Project acronym 14Constraint
Project Radiocarbon constraints for models of C cycling in terrestrial ecosystems: from process understanding to global benchmarking
Researcher (PI) Susan Trumbore
Host Institution (HI) MAX-PLANCK-GESELLSCHAFT ZUR FORDERUNG DER WISSENSCHAFTEN EV
Country Germany
Call Details Advanced Grant (AdG), PE10, ERC-2015-AdG
Summary The overall goal of 14Constraint is to enhance the availability and use of radiocarbon data as constraints for process-based understanding of the age distribution of carbon in and respired by soils and ecosystems. Carbon enters ecosystems by a single process, photosynthesis. It returns by a range of processes that depend on plant allocation and turnover, the efficiency and rate of litter decomposition and the mechanisms stabilizing C in soils. Thus the age distribution of respired CO2 and the age of C residing in plants, litter and soils are diagnostic properties of ecosystems that provide key constraints for testing carbon cycle models. Radiocarbon, especially the transit of ‘bomb’ 14C created in the 1960s, is a powerful tool for tracing C exchange on decadal to centennial timescales. 14Constraint will assemble a global database of existing radiocarbon data (WP1) and demonstrate how they can constrain and test ecosystem carbon cycle models. WP2 will fill data gaps and add new data from sites in key biomes that have ancillary data sufficient to construct belowground C and 14C budgets. These detailed investigations will focus on the role of time lags caused in necromass and fine roots, as well as the dynamics of deep soil C. Spatial extrapolation beyond the WP2 sites will require sampling along global gradients designed to explore the relative roles of mineralogy, vegetation and climate on the age of C in and respired from soil (WP3). Products of this 14Constraint will include the first publicly available global synthesis of terrestrial 14C data, and will add over 5000 new measurements. This project is urgently needed before atmospheric 14C levels decline to below 1950 levels as expected in the next decade.
Summary
The overall goal of 14Constraint is to enhance the availability and use of radiocarbon data as constraints for process-based understanding of the age distribution of carbon in and respired by soils and ecosystems. Carbon enters ecosystems by a single process, photosynthesis. It returns by a range of processes that depend on plant allocation and turnover, the efficiency and rate of litter decomposition and the mechanisms stabilizing C in soils. Thus the age distribution of respired CO2 and the age of C residing in plants, litter and soils are diagnostic properties of ecosystems that provide key constraints for testing carbon cycle models. Radiocarbon, especially the transit of ‘bomb’ 14C created in the 1960s, is a powerful tool for tracing C exchange on decadal to centennial timescales. 14Constraint will assemble a global database of existing radiocarbon data (WP1) and demonstrate how they can constrain and test ecosystem carbon cycle models. WP2 will fill data gaps and add new data from sites in key biomes that have ancillary data sufficient to construct belowground C and 14C budgets. These detailed investigations will focus on the role of time lags caused in necromass and fine roots, as well as the dynamics of deep soil C. Spatial extrapolation beyond the WP2 sites will require sampling along global gradients designed to explore the relative roles of mineralogy, vegetation and climate on the age of C in and respired from soil (WP3). Products of this 14Constraint will include the first publicly available global synthesis of terrestrial 14C data, and will add over 5000 new measurements. This project is urgently needed before atmospheric 14C levels decline to below 1950 levels as expected in the next decade.
Max ERC Funding
2 283 747 €
Duration
Start date: 2016-12-01, End date: 2021-11-30
Project acronym 4D IMAGING
Project Towards 4D Imaging of Fundamental Processes on the Atomic and Sub-Atomic Scale
Researcher (PI) Ferenc Krausz
Host Institution (HI) LUDWIG-MAXIMILIANS-UNIVERSITAET MUENCHEN
Country Germany
Call Details Advanced Grant (AdG), PE2, ERC-2009-AdG
Summary State-of-the-art microscopy and diffraction imaging provides insight into the atomic and sub-atomic structure of matter. They permit determination of the positions of atoms in a crystal lattice or in a molecule as well as the distribution of electrons inside atoms. State-of-the-art time-resolved spectroscopy with femtosecond and attosecond resolution provides access to dynamic changes in the atomic and electronic structure of matter. Our proposal aims at combining these two frontier techniques of XXI century science to make a long-standing dream of scientist come true: the direct observation of atoms and electrons in their natural state: in motion. Shifts in the atoms positions by tens to hundreds of picometers can make chemical bonds break apart or newly form, changing the structure and/or chemical composition of matter. Electronic motion on similar scales may result in the emission of light, or the initiation of processes that lead to a change in physical or chemical properties, or biological function. These motions happen within femtoseconds and attoseconds, respectively. To make them observable, we need a 4-dimensional (4D) imaging technique capable of recording freeze-frame snapshots of microscopic systems with picometer spatial resolution and femtosecond to attosecond exposure time. The motion can then be visualized by slow-motion replay of the freeze-frame shots. The goal of this project is to develop a 4D imaging technique that will ultimately offer picometer resolution is space and attosecond resolution in time.
