pioneered a 3D bio-printing technology that combines accurately printed small diameter thermoplast filaments with cell invasive hydrogels to form strong fibre-reinforced constructs. This, in combination with bioreactor technology, is the key to the generation of larger, complex tissue constructs with cartilage-like biomechanical resilience. With 3D-JOINT I will use my in-depth bio-printing and bioreactor knowledge and experience to develop a multi-phasic 3D-printed biological replacement of the joint.
Summary
The world has a significant medical challenge in repairing injured or diseased joints. Joint degeneration and its related pain is a major socio-economic burden that will increase over the next decade and is currently addressed by implanting a metal prosthesis. For the long term, the ideal solution to joint injury is to successfully regenerate rather than replace the damaged cartilage with synthetic implants. Recent advances in key technologies are now bringing this “holy grail” within reach; regenerative approaches, based on cell therapy, are already clinically available albeit only for smaller focal cartilage defects.
One of these key technologies is three-dimensional (3D) bio-printing, which provides a greatly controlled placement and organization of living constructs through the layer-by-layer deposition of materials and cells. These tissue constructs can be applied as tissue models for research and screening. However, the lack of biomechanical properties of these tissue constructs has hampered their application to the regeneration of damaged, degenerated or diseased tissue.
Having established a cartilage-focussed research laboratory in the University Medical Center Utrecht, I have addressed this biomechanical limitation of hydrogels through the use of hydrogel composites. Specifically, I have pioneered a 3D bio-printing technology that combines accurately printed small diameter thermoplast filaments with cell invasive hydrogels to form strong fibre-reinforced constructs. This, in combination with bioreactor technology, is the key to the generation of larger, complex tissue constructs with cartilage-like biomechanical resilience. With 3D-JOINT I will use my in-depth bio-printing and bioreactor knowledge and experience to develop a multi-phasic 3D-printed biological replacement of the joint.
Max ERC Funding
1 998 871 €
Duration
Start date: 2015-07-01, End date: 2020-06-30
Project acronym 3D-VIEW
Project Seeing the invisible: Light-based 3D imaging of opaque nanostructures
Researcher (PI) Stefan WITTE
Host Institution (HI) STICHTING NEDERLANDSE WETENSCHAPPELIJK ONDERZOEK INSTITUTEN
Country Netherlands
Call Details Consolidator Grant (CoG), PE7, ERC-2019-COG
Summary Nanostructures drive the world around us. Every modern electronic device contains integrated circuits and nano-electronics to provide its functionality. Advances in nanotechnology directly impact society by enabling smartphones, autonomous devices, the internet of things, data storage, and essentially all forms of advanced technology. Fabricating such nanostructures crucially depends on having the tools to make them visible without destroying them. Modern nanodevices often have complex three-dimensional architectures with small features in all dimensions. While imaging methods that achieve nanometer-scale resolution exist, there are currently no compact tools that can look inside 3D nanostructures made out of metals and semiconductors without damaging their delicate internal structure. I will address this challenge by developing compact tools to image 3D nanostructures in a non-invasive way. Even though most nanostructures are completely opaque to visible light, I will develop light-based methods, combined with computational imaging techniques developed in my previous ERC project, to look inside them with unprecedented resolution and contrast. Light-based imaging is unparalleled in speed and versatility, and allows contact-free detection. My proposal is to: 1) Use compact laser-produced soft-X-ray sources to image nanostructures with high 3D resolution and element-sensitive contrast; 2) Use laser-induced ultrasound pulses to image complex 3D nanostructures, even through strongly absorbing materials; 3) Employ computational imaging methods to reconstruct high-resolution 3D object images from the resulting complex diffraction signals. I will forge a coordinated research program to bring these concepts to reality. This program provides exciting prospects for fundamental science and industrial metrology. I will go beyond the state-of-the-art in nano-imaging, to extend our vision into the complex interior of the smallest structures found in science and technology.