Summary
State-of-the-art microscopy and diffraction imaging provides insight into the atomic and sub-atomic structure of matter. They permit determination of the positions of atoms in a crystal lattice or in a molecule as well as the distribution of electrons inside atoms. State-of-the-art time-resolved spectroscopy with femtosecond and attosecond resolution provides access to dynamic changes in the atomic and electronic structure of matter. Our proposal aims at combining these two frontier techniques of XXI century science to make a long-standing dream of scientist come true: the direct observation of atoms and electrons in their natural state: in motion. Shifts in the atoms positions by tens to hundreds of picometers can make chemical bonds break apart or newly form, changing the structure and/or chemical composition of matter. Electronic motion on similar scales may result in the emission of light, or the initiation of processes that lead to a change in physical or chemical properties, or biological function. These motions happen within femtoseconds and attoseconds, respectively. To make them observable, we need a 4-dimensional (4D) imaging technique capable of recording freeze-frame snapshots of microscopic systems with picometer spatial resolution and femtosecond to attosecond exposure time. The motion can then be visualized by slow-motion replay of the freeze-frame shots. The goal of this project is to develop a 4D imaging technique that will ultimately offer picometer resolution is space and attosecond resolution in time.
Max ERC Funding
2 500 000 €
Duration
Start date: 2010-03-01, End date: 2015-02-28
Project acronym 4D-EEG
Project 4D-EEG: A new tool to investigate the spatial and temporal activity patterns in the brain
Researcher (PI) Franciscus C.T. Van Der Helm
Host Institution (HI) TECHNISCHE UNIVERSITEIT DELFT
Country Netherlands
Call Details Advanced Grant (AdG), PE7, ERC-2011-ADG_20110209
Summary Our first goal is to develop a new tool to determine brain activity with a high temporal (< 1 msec) and spatial (about 2 mm) resolution with the focus on motor control. High density EEG (up to 256 electrodes) will be used for EEG source localization. Advanced force-controlled robot manipulators will be used to impose continuous force perturbations to the joints. Advanced closed-loop system identification algorithms will identify the dynamic EEG response of multiple brain areas to the perturbation, leading to a functional interpretation of EEG. The propagation of the signal in time and 3D space through the cortex can be monitored: 4D-EEG. Preliminary experiments with EEG localization have shown that the continuous force perturbations resulted in a better signal-to-noise ratio and coherence than the current method using transient perturbations..
4D-EEG will be a direct measure of the neural activity in the brain with an excellent temporal response and easy to use in combination with motor control tasks. The new 4D-EEG method is expected to provide a breakthrough in comparison to functional MRI (fMRI) when elucidating the meaning of cortical map plasticity in motor learning.
Our second goal is to generate and validate new hypotheses about the longitudinal relationship between motor learning and cortical map plasticity by clinically using 4D-EEG in an intensive, repeated measurement design in patients suffering from a stroke. The application of 4D-EEG combined with haptic robots will allow us to discover how dynamics in cortical map plasticity are related with upper limb recovery after stroke in terms of neural repair and using behavioral compensation strategies while performing a meaningful motor tasks.. The non-invasive 4D-EEG technique combined with haptic robots will open the window about what and how patients (re)learn when showing motor recovery after stroke in order to allow us to develop more effective patient-tailored therapies in neuro-rehabilitation.
Summary
Our first goal is to develop a new tool to determine brain activity with a high temporal (< 1 msec) and spatial (about 2 mm) resolution with the focus on motor control. High density EEG (up to 256 electrodes) will be used for EEG source localization. Advanced force-controlled robot manipulators will be used to impose continuous force perturbations to the joints. Advanced closed-loop system identification algorithms will identify the dynamic EEG response of multiple brain areas to the perturbation, leading to a functional interpretation of EEG. The propagation of the signal in time and 3D space through the cortex can be monitored: 4D-EEG. Preliminary experiments with EEG localization have shown that the continuous force perturbations resulted in a better signal-to-noise ratio and coherence than the current method using transient perturbations..
4D-EEG will be a direct measure of the neural activity in the brain with an excellent temporal response and easy to use in combination with motor control tasks. The new 4D-EEG method is expected to provide a breakthrough in comparison to functional MRI (fMRI) when elucidating the meaning of cortical map plasticity in motor learning.
Our second goal is to generate and validate new hypotheses about the longitudinal relationship between motor learning and cortical map plasticity by clinically using 4D-EEG in an intensive, repeated measurement design in patients suffering from a stroke. The application of 4D-EEG combined with haptic robots will allow us to discover how dynamics in cortical map plasticity are related with upper limb recovery after stroke in terms of neural repair and using behavioral compensation strategies while performing a meaningful motor tasks.. The non-invasive 4D-EEG technique combined with haptic robots will open the window about what and how patients (re)learn when showing motor recovery after stroke in order to allow us to develop more effective patient-tailored therapies in neuro-rehabilitation.
Max ERC Funding
3 477 202 €
Duration
Start date: 2012-06-01, End date: 2017-05-31
Project acronym AARTFAAC
Project Amsterdam-ASTRON Radio Transient Facility And Analysis Centre: Probing the Extremes of Astrophysics
Researcher (PI) Ralph Antoine Marie Joseph Wijers
Host Institution (HI) UNIVERSITEIT VAN AMSTERDAM
Country Netherlands
Call Details Advanced Grant (AdG), PE9, ERC-2009-AdG
Summary Some of the most extreme tests of physical law come from its manifestations in the behaviour of black holes and neutron stars, and as such these objects should be used as fundamental physics labs. Due to advances in both theoretical work and observational techniques, I have a major opportunity now to significantly push this agenda forward and get better answers to questions like: How are black holes born? How can energy be extracted from black holes? What is the origin of magnetic fields and cosmic rays in jets and shocks? Is their primary energy stream hadronic or magnetic? I propose to do this by exploiting the advent of wide-field radio astronomy: extreme objects are very rare and usually transient, so not only must one survey large areas of sky, but also must one do this often. I propose to form and shape a group that will use the LOFAR wide-field radio telescope to hunt for these extreme transients and systematically collect enough well-documented examples of the behaviour of each type of transient. Furthermore, I propose to expand LOFAR with a true 24/7 all-sky monitor to catch and study even the rarest of events. Next, I will use my experience in gamma-ray burst followup to conduct a vigorous multi-wavelength programme of study of these objects, to constrain their physics from as many angles as possible. This will eventually include results from multi-messenger astrophysics, in which we use neutrinos, gravity waves, and other non-electromagnetic messengers as extra diagnostics of the physics of these sources. Finally, I will build on my experience in modelling accretion phenomena and relativistic explosions to develop a theoretical framework for these phenomena and constrain the resulting models with the rich data sets we obtain.
Summary
Some of the most extreme tests of physical law come from its manifestations in the behaviour of black holes and neutron stars, and as such these objects should be used as fundamental physics labs. Due to advances in both theoretical work and observational techniques, I have a major opportunity now to significantly push this agenda forward and get better answers to questions like: How are black holes born? How can energy be extracted from black holes? What is the origin of magnetic fields and cosmic rays in jets and shocks? Is their primary energy stream hadronic or magnetic? I propose to do this by exploiting the advent of wide-field radio astronomy: extreme objects are very rare and usually transient, so not only must one survey large areas of sky, but also must one do this often. I propose to form and shape a group that will use the LOFAR wide-field radio telescope to hunt for these extreme transients and systematically collect enough well-documented examples of the behaviour of each type of transient. Furthermore, I propose to expand LOFAR with a true 24/7 all-sky monitor to catch and study even the rarest of events. Next, I will use my experience in gamma-ray burst followup to conduct a vigorous multi-wavelength programme of study of these objects, to constrain their physics from as many angles as possible. This will eventually include results from multi-messenger astrophysics, in which we use neutrinos, gravity waves, and other non-electromagnetic messengers as extra diagnostics of the physics of these sources. Finally, I will build on my experience in modelling accretion phenomena and relativistic explosions to develop a theoretical framework for these phenomena and constrain the resulting models with the rich data sets we obtain.