Summary
Nanostructures drive the world around us. Every modern electronic device contains integrated circuits and nano-electronics to provide its functionality. Advances in nanotechnology directly impact society by enabling smartphones, autonomous devices, the internet of things, data storage, and essentially all forms of advanced technology. Fabricating such nanostructures crucially depends on having the tools to make them visible without destroying them. Modern nanodevices often have complex three-dimensional architectures with small features in all dimensions. While imaging methods that achieve nanometer-scale resolution exist, there are currently no compact tools that can look inside 3D nanostructures made out of metals and semiconductors without damaging their delicate internal structure. I will address this challenge by developing compact tools to image 3D nanostructures in a non-invasive way. Even though most nanostructures are completely opaque to visible light, I will develop light-based methods, combined with computational imaging techniques developed in my previous ERC project, to look inside them with unprecedented resolution and contrast. Light-based imaging is unparalleled in speed and versatility, and allows contact-free detection. My proposal is to: 1) Use compact laser-produced soft-X-ray sources to image nanostructures with high 3D resolution and element-sensitive contrast; 2) Use laser-induced ultrasound pulses to image complex 3D nanostructures, even through strongly absorbing materials; 3) Employ computational imaging methods to reconstruct high-resolution 3D object images from the resulting complex diffraction signals. I will forge a coordinated research program to bring these concepts to reality. This program provides exciting prospects for fundamental science and industrial metrology. I will go beyond the state-of-the-art in nano-imaging, to extend our vision into the complex interior of the smallest structures found in science and technology.
Max ERC Funding
2 000 000 €
Duration
Start date: 2020-10-01, End date: 2025-09-30
Project acronym 3D2DPrint
Project 3D Printing of Novel 2D Nanomaterials: Adding Advanced 2D Functionalities to Revolutionary Tailored 3D Manufacturing
Researcher (PI) Valeria Nicolosi
Host Institution (HI) THE PROVOST, FELLOWS, FOUNDATION SCHOLARS & THE OTHER MEMBERS OF BOARD OF THE COLLEGE OF THE HOLY & UNDIVIDED TRINITY OF QUEEN ELIZABETH NEAR DUBLIN
Country Ireland
Call Details Consolidator Grant (CoG), PE8, ERC-2015-CoG
Summary My vision is to establish, within the framework of an ERC CoG, a multidisciplinary group which will work in concert towards pioneering the integration of novel 2-Dimensional nanomaterials with novel additive fabrication techniques to develop a unique class of energy storage devices.
Batteries and supercapacitors are two very complementary types of energy storage devices. Batteries store much higher energy densities; supercapacitors, on the other hand, hold one tenth of the electricity per unit of volume or weight as compared to batteries but can achieve much higher power densities. Technology is currently striving to improve the power density of batteries and the energy density of supercapacitors. To do so it is imperative to develop new materials, chemistries and manufacturing strategies.
3D2DPrint aims to develop micro-energy devices (both supercapacitors and batteries), technologies particularly relevant in the context of the emergent industry of micro-electro-mechanical systems and constantly downsized electronics. We plan to use novel two-dimensional (2D) nanomaterials obtained by liquid-phase exfoliation. This method offers a new, economic and easy way to prepare ink of a variety of 2D systems, allowing to produce wide device performance window through elegant and simple constituent control at the point of fabrication. 3D2DPrint will use our expertise and know-how to allow development of advanced AM methods to integrate dissimilar nanomaterial blends and/or “hybrids” into fully embedded 3D printed energy storage devices, with the ultimate objective to realise a range of products that contain the above described nanomaterials subcomponent devices, electrical connections and traditional micro-fabricated subcomponents (if needed) ideally using a single tool.
Summary
My vision is to establish, within the framework of an ERC CoG, a multidisciplinary group which will work in concert towards pioneering the integration of novel 2-Dimensional nanomaterials with novel additive fabrication techniques to develop a unique class of energy storage devices.
Batteries and supercapacitors are two very complementary types of energy storage devices. Batteries store much higher energy densities; supercapacitors, on the other hand, hold one tenth of the electricity per unit of volume or weight as compared to batteries but can achieve much higher power densities. Technology is currently striving to improve the power density of batteries and the energy density of supercapacitors. To do so it is imperative to develop new materials, chemistries and manufacturing strategies.
3D2DPrint aims to develop micro-energy devices (both supercapacitors and batteries), technologies particularly relevant in the context of the emergent industry of micro-electro-mechanical systems and constantly downsized electronics. We plan to use novel two-dimensional (2D) nanomaterials obtained by liquid-phase exfoliation. This method offers a new, economic and easy way to prepare ink of a variety of 2D systems, allowing to produce wide device performance window through elegant and simple constituent control at the point of fabrication. 3D2DPrint will use our expertise and know-how to allow development of advanced AM methods to integrate dissimilar nanomaterial blends and/or “hybrids” into fully embedded 3D printed energy storage devices, with the ultimate objective to realise a range of products that contain the above described nanomaterials subcomponent devices, electrical connections and traditional micro-fabricated subcomponents (if needed) ideally using a single tool.