Max ERC Funding
3 499 128 €
Duration
Start date: 2010-10-01, End date: 2016-09-30
Project acronym AccelOnChip
Project Attosecond physics, free electron quantum optics, photon generation and radiation biology with the accelerator on a photonic chip
Researcher (PI) Peter HOMMELHOFF
Host Institution (HI) FRIEDRICH-ALEXANDER-UNIVERSITAET ERLANGEN-NUERNBERG
Country Germany
Call Details Advanced Grant (AdG), PE2, ERC-2019-ADG
Summary Resting on our demonstration of laser-driven nanophotonics-based particle acceleration, we propose to build a miniature particle accelerator on a photonic chip, comprising high gradient acceleration and fully optical field-based electron control. The resulting electron beam has outstanding space-time properties: It is bunched on sub-femtosecond timescales, is nanometres wide and coherent. We aim at utilizing this new form of all-optical free electron control in a broad research program with five exciting objectives:
(1) Build a 5 MeV accelerator on a photonic chip in a shoebox-sized vessel,
(2) Perform ultrafast diffraction with attosecond and even zeptosecond electron pulses,
(3) Generate photons on chip at various wavelengths (IR to x-ray),
(4) Couple quantum-coherently electron wavepackets and light in multiple interaction zones, and
(5) Conduct radiobiological experiments, akin to the new FLASH radiotherapy and Microbeam cell treat-ment.
AccelOnChip will enable five science objectives potentially shifting the horizons of today’s knowledge and capabilities around ultrafast electron imaging, photon generation, (quantum) electron-light coupling, and radiotherapy dramatically. Moreover, AccelOnChip promises to democratize accelerators: the accelerator on a chip will be based on inexpensive nanofabrication technology. We foresee that every university lab can have access to particle and light sources, today only accessible at large facilities. Last, AccelOnChip will take decisive steps towards an ultracompact electron beam radiation device to be put into the tip of a catheter, a potentially disruptive radiation therapy device facilitating new treatment forms. AccelOnChip is a cross-disciplinary high risk/high return project combining and benefiting nanophotonics, accelerator science, ultra-fast physics, materials science, coherent light-matter coupling, light generation, and radiology - and is based on my group’s unique expertise acquired in recent years.
Summary
Resting on our demonstration of laser-driven nanophotonics-based particle acceleration, we propose to build a miniature particle accelerator on a photonic chip, comprising high gradient acceleration and fully optical field-based electron control. The resulting electron beam has outstanding space-time properties: It is bunched on sub-femtosecond timescales, is nanometres wide and coherent. We aim at utilizing this new form of all-optical free electron control in a broad research program with five exciting objectives:
(1) Build a 5 MeV accelerator on a photonic chip in a shoebox-sized vessel,
(2) Perform ultrafast diffraction with attosecond and even zeptosecond electron pulses,
(3) Generate photons on chip at various wavelengths (IR to x-ray),
(4) Couple quantum-coherently electron wavepackets and light in multiple interaction zones, and
(5) Conduct radiobiological experiments, akin to the new FLASH radiotherapy and Microbeam cell treat-ment.
AccelOnChip will enable five science objectives potentially shifting the horizons of today’s knowledge and capabilities around ultrafast electron imaging, photon generation, (quantum) electron-light coupling, and radiotherapy dramatically. Moreover, AccelOnChip promises to democratize accelerators: the accelerator on a chip will be based on inexpensive nanofabrication technology. We foresee that every university lab can have access to particle and light sources, today only accessible at large facilities. Last, AccelOnChip will take decisive steps towards an ultracompact electron beam radiation device to be put into the tip of a catheter, a potentially disruptive radiation therapy device facilitating new treatment forms. AccelOnChip is a cross-disciplinary high risk/high return project combining and benefiting nanophotonics, accelerator science, ultra-fast physics, materials science, coherent light-matter coupling, light generation, and radiology - and is based on my group’s unique expertise acquired in recent years.