Max ERC Funding
2 499 942 €
Duration
Start date: 2016-10-01, End date: 2021-09-30
Project acronym 3DAddChip
Project Additive manufacturing of 2D nanomaterials for on-chip technologies
Researcher (PI) Cecilia Mattevi
Host Institution (HI) IMPERIAL COLLEGE OF SCIENCE TECHNOLOGY AND MEDICINE
Country United Kingdom
Call Details Consolidator Grant (CoG), PE8, ERC-2018-COG
Summary The realization of “the internet of things” is inevitably constrained at the level of miniaturization that can be achieved in the electronic devices. A variety of technologies are now going through a process of miniaturization from micro-electromechanical systems (MEMS) to biomedical sensors, and actuators. The ultimate goal is to combine several components in an individual multifunctional platform, realizing on-chip technology. Devices have to be constrained to small footprints and exhibit high performance. Thus, the miniaturization process requires the introduction of new manufacturing processes to fabricate devices in the 3D space over small areas. 3D printing via robocasting is emerging as a new manufacturing technique, which allows shaping virtually any materials from polymers to ceramic and metals into complex architectures.
The goal of this research is to establish a 3D printing paradigm to produce miniaturized complex shape devices with diversified functions for on-chip technologies adaptable to “smart environment” such as flexible substrates, smart textiles and biomedical sensors. The elementary building blocks of the devices will be two-dimensional nanomaterials, which present unique optical, electrical, chemical and mechanical properties. The synergistic combination of the intrinsic characteristics of the 2D nanomaterials and the specific 3D architecture will enable advanced performance of the 3D printed objects. This research programme will demonstrate 3D miniaturized energy storage and energy conversion units fabricated with inks produced using a pilot plant. These units are essential components of any on-chip platform as they ensure energy autonomy via self-powering. Ultimately, this research will initiate new technologies based on miniaturized 3D devices.
Summary
The realization of “the internet of things” is inevitably constrained at the level of miniaturization that can be achieved in the electronic devices. A variety of technologies are now going through a process of miniaturization from micro-electromechanical systems (MEMS) to biomedical sensors, and actuators. The ultimate goal is to combine several components in an individual multifunctional platform, realizing on-chip technology. Devices have to be constrained to small footprints and exhibit high performance. Thus, the miniaturization process requires the introduction of new manufacturing processes to fabricate devices in the 3D space over small areas. 3D printing via robocasting is emerging as a new manufacturing technique, which allows shaping virtually any materials from polymers to ceramic and metals into complex architectures.
The goal of this research is to establish a 3D printing paradigm to produce miniaturized complex shape devices with diversified functions for on-chip technologies adaptable to “smart environment” such as flexible substrates, smart textiles and biomedical sensors. The elementary building blocks of the devices will be two-dimensional nanomaterials, which present unique optical, electrical, chemical and mechanical properties. The synergistic combination of the intrinsic characteristics of the 2D nanomaterials and the specific 3D architecture will enable advanced performance of the 3D printed objects. This research programme will demonstrate 3D miniaturized energy storage and energy conversion units fabricated with inks produced using a pilot plant. These units are essential components of any on-chip platform as they ensure energy autonomy via self-powering. Ultimately, this research will initiate new technologies based on miniaturized 3D devices.
Max ERC Funding
1 999 968 €
Duration
Start date: 2019-09-01, End date: 2024-08-31
Project acronym A-DIET
Project Metabolomics based biomarkers of dietary intake- new tools for nutrition research
Researcher (PI) Lorraine Brennan
Host Institution (HI) UNIVERSITY COLLEGE DUBLIN, NATIONAL UNIVERSITY OF IRELAND, DUBLIN
Country Ireland
Call Details Consolidator Grant (CoG), LS7, ERC-2014-CoG
Summary In todays advanced technological world, we can track the exact movement of individuals, analyse their genetic makeup and predict predisposition to certain diseases. However, we are unable to accurately assess an individual’s dietary intake. This is without a doubt one of the main stumbling blocks in assessing the link between diet and disease/health. The present proposal (A-DIET) will address this issue with the overarching objective to develop novel strategies for assessment of dietary intake.