Max ERC Funding
2 498 508 €
Duration
Start date: 2020-10-01, End date: 2025-09-30
Project acronym ACCRETE
Project Accretion and Early Differentiation of the Earth and Terrestrial Planets
Researcher (PI) David Crowhurst Rubie
Host Institution (HI) UNIVERSITAT BAYREUTH
Country Germany
Call Details Advanced Grant (AdG), PE10, ERC-2011-ADG_20110209
Summary Formation of the Earth and the other terrestrial planets of our Solar System (Mercury, Venus and Mars) commenced 4.568 billion years ago and occurred on a time scale of about 100 million years. These planets grew by the process of accretion, which involved numerous collisions with smaller (Moon- to Mars-size) bodies. Impacts with such bodies released sufficient energy to cause large-scale melting and the formation of deep “magma oceans”. Such magma oceans enabled liquid metal to separate from liquid silicate, sink and accumulate to form the metallic cores of the planets. Thus core formation in terrestrial planets was a multistage process, intimately related to the major impacts during accretion, that determined the chemistry of planetary mantles. However, until now, accretion, as modelled by astrophysicists, and core formation, as modelled by geochemists, have been treated as completely independent processes. The fundamental and crucial aim of this ambitious interdisciplinary proposal is to integrate astrophysical models of planetary accretion with geochemical models of planetary differentiation together with cosmochemical constraints obtained from meteorites. The research will involve integrating new models of planetary accretion with core formation models based on the partitioning of a large number of elements between liquid metal and liquid silicate that we will determine experimentally at pressures up to about 100 gigapascals (equivalent to 2400 km deep in the Earth). By comparing our results with the known physical and chemical characteristics of the terrestrial planets, we will obtain a comprehensive understanding of how these planets formed, grew and evolved, both physically and chemically, with time. The integration of chemistry and planetary differentiation with accretion models is a new ground-breaking concept that will lead, through synergies and feedback, to major new advances in the Earth and planetary sciences.
Summary
Formation of the Earth and the other terrestrial planets of our Solar System (Mercury, Venus and Mars) commenced 4.568 billion years ago and occurred on a time scale of about 100 million years. These planets grew by the process of accretion, which involved numerous collisions with smaller (Moon- to Mars-size) bodies. Impacts with such bodies released sufficient energy to cause large-scale melting and the formation of deep “magma oceans”. Such magma oceans enabled liquid metal to separate from liquid silicate, sink and accumulate to form the metallic cores of the planets. Thus core formation in terrestrial planets was a multistage process, intimately related to the major impacts during accretion, that determined the chemistry of planetary mantles. However, until now, accretion, as modelled by astrophysicists, and core formation, as modelled by geochemists, have been treated as completely independent processes. The fundamental and crucial aim of this ambitious interdisciplinary proposal is to integrate astrophysical models of planetary accretion with geochemical models of planetary differentiation together with cosmochemical constraints obtained from meteorites. The research will involve integrating new models of planetary accretion with core formation models based on the partitioning of a large number of elements between liquid metal and liquid silicate that we will determine experimentally at pressures up to about 100 gigapascals (equivalent to 2400 km deep in the Earth). By comparing our results with the known physical and chemical characteristics of the terrestrial planets, we will obtain a comprehensive understanding of how these planets formed, grew and evolved, both physically and chemically, with time. The integration of chemistry and planetary differentiation with accretion models is a new ground-breaking concept that will lead, through synergies and feedback, to major new advances in the Earth and planetary sciences.