Using approaches to (1) identify biomarkers of specific foods (2) classify people into dietary patterns (nutritypes) and (3) develop a tool for integration of dietary and biomarker data, A-DIET has the potential to dramatically enhance our ability to accurately assess dietary intake. The ultimate output from A-DIET will be a dietary assessment tool which can be used to obtain an accurate assessment of dietary intake by combining dietary and biomarker data which in turn will allow investigations into relationships between diet, health and disease. New biomarkers of specific foods will be identified and validated using intervention studies and metabolomic analyses. Methods will be developed to classify individuals into dietary patterns based on biomarker/metabolomic profiles thus demonstrating the novel concept of nutritypes. Strategies for integration of dietary and biomarker data will be developed and translated into a tool that will be made available to the wider scientific community.
Advances made in A-DIET will enable nutrition epidemiologist’s to properly examine the relationship between diet and disease and develop clear public health messages with regard to diet and health. Additionally results from A-DIET will allow researchers to accurately assess people’s diet and implement health promotion strategies and enable dieticians in a clinical environment to assess compliance to therapeutic diets such as adherence to a high fibre diet or a gluten free diet.
Summary
In todays advanced technological world, we can track the exact movement of individuals, analyse their genetic makeup and predict predisposition to certain diseases. However, we are unable to accurately assess an individual’s dietary intake. This is without a doubt one of the main stumbling blocks in assessing the link between diet and disease/health. The present proposal (A-DIET) will address this issue with the overarching objective to develop novel strategies for assessment of dietary intake.
Using approaches to (1) identify biomarkers of specific foods (2) classify people into dietary patterns (nutritypes) and (3) develop a tool for integration of dietary and biomarker data, A-DIET has the potential to dramatically enhance our ability to accurately assess dietary intake. The ultimate output from A-DIET will be a dietary assessment tool which can be used to obtain an accurate assessment of dietary intake by combining dietary and biomarker data which in turn will allow investigations into relationships between diet, health and disease. New biomarkers of specific foods will be identified and validated using intervention studies and metabolomic analyses. Methods will be developed to classify individuals into dietary patterns based on biomarker/metabolomic profiles thus demonstrating the novel concept of nutritypes. Strategies for integration of dietary and biomarker data will be developed and translated into a tool that will be made available to the wider scientific community.
Advances made in A-DIET will enable nutrition epidemiologist’s to properly examine the relationship between diet and disease and develop clear public health messages with regard to diet and health. Additionally results from A-DIET will allow researchers to accurately assess people’s diet and implement health promotion strategies and enable dieticians in a clinical environment to assess compliance to therapeutic diets such as adherence to a high fibre diet or a gluten free diet.
Max ERC Funding
1 995 548 €
Duration
Start date: 2015-08-01, End date: 2020-07-31
Project acronym A-FRO
Project Actively Frozen - contextual modulation of freezing and its neuronal basis
Researcher (PI) Marta de Aragao Pacheco Moita
Host Institution (HI) FUNDACAO D. ANNA SOMMER CHAMPALIMAUD E DR. CARLOS MONTEZ CHAMPALIMAUD
Country Portugal
Call Details Consolidator Grant (CoG), LS5, ERC-2018-COG
Summary When faced with a threat, an animal must decide whether to freeze, reducing its chances of being noticed, or to flee to the safety of a refuge. Animals from fish to primates choose between these two alternatives when confronted by an attacking predator, a choice that largely depends on the context in which the threat occurs. Recent work has made strides identifying the pre-motor circuits, and their inputs, which control freezing behavior in rodents, but how contextual information is integrated to guide this choice is still far from understood. We recently found that fruit flies in response to visual looming stimuli, simulating a large object on collision course, make rapid freeze/flee choices that depend on the social and spatial environment, and the fly’s internal state. Further, identification of looming detector neurons was recently reported and we identified the descending command neurons, DNp09, responsible for freezing in the fly. Knowing the sensory input and descending output for looming-evoked freezing, two environmental factors that modulate its expression, and using a genetically tractable system affording the use of large sample sizes, places us in an unique position to understand how a information about a threat is integrated with cues from the environment to guide the choice of whether to freeze (our goal). To assess how social information impinges on the circuit for freezing, we will examine the sensory inputs and neuromodulators that mediate this process, mapping their connections to DNp09 neurons (Aim 1). We ask whether learning is required for the spatial modulation of freezing, which cues flies are using to discriminate different places and which brain circuits mediate this process (Aim 2). Finally, we will study how activity of DNp09 neurons drives freezing (Aim 3). This project will provide a comprehensive understanding of the mechanism of freezing and its modulation by the environment, from single neurons to behaviour.