Max ERC Funding
1 826 200 €
Duration
Start date: 2012-05-01, End date: 2018-04-30
Project acronym ACETOGENS
Project Acetogenic bacteria: from basic physiology via gene regulation to application in industrial biotechnology
Researcher (PI) Volker MueLLER
Host Institution (HI) JOHANN WOLFGANG GOETHE-UNIVERSITATFRANKFURT AM MAIN
Country Germany
Call Details Advanced Grant (AdG), LS9, ERC-2016-ADG
Summary Demand for biofuels and other biologically derived commodities is growing worldwide as efforts increase to reduce reliance on fossil fuels and to limit climate change. Most commercial approaches rely on fermentations of organic matter with its inherent problems in producing CO2 and being in conflict with the food supply of humans. These problems are avoided if CO2 can be used as feedstock. Autotrophic organisms can fix CO2 by producing chemicals that are used as building blocks for the synthesis of cellular components (Biomass). Acetate-forming bacteria (acetogens) do neither require light nor oxygen for this and they can be used in bioreactors to reduce CO2 with hydrogen gas, carbon monoxide or an organic substrate. Gas fermentation using these bacteria has already been realized on an industrial level in two pre-commercial 100,000 gal/yr demonstration facilities to produce fuel ethanol from abundant waste gas resources (by LanzaTech). Acetogens can metabolise a wide variety of substrates that could be used for the production of biocommodities. However, their broad use to produce biofuels and platform chemicals from substrates other than gases or together with gases is hampered by our very limited knowledge about their metabolism and ability to use different substrates simultaneously. Nearly nothing is known about regulatory processes involved in substrate utilization or product formation but this is an absolute requirement for metabolic engineering approaches. The aim of this project is to provide this basic knowledge about metabolic routes in the acetogenic model strain Acetobacterium woodii and their regulation. We will unravel the function of “organelles” found in this bacterium and explore their potential as bio-nanoreactors for the production of biocommodities and pave the road for the industrial use of A. woodii in energy (hydrogen) storage. Thus, this project creates cutting-edge opportunities for the development of biosustainable technologies in Europe.
Summary
Demand for biofuels and other biologically derived commodities is growing worldwide as efforts increase to reduce reliance on fossil fuels and to limit climate change. Most commercial approaches rely on fermentations of organic matter with its inherent problems in producing CO2 and being in conflict with the food supply of humans. These problems are avoided if CO2 can be used as feedstock. Autotrophic organisms can fix CO2 by producing chemicals that are used as building blocks for the synthesis of cellular components (Biomass). Acetate-forming bacteria (acetogens) do neither require light nor oxygen for this and they can be used in bioreactors to reduce CO2 with hydrogen gas, carbon monoxide or an organic substrate. Gas fermentation using these bacteria has already been realized on an industrial level in two pre-commercial 100,000 gal/yr demonstration facilities to produce fuel ethanol from abundant waste gas resources (by LanzaTech). Acetogens can metabolise a wide variety of substrates that could be used for the production of biocommodities. However, their broad use to produce biofuels and platform chemicals from substrates other than gases or together with gases is hampered by our very limited knowledge about their metabolism and ability to use different substrates simultaneously. Nearly nothing is known about regulatory processes involved in substrate utilization or product formation but this is an absolute requirement for metabolic engineering approaches. The aim of this project is to provide this basic knowledge about metabolic routes in the acetogenic model strain Acetobacterium woodii and their regulation. We will unravel the function of “organelles” found in this bacterium and explore their potential as bio-nanoreactors for the production of biocommodities and pave the road for the industrial use of A. woodii in energy (hydrogen) storage. Thus, this project creates cutting-edge opportunities for the development of biosustainable technologies in Europe.
Max ERC Funding
2 497 140 €
Duration
Start date: 2017-10-01, End date: 2022-09-30
Project acronym ACROSS
Project 3D Reconstruction and Modeling across Different Levels of Abstraction
Researcher (PI) Leif Kobbelt
Host Institution (HI) RHEINISCH-WESTFAELISCHE TECHNISCHE HOCHSCHULE AACHEN
Country Germany
Call Details Advanced Grant (AdG), PE6, ERC-2013-ADG
Summary "Digital 3D models are gaining more and more importance in diverse application fields ranging from computer graphics, multimedia and simulation sciences to engineering, architecture, and medicine. Powerful technologies to digitize the 3D shape of real objects and scenes are becoming available even to consumers. However, the raw geometric data emerging from, e.g., 3D scanning or multi-view stereo often lacks a consistent structure and meta-information which are necessary for the effective deployment of such models in sophisticated down-stream applications like animation, simulation, or CAD/CAM that go beyond mere visualization. Our goal is to develop new fundamental algorithms which transform raw geometric input data into augmented 3D models that are equipped with structural meta information such as feature aligned meshes, patch segmentations, local and global geometric constraints, statistical shape variation data, or even procedural descriptions. Our methodological approach is inspired by the human perceptual system that integrates bottom-up (data-driven) and top-down (model-driven) mechanisms in its hierarchical processing. Similarly we combine algorithms operating on different levels of abstraction into reconstruction and modeling networks. Instead of developing an individual solution for each specific application scenario, we create an eco-system of algorithms for automatic processing and interactive design of highly complex 3D models. A key concept is the information flow across all levels of abstraction in a bottom-up as well as top-down fashion. We not only aim at optimizing geometric representations but in fact at bridging the gap between reconstruction and recognition of geometric objects. The results from this project will make it possible to bring 3D models of real world objects into many highly relevant applications in science, industry, and entertainment, greatly reducing the excessive manual effort that is still necessary today."