Summary
When faced with a threat, an animal must decide whether to freeze, reducing its chances of being noticed, or to flee to the safety of a refuge. Animals from fish to primates choose between these two alternatives when confronted by an attacking predator, a choice that largely depends on the context in which the threat occurs. Recent work has made strides identifying the pre-motor circuits, and their inputs, which control freezing behavior in rodents, but how contextual information is integrated to guide this choice is still far from understood. We recently found that fruit flies in response to visual looming stimuli, simulating a large object on collision course, make rapid freeze/flee choices that depend on the social and spatial environment, and the fly’s internal state. Further, identification of looming detector neurons was recently reported and we identified the descending command neurons, DNp09, responsible for freezing in the fly. Knowing the sensory input and descending output for looming-evoked freezing, two environmental factors that modulate its expression, and using a genetically tractable system affording the use of large sample sizes, places us in an unique position to understand how a information about a threat is integrated with cues from the environment to guide the choice of whether to freeze (our goal). To assess how social information impinges on the circuit for freezing, we will examine the sensory inputs and neuromodulators that mediate this process, mapping their connections to DNp09 neurons (Aim 1). We ask whether learning is required for the spatial modulation of freezing, which cues flies are using to discriminate different places and which brain circuits mediate this process (Aim 2). Finally, we will study how activity of DNp09 neurons drives freezing (Aim 3). This project will provide a comprehensive understanding of the mechanism of freezing and its modulation by the environment, from single neurons to behaviour.
Max ERC Funding
1 969 750 €
Duration
Start date: 2019-02-01, End date: 2024-01-31
Project acronym A-HERO
Project Anthelmintic Research and Optimization
Researcher (PI) Jennifer Irene Keiser
Host Institution (HI) SCHWEIZERISCHES TROPEN- UND PUBLIC HEALTH-INSTITUT
Country Switzerland
Call Details Consolidator Grant (CoG), LS7, ERC-2013-CoG
Summary "I propose an ambitious, yet feasible 5-year research project that will fill an important gap in global health. Specifically, I will develop and validate novel approaches for anthelmintic drug discovery and development. My proposal pursues the following five research questions: (i) Is a chip calorimeter suitable for high-throughput screening in anthelmintic drug discovery? (ii) Is combination chemotherapy safe and more efficacious than monotherapy against strongyloidiasis and trichuriasis? (iii) What are the key pharmacokinetic parameters of praziquantel in preschool-aged children and school-aged children infected with Schistosoma mansoni and S. haematobium using a novel and validated technology based on dried blood spotting? (iv) What are the metabolic consequences and clearance of praziquantel treatment in S. mansoni-infected mice and S. mansoni- and S. haematobium-infected children? (v) Which is the ideal compartment to study pharmacokinetic parameters for intestinal nematode infections and does age, nutrition, co-infection and infection intensity influence the efficacy of anthelmintic drugs?
My proposed research is of considerable public health relevance since it will ultimately result in improved treatments for soil-transmitted helminthiasis and pediatric schistosomiasis. Additionally, at the end of this project, I have generated comprehensive information on drug disposition of anthelmintics. A comprehensive database of metabolite profiles following praziquantel treatment will be available. Finally, the proof-of-concept of chip calorimetry in anthelmintic drug discovery has been established and broadly validated."
Summary
"I propose an ambitious, yet feasible 5-year research project that will fill an important gap in global health. Specifically, I will develop and validate novel approaches for anthelmintic drug discovery and development. My proposal pursues the following five research questions: (i) Is a chip calorimeter suitable for high-throughput screening in anthelmintic drug discovery? (ii) Is combination chemotherapy safe and more efficacious than monotherapy against strongyloidiasis and trichuriasis? (iii) What are the key pharmacokinetic parameters of praziquantel in preschool-aged children and school-aged children infected with Schistosoma mansoni and S. haematobium using a novel and validated technology based on dried blood spotting? (iv) What are the metabolic consequences and clearance of praziquantel treatment in S. mansoni-infected mice and S. mansoni- and S. haematobium-infected children? (v) Which is the ideal compartment to study pharmacokinetic parameters for intestinal nematode infections and does age, nutrition, co-infection and infection intensity influence the efficacy of anthelmintic drugs?
My proposed research is of considerable public health relevance since it will ultimately result in improved treatments for soil-transmitted helminthiasis and pediatric schistosomiasis. Additionally, at the end of this project, I have generated comprehensive information on drug disposition of anthelmintics. A comprehensive database of metabolite profiles following praziquantel treatment will be available. Finally, the proof-of-concept of chip calorimetry in anthelmintic drug discovery has been established and broadly validated."
Max ERC Funding
1 927 350 €
Duration
Start date: 2014-05-01, End date: 2019-04-30
Project acronym Acclimatize
Project Hypothalamic mechanisms of thermal homeostasis and adaptation
Researcher (PI) Jan SIEMENS
Host Institution (HI) UNIVERSITATSKLINIKUM HEIDELBERG
Country Germany
Call Details Consolidator Grant (CoG), LS5, ERC-2017-COG
Summary Mammalian organisms possess the remarkable ability to maintain internal body temperature (Tcore) within a narrow range close to 37°C despite wide environmental temperature variations. The brain’s neural “thermostat” is made up by central circuits in the hypothalamic preoptic area (POA), which orchestrate peripheral thermoregulatory responses to maintain Tcore. Thermogenesis requires metabolic fuel, suggesting intricate connections between the thermoregulatory centre and hypothalamic circuits controlling energy balance. How the POA detects and integrates temperature and metabolic information to achieve thermal balance is largely unknown. A major question is whether this circuitry could be harnessed therapeutically to treat obesity.
We have recently identified the first known molecular temperature sensor in thermoregulatory neurons of the POA, transient receptor potential melastatin 2 (TRPM2), a thermo-sensitive ion channel. I aim to use TRPM2 as a molecular marker to gain access to and probe the function of thermoregulatory neurons in vivo. I propose a multidisciplinary approach, combining local, in vivo POA temperature stimulation with optogenetic circuit-mapping to uncover the molecular and cellular logic of the hypothalamic thermoregulatory centre and to assess its medical potential to counteract metabolic syndrome.
Acclimation is a beneficial adaptive process that fortifies thermal responses upon environmental temperature challenges. Thermoregulatory neuron plasticity is thought to mediate acclimation. Conversely, maladaptive thermoregulatory changes affect obesity. The cell-type-specific neuronal plasticity mechanisms underlying these changes within the POA, however, are unknown.
Using ex-vivo slice electrophysiology and in vivo imaging, I propose to characterize acclimation- and obesity-induced plasticity of thermoregulatory neurons. Ultimately, I aim to manipulate thermoregulatory neuron plasticity to test its potential counter-balancing effect on obesity.
Summary
Mammalian organisms possess the remarkable ability to maintain internal body temperature (Tcore) within a narrow range close to 37°C despite wide environmental temperature variations. The brain’s neural “thermostat” is made up by central circuits in the hypothalamic preoptic area (POA), which orchestrate peripheral thermoregulatory responses to maintain Tcore. Thermogenesis requires metabolic fuel, suggesting intricate connections between the thermoregulatory centre and hypothalamic circuits controlling energy balance. How the POA detects and integrates temperature and metabolic information to achieve thermal balance is largely unknown. A major question is whether this circuitry could be harnessed therapeutically to treat obesity.
We have recently identified the first known molecular temperature sensor in thermoregulatory neurons of the POA, transient receptor potential melastatin 2 (TRPM2), a thermo-sensitive ion channel. I aim to use TRPM2 as a molecular marker to gain access to and probe the function of thermoregulatory neurons in vivo. I propose a multidisciplinary approach, combining local, in vivo POA temperature stimulation with optogenetic circuit-mapping to uncover the molecular and cellular logic of the hypothalamic thermoregulatory centre and to assess its medical potential to counteract metabolic syndrome.
Acclimation is a beneficial adaptive process that fortifies thermal responses upon environmental temperature challenges. Thermoregulatory neuron plasticity is thought to mediate acclimation. Conversely, maladaptive thermoregulatory changes affect obesity. The cell-type-specific neuronal plasticity mechanisms underlying these changes within the POA, however, are unknown.
Using ex-vivo slice electrophysiology and in vivo imaging, I propose to characterize acclimation- and obesity-induced plasticity of thermoregulatory neurons. Ultimately, I aim to manipulate thermoregulatory neuron plasticity to test its potential counter-balancing effect on obesity.
Max ERC Funding
1 902 500 €
Duration
Start date: 2018-09-01, End date: 2023-08-31