Summary
"Digital 3D models are gaining more and more importance in diverse application fields ranging from computer graphics, multimedia and simulation sciences to engineering, architecture, and medicine. Powerful technologies to digitize the 3D shape of real objects and scenes are becoming available even to consumers. However, the raw geometric data emerging from, e.g., 3D scanning or multi-view stereo often lacks a consistent structure and meta-information which are necessary for the effective deployment of such models in sophisticated down-stream applications like animation, simulation, or CAD/CAM that go beyond mere visualization. Our goal is to develop new fundamental algorithms which transform raw geometric input data into augmented 3D models that are equipped with structural meta information such as feature aligned meshes, patch segmentations, local and global geometric constraints, statistical shape variation data, or even procedural descriptions. Our methodological approach is inspired by the human perceptual system that integrates bottom-up (data-driven) and top-down (model-driven) mechanisms in its hierarchical processing. Similarly we combine algorithms operating on different levels of abstraction into reconstruction and modeling networks. Instead of developing an individual solution for each specific application scenario, we create an eco-system of algorithms for automatic processing and interactive design of highly complex 3D models. A key concept is the information flow across all levels of abstraction in a bottom-up as well as top-down fashion. We not only aim at optimizing geometric representations but in fact at bridging the gap between reconstruction and recognition of geometric objects. The results from this project will make it possible to bring 3D models of real world objects into many highly relevant applications in science, industry, and entertainment, greatly reducing the excessive manual effort that is still necessary today."
Max ERC Funding
2 482 000 €
Duration
Start date: 2014-03-01, End date: 2019-02-28
Project acronym ActiveCortex
Project Active dendrites and cortical associations
Researcher (PI) Matthew Larkum
Host Institution (HI) HUMBOLDT-UNIVERSITAET ZU BERLIN
Country Germany
Call Details Advanced Grant (AdG), LS5, ERC-2014-ADG
Summary Converging studies from psychophysics in humans to single-cell recordings in monkeys and rodents indicate that most important cognitive processes depend on both feed-forward and feedback information interacting in the brain. Intriguingly, feedback to early cortical processing stages appears to play a causal role in these processes. Despite the central nature of this fact to understanding brain cognition, there is still no mechanistic explanation as to how this information could be so pivotal and what events take place that might be decisive. In this research program, we will test the hypothesis that the extraordinary performance of the cortex derives from an associative mechanism built into the basic neuronal unit: the pyramidal cell. The hypothesis is based on two important facts: (1) feedback information is conveyed predominantly to layer 1 and (2) the apical tuft dendrites that are the major recipient of this feedback information are highly electrogenic.
The research program is divided in to several workpackages to systematically investigate the hypothesis at every level. As a whole, we will investigate the causal link between intrinsic cellular activity and behaviour. To do this we will use eletrophysiological and optical techniques to record and influence cell the intrinsic properties of cells (in particular dendritic activity) in vivo and in vitro in rodents. In vivo experiments will have a specific focus on context driven behaviour and in vitro experiments on the impact of long-range (feedback-carrying) fibers on cell activity. The study will also focus on synaptic plasticity at the interface of feedback information and dendritic electrogenesis, namely synapses on to the tuft dendrite of pyramidal neurons. The proposed program will not only address a long-standing and important hypothesis but also provide a transformational contribution towards understanding the operation of the cerebral cortex.
Summary
Converging studies from psychophysics in humans to single-cell recordings in monkeys and rodents indicate that most important cognitive processes depend on both feed-forward and feedback information interacting in the brain. Intriguingly, feedback to early cortical processing stages appears to play a causal role in these processes. Despite the central nature of this fact to understanding brain cognition, there is still no mechanistic explanation as to how this information could be so pivotal and what events take place that might be decisive. In this research program, we will test the hypothesis that the extraordinary performance of the cortex derives from an associative mechanism built into the basic neuronal unit: the pyramidal cell. The hypothesis is based on two important facts: (1) feedback information is conveyed predominantly to layer 1 and (2) the apical tuft dendrites that are the major recipient of this feedback information are highly electrogenic.
The research program is divided in to several workpackages to systematically investigate the hypothesis at every level. As a whole, we will investigate the causal link between intrinsic cellular activity and behaviour. To do this we will use eletrophysiological and optical techniques to record and influence cell the intrinsic properties of cells (in particular dendritic activity) in vivo and in vitro in rodents. In vivo experiments will have a specific focus on context driven behaviour and in vitro experiments on the impact of long-range (feedback-carrying) fibers on cell activity. The study will also focus on synaptic plasticity at the interface of feedback information and dendritic electrogenesis, namely synapses on to the tuft dendrite of pyramidal neurons. The proposed program will not only address a long-standing and important hypothesis but also provide a transformational contribution towards understanding the operation of the cerebral cortex.
Max ERC Funding
2 386 304 €
Duration
Start date: 2016-01-01, End date: 2020-12-31
Project acronym AEROCAT
Project Non-ordered nanoparticle superstructures – aerogels as efficient (electro-)catalysts
Researcher (PI) Alexander Eychmueller
Host Institution (HI) TECHNISCHE UNIVERSITAET DRESDEN
Country Germany
Call Details Advanced Grant (AdG), PE5, ERC-2013-ADG
Summary "AEROCAT aims at the elucidation of the potential of nanoparticle derived aerogels in catalytic applications. The materials will be produced from a variety of nanoparticles available in colloidal solutions, amongst which are metals and metal oxides. The evolving aerogels are extremely light, highly porous solids and have been demonstrated to exhibit in many cases the important properties of the nanosized objects they consist of instead of simply those of the respective bulk solids. The resulting aerogel materials will be characterized with respect to their morphology and composition and their resulting (electro-)catalytic properties examined in the light of the inherent electronic nature of the nanosized constituents. Using the knowledge gained within the project the aerogel materials will be further re-processed in order to exploit their full potential relevant to catalysis and electrocatalysis.
From the vast variety of possible applications of nanoparticle-based hydro- and aerogels like thermoelectrics, LEDs, pollutant clearance, sensorics and others we choose our strictly focused approach
(i) due to the paramount importance of catalysis for the Chemical Industry,
(ii) because we have successfully studied the Ethanol electrooxidation on a Pd-nanoparticle aerogel,
(iii) we have patented on the oxygen reduction reaction in fuel cells with bimetallic aerogels,
(iv) and we gained first and extremely promising results on the semi-hydrogenation of Acetylene on a mixed Pd/ZnO-nanoparticle aerogel.
With this we are on the forefront of a research field which impact might not be overestimated. We should quickly explore its potentials and transfer on a short track the knowledge gained into pre-industrial testing."
Summary
"AEROCAT aims at the elucidation of the potential of nanoparticle derived aerogels in catalytic applications. The materials will be produced from a variety of nanoparticles available in colloidal solutions, amongst which are metals and metal oxides. The evolving aerogels are extremely light, highly porous solids and have been demonstrated to exhibit in many cases the important properties of the nanosized objects they consist of instead of simply those of the respective bulk solids. The resulting aerogel materials will be characterized with respect to their morphology and composition and their resulting (electro-)catalytic properties examined in the light of the inherent electronic nature of the nanosized constituents. Using the knowledge gained within the project the aerogel materials will be further re-processed in order to exploit their full potential relevant to catalysis and electrocatalysis.
From the vast variety of possible applications of nanoparticle-based hydro- and aerogels like thermoelectrics, LEDs, pollutant clearance, sensorics and others we choose our strictly focused approach
(i) due to the paramount importance of catalysis for the Chemical Industry,
(ii) because we have successfully studied the Ethanol electrooxidation on a Pd-nanoparticle aerogel,
(iii) we have patented on the oxygen reduction reaction in fuel cells with bimetallic aerogels,
(iv) and we gained first and extremely promising results on the semi-hydrogenation of Acetylene on a mixed Pd/ZnO-nanoparticle aerogel.
With this we are on the forefront of a research field which impact might not be overestimated. We should quickly explore its potentials and transfer on a short track the knowledge gained into pre-industrial testing."
Max ERC Funding
2 194 000 €
Duration
Start date: 2014-02-01, End date: 2019-01-31
